Constant current LED Drivers For outdoor use LGSU-150C Series, 150Watt FEATURES: Constant current output High Efficiency Universal AC input: 90-305VAC Active power factor correction Short circuit, over voltage, over temperature protections IP67 rating Optional dimming(0~10V, PWM, Timer) 3 year warranty Model Input voltage (Vac) Output current (mA) Output voltage (Vdc) Output power (W) Min. Max. LGSU150-C350 350 257 429 150 LGSU150-C450 450 200 333 150 LGSU150-C700 700 129 214 150 LGSU150-C1050 1050 86 143 150 1400 64 107 150 2100 43 71 150 LGSU150-C2800 2800 32 54 150 LGSU150-C3150 3150 29 48 150 LGSU150-C3500 3500 26 43 150 LGSU150-C4200 4200 22 36 150 LGSU150-C1400 LGSU150-C2100 90-305 Note: 1. Add suffix for dimming option, “D” (0~10V), “P” (PWM), “T” (Timer); 2. Other output models may available on request. ELECTRICAL Input Parameters Symbols Test Conditions / Comment Min. Typ. Max. Units Input voltage Vin --- 90 -- 305 Vac Input frequency Fline --- 47 -- 63 Hz Full load, Vin =1100Vac -- 1.6 -- A Full load, Vin = 220Vac -- 0.75 -- A Cold start, Vin = 230Vac -- -- 65 A Input current Inrush current www.pairuigroup.com Iin Iinrush Page: 1 / 7 Date: 12/18/2014 *Subject to change without prior notice. Constant current LED Drivers For outdoor use LGSU-150C Series, 150Watt ELECTRICAL Input Parameters Symbols Test Conditions / Comment Min. Typ. Max. Units Leakage current Ileakage Vin = 277Vac, 50Hz -- -- 0.75 mA Vin = 110Vac -- 0.99 -- PF Vin = 220Vac -- 0.96 -- PF Vin = 110Vac -- 90 -- % Vin = 220Vac -- 92 -- % --- -- 5 -- % LGSU150-C350 -- 446 -- V LGSU150-C450 -- 347 -- V LGSU150-C700 -- 223 -- V LGSU150-C1050 -- 149 -- V LGSU150-C1400 -- 111 -- V LGSU150-C2100 -- 78 -- V LGSU150-C2800 -- 58 -- V LGSU150-C3150 -- 52 -- V LGSU150-C3500 -- 47 -- V LGSU150-C4200 -- 40 -- V Power factor Efficiency PF η Output Output current accuracy No-load output voltage -- VNO-Load Line regulation Iout-line Vin from 90Vac to 305Vac -- -- 1 % Load regulation Iout-load Vout from min. to max. -- -- 3 % Turn-on delay time Ton_delay Cold start, power on -- -- 1 S -- --- -- 20 -- % Ripple Protection Over voltage Short circuit www.pairuigroup.com 115~130% rated output voltage. In latch mode, the power supply shall return to normal operation only after the power is turn-on again In hiccup mode, it will recover automatically after fault condition is removed Page: 2 / 7 Date: 12/18/2014 *Subject to change without prior notice. Constant current LED Drivers For outdoor use LGSU-150C Series, 150Watt ELECTRICAL Protection Parameters Over temperature Symbols Test Conditions / Comment Min. Typ. Max. Units It will recover to normal condition after over temperature condition is removed Environment Storage Ambient operating temperature Operating relative humidity MTBF Tstorage Humidity: 5% RH to 100% RH -40 -- +85 ℃ Ta Startup at rated voltage -35 -- +60 ℃ Ha Non condensing 10 -- 100 % -- 350 -- kHrs TMTBF Dimension(LxWxH) Full load, 220Vac input, ℃ 25 ambient temperature 228.0 x 65.5 x 39.5mm Weight 930g Safety / EMC Safety standards UL8750, UL935, UL1012, CSA-C22.2 No.107.1, EN61347-1, EN61347-2-13 EMI EN55015 EMC EN61000-3-2, EN61000-3-3, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, EN61547 ℃ and Notes: Unless otherwise specified, all the above parameters are measured at ambient temperature of 25 Vin = 90Vac to 305Vac. www.pairuigroup.com Page: 3 / 7 Date: 12/18/2014 *Subject to change without prior notice. Constant current LED Drivers For outdoor use LGSU-150C Series, 150Watt MECHANICAL No Dimming & Timer Dimming Version Unit: mm 0~10V Dimming Unit: mm www.pairuigroup.com Page: 4 / 7 Date: 12/18/2014 *Subject to change without prior notice. Constant current LED Drivers For outdoor use LGSU-150C Series, 150Watt MECHANICAL PWM Dimming Unit: mm DERATING CURVE www.pairuigroup.com STATIC CHARACTERISTIC CURVE Page: 5 / 7 Date: 12/18/2014 *Subject to change without prior notice. Constant current LED Drivers For outdoor use LGSU-150C Series, 150Watt DIMMING FUNCTION 0~10V Dimming External Resistor Dimming ITEM Conditions Value Maximum Voltage Normally 10~11V 0~12V 0-10V Input Current -- 0~10mA 10V Output Voltage Normally 11V 10~12V 10V Output Current -- 10mA Max. Note: 1. To make the driver operate properly, the load voltage must be controlled above the minimum voltage which close to 50% of the maximum output voltage is from any given mode. 2. The dimming signal can be less than 1V. As it is for 0-1V ,the output current can maintain 10% of the rated output current, but the connected LEDs may flicker. It's strongly recommended that keep dimming voltage bigger than 1V. 3. It is not allowed to connect the GND of dimming to the output, or the LED driver can not work as normal. www.pairuigroup.com Page: 6 / 7 Date: 12/18/2014 *Subject to change without prior notice. Constant current LED Drivers For outdoor use LGSU-150C Series, 150Watt DIMMING FUNCTION PWM Dimming ITEM Conditions Value Input Voltage -- 1-10V Input Current -- 10mA PWM Frequency -- 0.5-3KHz PWM Pulse Width -- 0~100% Timer Dimming Note: Above table for Timer dimming is just for reference, it can be adjusted according to the customer's requirements. www.pairuigroup.com Page: 7 / 7 Date: 12/18/2014 *Subject to change without prior notice.