R04 Series Features • • • • Screw Terminals Long Life Contacts Molded Plastic Barrier Insulation Molded Nylon Bobbin Coil Heavy Duty, 30 Amp, Open Frame Relay designed for Industrial Control, High Inrush Current Applications such as Motor Starting and Incandescent Lamp Loads. D3 D4 AC OPERATED Nom. Power Max. Contact Cur. @ 28VDC or 120VAC Diag No. D5 Nom. Voltage Contact Arr. Coil Res. Ohms (Typ) R04−3A30−12 12VAC SPST−NO — 10VA 30A D4 R04−3A30−24 24VAC SPST−NO — 10VA 30A D4 R04−3A30−120 120VAC SPST−NO — 10VA 30A D4 R04−3A30−240 240VAC SPST−NO — 10VA 30A D4 R04−5A30−12 12VAC SPDT — 10VA 30A D3 R04−5A30−24 24VAC SPDT — 10VA 30A D3 R04−5A30−110 120VAC SPDT — 10VA 30A D3 R04−5A30−240 240VAC SPDT — 10VA 30A D3 R04−7A30−12 12VAC DPST−NO — 10VA 30A D4 R04−7A30−24 24VAC DPST−NO — 10VA 30A D4 R04−7A30−120 120VAC DPST−NO — 10VA 30A D4 Electrical Specifications R04−7A30−240 240VAC DPST−NO — 10VA 30A D4 Contact R04−11A30−12 12VAC DPDT — 10VA 30A D5 R04−11A30−24 24VAC DPDT — 10VA 30A D5 R04−11A30−120 120VAC DPDT — 10VA 30A D5 R04−11A30−240 240VAC DPDT — 10VA 30A D5 R04−3D30−12 12VDC SPST−NO 70 2.0W 30A D4 R04−3D30−24 24VDC SPST−NO 290 2.0W 30A D4 R04−5D30−12 12VDC SPDT 70 2.0W 30A D3 R04−5D30−24 24VDC SPDT 290 2.0W 30A D3 R04−5D30−110 110VDC SPDT 6K 2.0W 30A D3 R04−7D30−12 12VDC DPST−NO 70 2.0W 30A D4 R04−7D30−24 24VDC DPST−NO 290 2.0W 30A D4 R04−7D30−110 110VDC DPST−NO 6K 2.0W 30A D4 R04−11D30−12 12VDC DPDT 70 2.0W 30A D5 R04−11D30−24 24VDC DPDT 290 2.0W 30A D5 R04−11D30−48 48VDC DPDT 1200 2.0W 30A D5 R04−11D30−110 110VDC DPDT 6K 2.0W 30A D5 NTE TYPE No. DC OPERATED DUST COVER, 2−PIECE ENAMELED STEEL ENCLOSURE NTE Electronics, Inc. Voice (973) 748−5089 Coil Coil Voltages: See Chart Coil Resistance: See chart Coil Power: Maximum Coil Dissipation: 4 watts DC Duty Cycle: Continuous Operational Characteristics Timing Values . . . . . Operate Time: 40mS or less Release Time: 30mS or less Insulation Characteristics Dielectric Strength Across Open Contacts: 1500 VRMS Between mutually insulated conductive elements: 2200 VRMS Environmental Characteristics Operating: −30° to +50°C (AC), −30°C to +60°C (DC) Non−operating (storage): −30°C to +100°C ACCESSORIES DESCRIPTION Contact Rating: 30 Amps up to 300VAC 50/60 Hz, 5 Amps @ 480/600VAC, 50/60Hz, 0.75pf (slightly inductive) load. 11/2 HP motor load at 120 thru 600VAC 50/60Hz. 30 Amps @ 28VDC, resistive load (each pole). 2 HP motor load at 200 thru 600VAC 50/60Hz when using two poles to switch both sides of load. Contact Material: Silver cadmium oxide, 5/16” Dia Weight NTE TYPE NO. RLY9165 D3 case: 8 ozs (227 grams)—approx D4 case: 9 ozs (255 grams)—approx D5 case: 11 ozs (311 grams)—approx FAX (973) 748−6224 http://www.nteinc.com 21 D3 2.437 (61.9) 1.625 (41.3) 2.500 (63.5) 1.874 (47.6) 2.189 (55.6) Max .375 (9.5) .188 (4.8) DIA. 2 Holes D4 2.437 (61.9) 1.625 (41.3) 2.500 (63.5) 2.252 (57.2) Max 1.874 (47.6) .375 (9.5) 2.531 (64.3) Max .188 (4.8) DIA. 2 Holes D5 1.625 (41.3) 2.500 (63.5) 1.874 (47.6) 2.311 (58.7) Max .375 (9.5) .188 (4.8) DIA. 2 Holes 3.125 (79.4) SPST−NO 1 Form “A” SPDT 1 Form “C” DPST−NO 2 Form “A” 14 14 24 A1 A1 A1 21 DPDT 2 Form “C” 22 24 A1 21 A2 11 12 13 22 A2 12 A2 NTE Electronics, Inc. 11 14 Voice (973) 748−5089 A2 11 FAX (973) 748−6224 14 http://www.nteinc.com