RS2 Series Features • • • Compatible with TTL Gates Push−On Connector Terminals Mounts on a TO3 Transistor Heat Sink Printed Circuit Board Mountable Solid State Relay, 7 Amp. D37 1.500 (38.1) 1.188 (30.2) .325 (8.3) INPUT .670 (17.0) Max OUTPUT .500 (12.7) .500 (12.7) .200 (5.08) .156 (3.8) Dia. .062 (1.6) Dia. Input Specifications Control Voltage: RS2−1D7−33 . . . . . . . . . . . . . . . . . 5VDC RS2−1D7−35 . . . . . . . . . . . . . . . . 12VDC Max Pick−up Voltage: RS2−1D7−33 . . . . . . . . . . . . . . . 4.3VDC RS2−1D7−35 . . . . . . . . . . . . . . 10.3VDC Min Drop−out Voltage: 1.5VDC Max Input Current: 15mADC .910 (23.1) Max .575 (14.6) Max .050 (1.3) Output Specifications Nom. Off−State Voltage: 120V (RMS) Non−Repetitive Peak Voltage: 400V Min−Max Off−State Voltage: 20V to 260V (RMS) Rated Load Current: 7A (RMS) Min. Load Current: 20mA (RMS) Non−Repetitive Surge Current: 50A Max. Off−State Leakage Current: 100µA (RMS) Max. On−State Voltage: 1.8V (RMS) Schematic showing typical TTL input connections +5V Supply Load Electrical Specifications Standard TTL Gate Operational Characteristics Turn−On . . . . 16mS Max Turn−Off . . . . 60mS Max Max. Rate of Rise of Off−State Voltage: Blocking . . . . . . 100V/µS Commutating . . . . 4V/µS Dielectric Strength (Input−Output Isolation): 2500VAC Insulation Resistance (@ 500VDC): 10,000MΩ Max. I2t for Fusing (8.3mS): 24 Response Time: +5V Supply Input 5VDC 15mA + Output 120 or 240VAC Up to 7 Amps R1 Environmental Characteristics Operating: −40°C to +65°C Storage: −40°C to +100°C NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com 105