RS4 Series Features • • • • Current or Voltage Input Types SCR Output Zero Crossing Switching Standard 16−Lead DIP Type Package with 4 Pins Printed Circuit Board Mountable Solid State Relay, 1 Amp. D63 16 10 1 8 .265 (6.7) Max .850 (21.6) Max .190 (4.8) .125 (3.18) .600 (15.24) .300 (7.6) Max .700 (17.78) Pin Connection Diagram Input Specifications RS4−1D1−A (Current Input Type) + Control Current Range: 10−35mA Must Turn−On Current: 10mA Must Turn−Off Current: 1mA Input − RS4−1D1−B (Voltage Input Type) AC Output AC Control Voltage Range: 3.5−10VDC Nom. Input Impedance: 270Ω Typ. Input Current (@ 5VDC): 15mA Must Turn−On Voltage: 3.5VDC Must Turn−Off Voltage: 1.0VDC Output Specifications Operating Voltage Range: 20−280V (RMS) Load Current Range: 0.01−1.0A (RMS) Transient Over−Voltage: 600V (Peak) Max. Surge Current (16.6ms): 30A (Peak) Min. Off−State dv/dt: 500V/µs at max. rated voltage Max. Off−State Leakage Current: 0.01mA (RMS) at rated voltage Max. On−State Voltage Drop: 1.2V (Peak) at rated current Max. Turn−On Time: 1/2 cycle Max. Turn−Off Time: 1/2 cycle Power Factor (Min.) with Max. Load: 0.5 Electrical Specifications Dielectric Strength (Input−Output Isolation): 3750V (RMS) Min. Insulation Resistance (@ 500VDC): 109 Ω Max. Capacitance (Input−Output): 2.0pF Environmental Characteristics Operating: −30°C to +80°C Storage: −30°C to +125°C NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com 107