LQW2BANR12J00# # indicates a package specification code. < List of part numbers with package codes > LQW2BANR12J00L , LQW2BANR12J00K , LQW2BANR12J00B Shape Notes In operating temperature exceeding +85℃, derating of current is necessary for LQW2BAN_00 series. Please apply the derating curve shown in chart according to the operating temperature. When applied Rated current to the Products, self temperature rise shall be limited to 40℃ max. Please confirm the below "Notice (Rating)". References Packaging code Specifications Minimum quantity φ180mm Embossed taping 2000 L size 2.09 ±0.2mm φ330mm Embossed taping 8000 W size 1.53 ±0.2mm Packing in bulk 500 T size 1.42 ±0.1mm Size code in inch (mm) 0805 (2015) Mass (Typ.) 1 piece 0.014g Specifications Inductance 120nH ±5% Inductance test frequency 150MHz Rated current (Itemp) (Based on Temperature rise) 970mA Max. of DC resistance 0.38Ω Q (min.) 57 Q test frequency 250MHz Self resonance frequency (min.) 1200MHz Operating temperature range (Self-temperature rise is included) -55∼125℃ 1 of 2 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. URL : http://www.murata.com/ Last updated: 2015/09/30 Chart of characteristic data (The charts below may show another part number which shares its characteristics.) Inductance-Frequency characteristics (Typ.) Q-Frequency characteristics (Typ.) Notice (Rating) 2 of 2 This PDF data has only typical specifications because there is no space for detailed specifications. Therefore, please reviewour product specifications or consult the approval sheet for product specifications before ordering. Last updated: 2015/09/30