Constant voltage LED Drivers For outdoor use LFU-35V Series, 35Watt FEATURES: Constant voltage output Universal AC input range Active power factor correction Short circuit, and over voltage protections Designed to worldwide safety standards for lighting Cooling by free air convection Class , no FG 100% burn-in test 2 year warranty Ⅱ Model Input voltage (Vac) Output voltage (Vdc) Output current (mA) Output power (W) Min. Max. 5 0 6000 30 12 0 3000 36 15 0 2400 36 LFU35-V24 24 0 1500 36 LFU35-V36 36 0 1000 36 LFU35-V5 LFU35-V12 LFU35-V15 90-264 ELECTRICAL Input Parameters Symbols Test Conditions / Comment Min. Typ. Max. Units Input voltage Vin -- 90 -- 264 Vac Input frequency Fline -- 47 -- 63 Hz Full load, Vin =115Vac -- -- 0.45 A Full load, Vin =230Vac -- -- 0.2 A Input current Iin Power factor PF 70%~100% load, Vin =230Vac -- 0.9 -- PF Inrush current Iinrush Cold start, Vin =230Vac -- 35 -- A η Full voltage, full load -- 90 -- % Ton_delay Cold start, power on -- 1000 -- ms Efficiency Turn-on delay time www.pairuigroup.com Page: 1 / 4 Date: 07/22/2015 Constant voltage LED Drivers For outdoor use LFU-35V Series, 35Watt ELECTRICAL Output Parameters Test Conditions / Comment Min. Typ. Max. Units LFU35-V5 0 -- 6000 mA LFU35-V12 0 -- 3000 mA LFU35-V15 0 -- 2400 mA LFU35-V24 0 -- 1500 mA LFU35-V36 0 -- 1000 mA LFU35-V5 -- 5 -- V LFU35-V12 -- 12 -- V LFU35-V15 -- 15 -- V LFU35-V24 -- 24 -- V LFU35-V36 -- 36 -- V -- -- -- ±5 -- % Line regulation Vout-line -- -- ±1.0 -- % Load regulation Vout-load -- -- ±2.0 -- % Vripple --- -- 5%Vo -- mVp-p -- Vin =115Vac, output load≥50% -- -- 20 % Output current Output voltage Output voltage accuracy Ripple THD Symbols Iout Vout Protection Overvoltage Typical: 110-150%. Short circuit Hiccup mode, it will recover automatically after fault condition is removed Environment Storage Ambient operating temperature Operating relative humidity MTBF Dimension(LxWxH) www.pairuigroup.com Tstorage Ta Humidity: 5% RH to 95% RH Startup at rated voltage (required Derating) Ha TMTBF Non condensing Full load, 220Vac input, ℃ 25 ambient temperature -40 -- +80 ℃ -25 -- +50 ℃ 10 -- 95 % 400 -- -- kHrs 148.0 x 40.0 x 30.0mm Page: 2 / 4 Date: 07/22/2015 Constant voltage LED Drivers For outdoor use LFU-35V Series, 35Watt ELECTRICAL Safety / EMC Safety standards UL8750, EN61347-1, EN61347-2-13 EMC EN55015, EN61000-3-2, EN61000-3-3, EN61000-4-2, 3, 4, 6, 8, 11, EN61547 ℃ Notes: 1. Unless otherwise specified, all the above parameters are measured at ambient temperature of 25 and Vin = 230Vac, rated load; 2. Ripple & Noise are measured at 20MHZ of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μF & 47μF parallel capacitor. MECHANICAL Unit: mm RECOMMEND INSTALLATION BLOCK DIAGRAM www.pairuigroup.com Page: 3 / 4 Date: 07/22/2015 Constant voltage LED Drivers For outdoor use LFU-35V Series, 35Watt ELECTRICAL CURVE DERATING CURVE www.pairuigroup.com STATIC CHARACTERISTIC CURVE Page: 4 / 4 Date: 07/22/2015