HYBRID MODULES NTE No. Description 5700 Single Phase, Hybrid Bridge, Common Cathode, Freewheeling Diode Terminal Positions Schematic Diagrams G1 AC1 AC1 G1 (-) * AC2 AC2 G2 (+) Single Phase, Hybrid Bridge, Common Anode, Freewheeling Diode (+) G1 AC1 AC1 G1 Rating Unit VDRM 1200 V IT(Av) ** 1.25 A IT(RMS) ** 28 A ITSM (1 Cycle) 375 A PGT (Max) 8 W IGT (Max) 60 mA VGT (Max) 2 V VISO 2500 V VF (Max) 1.35 V G2 (-) 5701 Symbol (-) * AC2 IO *** AC2 G2 (+) G2 (-) 5702 (+) Single Phase, All SCR Bridge G3 G1 25 A I2T 580 A2sec IHold 100 mA dv/dt 200 V/μsec 5 Nm Terminal Torque AC1 AC2 G2 G1 AC1 (-) G3 ** Per SCR or Rectifier *** This Rating Applies to NTE5700, NTE5701, and NTE5702 Only * AC2 G4 (+) G4 G2 Diagram 452 (-) 5703 G2 AC1 G2 AC2 AC1 G1 AC2 G1 AC1 5704 AC2 * 1.250 (31.75) .200 (5.08) Hybrid Doubler AC1 AC1 (-) G1 5705 (+) SCR AC Switch (+) 1.910 (48.5) 2.500 (63.5) G1 .500 (12.7) (-) (+) .980 (24.89) Max SCR Doubler .600 (15.24) Max NOTE: Can be used with Heat Sink NTE441A G1 AC G1 (-) G2 (+) (-) AC1 G2 (+) * For transient protection, a Metal Oxide Varistor (MOV) may be connected externally across terminals AC1 & AC2. 1-124 NTE Electronics, Inc. D Voice (973) 748-5089 D FAX (973) 748-6224 • http://www.nteinc.com