POWERBLOCK MODULES THYRISTOR MODULES IT(AV) per Device 25A (Note 1) 55A (Note 1) 70A (Note 1) 90A (Note 1) 90A (Note 1) 160A (Note 1) 250A (Note 1) Circuit Number NTE Number NTE Number NTE Number NTE Number NTE Number NTE Number NTE Number 5708 5710 5714 5720 5724 5726 5728 1 2 5711 3 VRRM VF (Max) TJ 5721 5712 5722 1600V 1200V 1600V 1200V 1600V 1600V 1600V 1.55V @ 75A 1.4V @ 165A 1.48V @ 210A 1.4V @ 270A 1.4V @ 270A 1.7V @ 480A 1.73V @ 750A −405C to + 1255C −405C to + 1255C −405C to + 1255C −405 to + 1255C −405C to + 1255C −405C to + 1255C −405C to + 255C di/dt (TJ = +1255C) 100A/5 s 100A/5 s 50A/5 s 100A/5 s 100A/5 s 800A/5 s 100A/5 s dv/dt (TJ = +1255C) 500V/5 s 500V/5 s 800V/5 s 500V/5 s 500V/5 s 100V/5 s 800V/5 s 400A 1500A 1600A 1950A 1950A 5400A 8500A 670A2sec 9350A2sec 16000A2sec 15800A2sec 15800A2sec 146000A2sec 360000A2sec IGT (Max @ +255C) 150mA 150mA 100mA 150mA 150mA 150mA 180mA VGT (Max @ +255C) 3.0V 3.0V 2.5V 3.0V 3.0V 2.5V 3.0V 500mW 500mW − 500mW 500mW − − VGM (Max, Reverse) 5V 5V − 5V 5V − − RTHJC (Per Module) 0.405C/W 0.255C/W 0.205C/W 0.145C/W 0.145C/W 0.175C/W 0.045C/W VISOL 2500VRMS 2500VRMS 2500VRMS 2500VRMS 2500VRMS 2500VRMS 3600VRMS 422 422 422 422 422 609 610 ITSM (1/2 Cycle, 60Hz) I2T (t = 8.3ms) PG(AV) Diag. No. RECTIFIER MODULES IT(AV) per Device 55A (Note 1) 60A (Note 1) 90A (Note 1) 100A (Note 2) 190A (Note 2) 200A (Note 3) 250A (Note 2) 320A (Note 2) Circuit Number NTE Number NTE Number NTE Number NTE Number NTE Number NTE Number NTE Number NTE Number 6220 6222 6230 6232 6234 6236 6238 4 5 VRRM 6218 1200V 1600V 1200V 1600V 1600V 600V 1600V 1600V VF (Max) 1.4V @ 165A 1.4V @ 165A 1.33V @ 270A 1.45V @ 330A 1.38V @ 600A 1.45V @ 200A 1.29V @ 785A 1.28V @ 1004A TJ -405 to + 1255C -405 to + 1255C -405 to + 1255C -405 to + 1505C -405 to + 1505C -555 to + 1505C -405 to + 1505C -405 to + 1505C di/dt (TJ = +1255C) 100A/5 s 100A/5 s − − − − − − dv/dt 500V/5 s 500V/5 s − − − − − − 1500A 1500A 2.3KA 2.6KA 8.0KA 2000A 7345A 10580A ITSM (1/2 Cycle, 60Hz) I2T (t = 8.3ms) 9350A2sec 9350A2sec 26.9A2s * 103 34.4A2s * 103 326A2s * 103 − 225000A2sec 466000A2sec IGT (Max @ +255C) − 150mA − − − − − − VGT (Max @ +255C) − 3.0V − − − − − − PG(AV) − 500mW − − − − − − VGM (Max, Reverse) − 5V − − − − − − RTHJC (Per Module) 0.255C/W 0.255C/W 0.475C/W 0.355C/W 0.215C/W 0.305C/W 0.165C/W 0.1255C/W VISOL 2500VRMS 2500VRMS 2500VRMS 2500VRMS 2500VRMS − 3000VRMS 3000VRMS 422 422 422 422 744 752 610 610 Diag. No. 3 PHASE BRIDGE MODULES IO per Diode Circuit Number 5 VRRM VF (Max) TJ ITSM (1 Cycle, 50Hz) RTHJC Diag. No. Note 1. TC = +855C 30A 30A 75A 75A 100A 100A NTE Number NTE Number NTE Number NTE Number NTE Number NTE Number 5740 5741 5742 5743 5744 5745 800V 1600V 800V 1600V 800V 1600V 1.1V @ 30A 1.1V @ 30A 1.15V @ 75A 1.15V @ 75A 1.15V @ 100A 1.3V @ 100A −405C to + 1255C −405C to + 1255C −405C to + 1505C −405C to + 1505C −405C to + 1505C −405C to + 1505C 500A 500A 1000A 1000A 1200A 1200A 0.445C/W 0.445C/W 0.35C/W 0.35C/W 0.225C/W 0.25C/W 757 757 618 618 618 745 Note 2. TC = +1005C Note 3. TC = +905C NTE Electronics, Inc. D Voice (973) 748−5089 D FAX (973) 748−6224 w http://www.nteinc.com 1−133 DIMENSIONAL OUTLINE DRAWINGS Circuit 1 Circuit 2 Circuit 3 G2 K2 + AC − + AC G2 K2 − K1 G1 Circuit 4 K1 G1 Circuit 5 + − Circuit 6 AC AC + AC AC AC + A − A − K/Case POWERBLOCK NOTES: MOUNTING: Careful mounting of powerblocks on the heatsink is one of the most important requirements of reliable satisfactory application. The contact surfaces of powerblock and heatsink must be clean, free from contamination and damage. Finish and flatness of heatsink contact surface should be ≤10μm. A thin and uniform film of interface thermal compound should be applied to contact surface of powerblock and heatsink. Fixing bolts have to be uniformly tightened with the specified mounting torque. Cross sections of busbars or cables have to be dimensioned so that heating up the powerblock will be avoided. This applies in particular for series connected fuses. MAINTENANCE: Powerblocks are maintenance−free. The assembly group should, however, be cleaned from time to time to ensure the insulation capability, the heat dissipation and thus the availability of the power converter. WARNING: Beryllium oxide is used in the powerblock assembly for insulation. Do not destroy the powerblock case because the beryllium oxide dust resulting from such action is hazardous if inhaled. Diagram 609 Diagram 422 AC + − G2 K2 K2 G2 K1 G1 + K1 G1 AC − .787 (20.0) .550 (14.0) .787 (20.0) .980 (25.0) .590 (15.0) .787 (20.0) .500 (12.7) .393 (10.0) M5 Screw (3 Places) 3.150 (80.0) .244 (6.2) Dia .110 (.028) x .036 (.009) Faston Terminals ** 1.195 (30.0) 1.180 (30.0) 3.620 (91.9) .270 (7.0) 1.340 (34.0) 3.150 (80.0) M6 x 1 Screw (3 Places) 1.850 (47.0) 1.180 (30.0) 3.700 (94.0) NOTE: Can be used with Heat Sink NTE441A ** NTE6232 does not contain these pins. 1−130 .980 (25.0) .244 (6.2) Dia (2 Places) NOTE: Can be used with Heat Sink NTE441A NTE Electronics, Inc. D Voice (973) 748−5089 D FAX (973) 748−6224 D http://www.nteinc.com DIMENSIONAL OUTLINE DRAWINGS Diagram 618 Diagram 610 AC AC + − AC AC K2 G2 G1 K1 + M8 x 1.25 Screw (3 Places) 1.380 (35.0) 1.120 (28.0) .240 (6.0) − 2.600 (66.0) .709 (18.0) 1.500 (38.0) .790 (20.0) 1.970 (50.0) .630 (16.0) .350 (9.0) 1.575 (40.0) .240 (6.0) 3.150 (80.0) 4.530 (115.0) 1.417 (36.0) (Note 1) M4 x 10 Screw (5 Places) 2.010 (51.0) 1.260 (32.0) .390 (10.0) .905 (23.0) 3.620 (92.0) 1.102 (28.0) 3.150 (80.0) NOTE: Can be used with Heat Sink NTE441A Note 1. Screws may be closer together at: 1.190 (30.0) Diagram 620 Diagram 619 + + AC AC AC − AC − 2.047 (52.0) 3.150 (80.0) 2.677 (68.0) 1.705 (43.3) .335 (8.5) AC AC .630 (16.0) .394 (10.0) .670 (17.0) .984 (25.0) .492 (12.5) .551 (14.0) .256 (6.5) 1.142 (29.0) .250 (6.35) Quick Connect (5 Places) .250 (6.35) Quick Connect (5 Places) .079 (2.0) .984 (25.0) .472 (12.0) 1.102 (28.0) Max NTE Electronics, Inc. D Voice (973) 748−5089 D FAX (973) 748−6224 D http://www.nteinc.com .630 (16.0) 1−131 DIMENSIONAL OUTLINE DRAWINGS Diagram 745 Diagram 744 AC AC AC + AC − + − .905 (23.0) .945 (24.0) .905 (23.0) .244 (6.2) Dia (2 Places) .670 (17.0) 1.340 (34.0) .630 (16.0) .275 (7.0) Dia 3.150 (80.0) 1.575 (40.0) .630 (16.0) M6 x 1 Screw (3 Places) .236 (6.0) 1.417 (36.0) .354 (9.0) 1.102 (28.0) 2.598 (66.0) 3.149 (80.0) M5 x 1 Screw (5 Places) 1.299 (33.0) 3.700 (94.0) 1.102 (28.0) .670 (17.0) Diagram 757 Diagram 752 + AC AC AC − Anode Anode 1.417 (36.0) .394 (10.0) .335 (8.5) Cathode/Case .394 (10.0) 3.642 (92.5) Max .984 (25.0) 3.150 (80.0) 1.378 (35.0) .283 (7.2) Dia Max (2 Places) .669 (17.0) .787 (20.0) 1.724 (43.8) M6 x 7 Screw (2 Places) .189 (4.8) Dia Max 2.047 (52.0) 1.004 (25.5) .250 (6.35) Quick Connect (5 Places) .677 (17.2) .118 (3.0) 1−132 .905 (23.0) .571 (14.5) .268 (6.8) NTE Electronics, Inc. D Voice (973) 748−5089 D FAX (973) 748−6224 D http://www.nteinc.com