R20 Series Features • • • • Designed for Continuous Duty Operation Dust Proof Cover Requires Minimal PC Board Area Switches Heavy Current with Low Coil Power General Purpose, 8 Amp DPDT DC Printed Circuit Mount Relay. D14 DPDT, 2 Form “C” 1.000 (25.4) .150 (3.81) .063 (1.6) Dia 8 Holes .200 (5.08) .300 (7.62) .650 (16.5) .770 (19.5) .910 (23.1) DC OPERATED Nom. Power Max. Contact Cur. @ 28VDC or 120VAC Diag No. Nom. Voltage Contact Arr. Coil Res. Ohms (Typ) R20−11D6−6 4.5/5VDC DPDT 25 800mW 8A D14 R20−11D6−12 12VDC DPDT 170 800mW 8A D14 R20−11D6−24 24VDC DPDT 1098 800mW 8A D14 NTE Type No. Electrical Specifications Contact Rating: 8 Amp @ 120/250 VAC, 8 Amp 30 VDC 1/6 HP @ 120 VAC Contact Material: Silver cadmium oxide, gold flashed Contact Resistance: 0.05 Ohms Max. initial Coil Coil Voltages: See Chart Pick−up Voltage: 80% of nominal or less @ 25°C Drop−out Voltage: 10% of actual pull−in (min) Resistance: See chart Operational Characteristics Timing Value . . . . . . Operate Time: Approx 10 mS Release Time: Approx 8 mS Max Switching Rate: 5 operations per second Insulation Characteristics Dielectric Strength Contact To Coil: 1500 VRMS Contact To Frame: 1500 VRMS Across Open Contacts: 500 VRMS Coil To Frame: 1000 VRMS Insulation Resistance: 1000 megohms Min. @ 500 VDC Environmental Characteristics Operating: −45°C to +75°C Mechanical Life: 5,000,000 operations min Weight Std: 14.2 gram approx. 4 NTE Electronics, Inc. D Voice (973) 748−5089 D FAX (973) 748−6224 D http://www.nteinc.com