NJU7392 2ch Pushbutton Interface EVR with eala Stereo Expander ■ GENERAL DESCRIPTION ■ PACKAGE OUTLINE The NJU7392 is a 2-channel electronic volume which include a Volume control, 2-in stereo input selector (with 1 x Differential input), eala Stereo Expander control (Stereo enhancement for narrow speakers), Bass boost control with ALC feature and a Stand-by function (Power-saving mode). The NJU7392 has also built-in push button interface for its volume, Bass Boost and eala Stereo Expander controls - making application possible without the use of micro-controller. The NJU7392 is suitable for low power application and also for application with narrow speaker such as mobile audio player and cradle speaker for mobile game. ■ FEATURES • Operating Voltage • Low operating current +2.7 to +5.5V 5mA typ. (Active mode) 1µA typ. (stand-by mode) • Low output noise 20µVrms typ. (eala Stereo Expander : ON) • Input Selector 2ch (single-end / quasi-differential) • Sound Space adjustment for narrow speaker • Pushbutton interface EVR 0 to -68dB, MUTE • Bass Boost with ALC • CMOS Technology • Package Outline SSOP32 ■ BLOCK DIAGRAM V+ 4 state Button mode V+ V+ Power Indicator V+ Expander Indicator Bass Indicator Bias V+ Power Button V+ Test Mode Vref GND Input 1L Output L Diff Input 1R eala Stereo Expander Input Selector Input 2L Bass Boost with Limitter VOL(+6dB) Output R Input 2R V+ V+ V+ V+ V+ Expander Button Down Treble Input1/Input2 for palmtop NJU7392 Ver.1.5 _E for laptop Up Bass Button for Bass for Limitter –1– NJU7392 ■ PIN CONFIGURATION 32 17 1 –2– 16 No. Symbol Function No Symbol Function 1 IN1L Lch Input 1 17 BBIND Bass Boost Indicator 2 IN1G Common Input 1 18 EXIND Stereo Expander Indicator 3 IN1R Rch Input 1 19 PWIND Power Indicator 4 IN2L Lch Input 2 20 TREBLE Treble Gain Setting 5 IN2R Rch Input 2 21 SWMODE Control Mode Setting 6 EXOUTL Stereo Expander Output L 22 IREF Reference Current 7 VOLINL Volume Input L 23 VREF Reference Voltage 8 EXOUTR Stereo Expander Output R 24 V+ Power Supply 9 VOLINR Volume Input R 25 GND Ground 10 SELSW Input Selector Setting 26 INT Limiter Recovery Time Setting 11 PWSW Power Switch 27 SENSE Limiter Threshold Setting 12 EXSW Stereo Expander Switch 28 BB1 Bass Boost Filter Terminal 1 13 BBSW Bass Boost Switch 29 BB2 Bass Boost Filter Terminal 2 14 UP Volume Up Switch 30 BB3 Bass Boost Filter Terminal 3 15 DOWN Volume Down Switch 31 OUTR Rch Output 16 TEST Test Terminal 32 OUTL Lch Output NJU7392 Ver.1.5_E NJU7392 ■ ABSOLUTE MAXIMUM RATING (Ta=25°C) PARAMETER SYMBOL RATING UNIT +7 V + Power Supply Voltage V Power Dissipation 1) 950* PD Maximum Input Voltage VIMAX Operating Temperature Range 0~V * Tstg V -40 ~ +85 o C -40 ~ +125 o C Topr Storage Temperature Range mW + 2) 1) EIA/JEDEC STANDARD Test board (76.2x114.3x1.6mm, 2layer, FR-4) mounting 2) * Don’t apply the input voltage that exceeds supply voltage. ■ ELECTRICAL RECOMMENDED OPERATING CONDITION (Ta=25°C) * PARAMETER Operating Voltage SYMBOL V TEST CONDITION MIN. TYP. MAX. UNIT - 2.7 3.3 5.5 V MIN. TYP. MAX. UNIT + ■ ELECTRICAL CHARACTERISTICS ●DC CHARACTERISTICS (Ta=25°C, V+=3.3V, unless otherwise specified) PARAMETER Operating Current Reference Voltage SYMBOL TEST CONDITION IDD1 No Signal, Active - 5.0 8.0 mA IDD2 No Signal, Standby - 0.1 1.0 µA VREF No signal 1.5 1.65 1.8 V ●AC CHARACTERISTICS + (Ta=25°C, V =3.3V, VIN=500mVrms, f=1kHz, Expander: OFF, Treble:0dB, Bass Boost: OFF, VOL:0dB, unless otherwise specified) TEST CONDITION PARAMETER SYMBOL IN L Maximum Input Voltage 1 VIM1 Maximum Input Voltage 2 VIM2 Maximum Input Voltage 3 VIM3 Output Noise Voltage 1 VNO1 Output Noise Voltage 2 VNO2 Output Noise Voltage 3 VNO3 Output Noise Voltage 4 VNO4 Total Harmonic Distortion 1 THD+N1 Total Harmonic Distortion 2 THD+N3 Total Harmonic Distortion 3 THD+N3 NJU7392 Ver.1.5_E R OUT VIN - L BW=400Hz-30kHz - VIN R Expander: Palmtop THD=1%, BW=400Hz-30kHz Expander: Palmtop Bass: ON, f=1kHz THD=1%, BW=400Hz-30kHz VIN 0 L 0 VIN R VIN VIN L VIN VIN R Rg=0Ω, A-weighted 0 0 L 0 0 R THD=1% Rg=0Ω, A-weighted 0 0 L VOL=-68dB 0 0 R Expander: Palmtop 0 0 L Rg=0Ω, A-weighted 0 0 R Expander: Palmtop Bass: ON, Rg=0Ω, A-weighted 0 0 L 0 0 R VIN - L - VIN R Expander: Palmtop VIN 0 L BW=400Hz-30kHz 0 VIN R Expander: Palmtop Bass: ON BW=400Hz-30kHz VIN 0 L 0 VIN R BW=400Hz-30kHz MIN. TYP. MAX. UNIT 550 580 - mVrms 550 580 - mVrms 550 580 - mVrms - -100 (10) -94 (20) dBV (µVrms) - -100 (10) -94 (20) dBV (µVrms) - -90 (32) -80 (100) dBV (µVrms) - -90 (32) -80 (100) dBV (µVrms) - 0.05 0.1 % - 0.1 0.5 % - 0.1 0.5 % –3– NJU7392 TEST CONDITION PARAMETER SYMBOL IN L VIN - L - VIN R VIN - L - VIN R Expander: Laptop VIN VIN L f=10kHz VIN VIN R Expander: Palmtop VIN VIN L f=10kHz VIN VIN R Bypass Gain GVBYP Treble=0dB Treble Gain GVTRE f=10kHz Expander Gain 1 GVEXP1 Expander Gain 2 GVEXP2 Expander Gain 3 GVEXP3 Expander: Laptop Expander Gain 4 GVEXP4 Expander: Palmtop Bass Gain GVBASS Maximum Attenuate level GVVOL-68 Mute Level Mute Channel Balance GCB Bass Limit Level VLIM Cross Talk CT Channel Separation CS R OUT VIN 0 L 0 VIN R VIN 0 L 0 VIN R Bass: ON VIN=100mVrms f=100Hz VIN VIN L VIN VIN R VOL=-68dB VIN - L - VIN R BW=400Hz-30kHz VOL=Mute BW=400Hz-30kHz VIN - L - VIN R VIN - L - VIN R Bass: ON VIN VIN L f=100Hz Selected Input: No Signal, Rg=0Ω BW=400Hz-30kHz VIN VIN R VIN - L - VIN R 0 VIN L VIN 0 R VIN=0.7Vrms Rg=0Ω BW=400Hz-30kHz MIN. TYP. MAX. UNIT -1.0 0.0 1.0 dB 2.0 3.0 4.0 dB 1.7 3.7 5.7 dB 3.0 5.0 7.0 dB 2.1 4.1 6.1 dB 3.3 5.3 7.3 dB 4.0 6.0 8.0 dB -70 -68 -66 dB - -90 -86 dB -1.0 0.0 1.0 dB 0.75 1.0 1.25 Vrms 70 80 - dB 70 80 - dB MIN. TYP. MAX. UNIT ● Indicator Output Block (Ta=25°C, V+=3.3V, unless otherwise specified) PARAMETER SYMBOL High Input Voltage VOH Low Input Voltage VOL ● Control Block (Ta=25°C, V TEST CONDITION ISOURCE=1mA (pin 17, pin 18, pin 19) ISINK=1mA (pin 17, pin 18, pin 19) + V *0.8 + - V + V 0 - V *0.2 V MIN. TYP. MAX. UNIT V+*0.8 - V+ V + PARAMETER High Input Voltage =3.3V, unless otherwise specified) SYMBOL TEST CONDITION VIH + Low Input Voltage VIL 0 - V *0.2 V Pull-Up Resistance RPULLUP - 100 - kΩ Mode Resistance range 1/4 RMODE1 pin 20, pin 21 0 - 40 kΩ Mode Resistance range 2/4 RMODE2 pin 20, pin 21 60 - 85 kΩ Mode Resistance range 3/4 RMODE3 pin 20, pin 21 110 - 130 kΩ Mode Resistance range 4/4 RMODE4 pin 20, pin 21 165 - ∞ kΩ Pulse Distinction Time 15 20 25 ms Auto Increment Distinction Time 0.7 1 1.2 s Auto Increment cycle 120 167 200 ms –4– NJU7392 Ver.1.5_E NJU7392 TERMINAL DESCRIPTION PIN NO. SYMBOL FUNCTION EQUIVALENT CIRCUIT V+ Lch Input 1 Rch Input 1 50k Ω 10pF V+ IN1G V+ 1k Ω Common Input 1 V+/2 10pF 10pF 500k Ω 2 V+/2 V+/2 10pF IN1L IN1R V+ 50k Ω 1 3 TERMINAL DC VOLTAGE VREF V+ IN2L IN2R Lch Input 2 Rch Input 2 50k Ω 10pF V+/2 V+/2 10pF 50k Ω 4 5 V+ VREF V+ 6 8 17 18 19 28 30 31 32 EXO UT L EXOUTR BBIND EXIND P W IND BB1 BB3 OU TR OU TL NJU7392 Ver.1.5_E Stereo Expander Output L Stereo Expander Output R Bass Boost Indicator Stereo Expander Indicator Power Indicator Bass Boost Filter Terminal 1 Bass Boost Filter Terminal 3 Rch Output Lch Output V+ 52.5Ω V+/2 V+/2 0V or V+ 0V or V+ 0V or V+ V+/2 V+/2 V+/2 V+/2 –5– NJU7392 PIN NO. SYMBOL FUNCTION V+ 7 9 VOLINL VOLINR Volume Input L Volume Input R TERMINAL DC VOLTAGE EQUIVALENT CIRCUIT V+ V+ V+/2 V+/2 52.5Ω 50k Ω 50k Ω VREF V+ SELSW 52.5Ω Input Selector Setting 0V 100k Ω 10 V+ V+ PWSW UP DOWN TEST Power Switch Volume Up Switch Volume Down Switch Test Terminal –6– Stereo Expander Switch Bass Boost Switch 52.5Ω 200k Ω E X SW B B SW V+ 200k Ω V+ 12 13 0V 0V 0V 0V 52.5Ω 100k Ω 11 14 15 16 V+ V+ V+/2 V+/2 NJU7392 Ver.1.5_E NJU7392 PIN NO. SYMBOL FUNCTION 20 21 27 TREBLE SWMODE SENSE Treble Gain Setting Control Mode Setting Limiter Threshold Setting TERMINAL DC VOLTAGE EQUIVALENT CIRCUIT V+ V+ V+ V+ It depends on a test circuit. V+ 5k Ω 52.5Ω 52.5Ω 5k Ω V+ V+ VREF Reference Voltage 24 V+ Power Supply 200k Ω 23 NJU7392 Ver.1.5_E 1.2V V+ 20k Ω Reference Current 52.5Ω V+/2 20k Ω IREF 200k Ω 22 V+ –7– NJU7392 PIN NO. SYMBOL FUNCTION 25 GND Ground 0V V+ 26 INT V+ 1k Ω Limiter Recovery Time Setting V+ 29 BB2 Bass Boost Filter Terminal 2 TERMINAL DC VOLTAGE EQUIVALENT CIRCUIT 0V V+ 1k Ω V+/2 1k Ω 10pF VREF –8– NJU7392 Ver.1.5_E NJU7392 ■ PIN DESCRIPTION SWMODE (pin 21) PIN CONDITION 0Ω to 45kΩ FUNCTION PWSW (Pin 11) and EXSW (Pin 12) - both as Momentary SW mode. 55kΩ to 90kΩ PWSW (Pin 11) - Momentary SW mode, EXSW (Pin 12) - Alternative SW mode. 110kΩ to 135kΩ PWSW (Pin 11) - Alternative SW mode, EXSW (Pin 12) - Momentary SW mode. 165kΩ to OPEN PWSW (Pin 11) and EXSW (Pin 12) - both as Alternative SW mode. Momentary SW mode data format ●Momentary SW mode 1 High Mode Change [ ex. ON ] Mode Change [ ex. OFF ] Mode Change [ ex. ON ] Mode Change [ ex. OFF ] Mode Change [ ex. ON ] Mode Change [ ex. OFF ] Mode Change [ ex. ON ] Low or OPEN ●Momentary SW mode 2 High Mode Change [ ex. ON ] OPEN ●Momentary SW mode 3 OPEN Mode Change [ ex. ON ] Low Alternative SW mode data format ●Alternative SW mode 1 Mode Change [ ex. ON ] Mode Change [ ex. OFF ] Mode Change [ ex. ON ] Mode Change [ ex. OFF ] Mode Change [ ex. ON ] Mode Change [ ex. OFF ] Mode Change [ ex. ON ] High Low or OPEN ●Alternative SW mode 2 Mode Change [ ex. ON ] High OPEN ●Alternative SW mode 3 Mode Change [ ex. ON ] OPEN Low NJU7392 Ver.1.5_E –9– NJU7392 SELSW (pin 10) PIN CONDITION FUNCTION L(OPEN) Input 1 is selected. H Input 2 is selected. * The “Momentary SW mode” does not support. PWSW (pin 11) ●Momentary SW mode setting (* Momentary SW mode 1) PIN CONDITION FUNCTION OPEN(L)→H System status is changed to active mode and standby mode alternately. H→OPEN(L) No change. ●Alternative SW mode setting (* Alternative SW mode 1) PIN CONDITION H OPEN(L) FUNCTION Active mode Standby Mode. EXSW (pin 12) ●Momentary SW mode setting PIN CONDITION FUNCTION OPEN→H Stereo Expander setting is changed to ON and OFF alternately. (Palmtop Mode) (* Momentary SW mode 2) H→OPEN No change. (* Momentary SW mode 2) OPEN→L Stereo Expander setting is changed to ON and OFF alternately. (Laptop Mode) (* Momentary SW mode 3) L→OPEN No change. (* Momentary SW mode 3) ●Alternative SW mode setting PIN CONDITION FUNCTION H Stereo Expander setting is set to ON. (Palmtop Mode) (* Alternative SW mode 2) L Stereo Expander Setting is set to ON. (Laptop Mode) (* Alternative SW mode 3) OPEN Stereo Expander Setting is set to OFF. BBSW (pin 13) * As for the bass boost setting, a control data to 13pin arranges a control mode ("Momentary" or "Alternative") regardless of the condition on 21pin. ●Momentary SW mode setting (* Momentary SW mode 2) PIN CONDITION FUNCTION OPEN→H Bass Boost Setting is changed to ON and OFF alternately. H→OPEN No change. ●Alternative SW mode setting (* Alternative SW mode 3) PIN CONDITION FUNCTION OPEN→L Bass Boost Setting is set to ON. L→OPEN Bass Boost Setting is set to OFF. – 10 – NJU7392 Ver.1.5_E NJU7392 UP (pin 14) ●Momentary SW mode setting (* Momentary SW mode 1) PIN CONDITION FUNCTION OPEN(L)→H Volume setting is increased 1 step. Long push increase volume setting continuously. H→OPEN(L) No change. * The “Alternative SW mode” does not support. DOWN (pin 15) ●Momentary SW mode setting (* Momentary SW mode 1) PIN CONDITION FUNCTION OPEN(L)→H Volume setting is decreased 1 step. Long push decrease volume setting continuously. H→OPEN(L) No change. * The “Alternative SW mode” does not support. TEST (pin 16) PIN CONDITION FUNCTION L Normal operation mode H Test mode. Do not use for normal operation. TREBLE (pin 20) PIN CONDITION 0Ω to 45kΩ FUNCTION Frequency response is set to flat under Stereo Expander setting OFF condition. 55kΩ to 90kΩ Treble gain is set to +2dB under Stereo Expander setting OFF condition. 110kΩ to 135kΩ Treble gain is set to +3dB under Stereo Expander setting OFF condition. 165kΩ to OPEN Treble gain is set to +4dB under Stereo Expander setting OFF condition. NJU7392 Ver.1.5_E – 11 – NJU7392 ■ CONTROL DATA ●INITIAL CONDITION (POWER ON) FUNCTION TERMINAL CONDITION Stereo Expander pin 12 OFF Bass Boost pin 13 OFF Volume pin 14, pin15 -12dB ●Volume gain step setting Step No. Volume [dB] 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 MUTE -68 -64 -60 -56 -52 -48 -45 -42 -39 -36 -34 -32 -30 -28 -26 -24 -22 -20 -18 -16 -14 -12(7) -10 -8 -6 -5 -4 -3 -2 -1 0 (7) – 12 – Initial Setting NJU7392 Ver.1.5_E NJU7392 ■ TIMING CHART (Momentary SW mode) ●Standby release (Standby mode Æ Active mode) PWSW (pin11) High Low or OPEN PWIND (pin19) 20ms High Low 280ms Output (pin31, pin32) 40ms V+/2 0V ●Standby (Active mode Æ Standby mode) PWSW (pin11) High Low or OPEN 20ms High PWIND (pin19) Low 40ms Output (pin31, pin32) 280ms V+/2 0V NJU7392 Ver.1.5_E – 13 – NJU7392 ■ TIMING CHART (Momentary SW mode) ●Stereo Expander ON/OFF Palmtop mode High EXSW (pin12) V+/2 Low 20ms Laptop mode High EXIND (pin18) OFF Æ ON ON Æ OFF Low 40ms Output (pin31, pin32) 80ms 40ms V+/2 0V ●Bass Boost ON/OFF High BBSW (pin13) V+/2 0V 20ms OFF Æ ON High BBIND (pin17) ON Æ OFF Low 40ms 80ms 40ms Output + (pin31, pin32) V /2 0V – 14 – NJU7392 Ver.1.5_E NJU7392 ■ TIMING CHART (Alternative SW mode) ●Standby release (Standby mode Æ Active mode) PWSW (pin11) High Low or OPEN PWIND (pin19) 20ms High Low 280ms Output (pin31, pin32) 40ms V+/2 0V ●Standby (Active mode Æ Standby mode) PWSW (pin11) High Low or OPEN PWIND (pin19) 20ms High Low 40ms Output (pin31, pin32) 280ms V+/2 0V NJU7392 Ver.1.5_E – 15 – NJU7392 ■ TIMING CHART (Alternative SW mode) ●Stereo Expander ON/OFF Palmtop mode High EXSW (pin12) V+/2 Low 20ms Laptop mode High EXIND (pin18) OFF Æ ON ON Æ OFF Low 40ms Output (pin31, pin32) 80ms 40ms V+/2 0V ●Bass Boost ON/OFF High BBSW (pin13) V+/2 0V 20ms OFF Æ ON High BBIND (pin17) ON Æ OFF Low 40ms 80ms 40ms Output + (pin31, pin32) V /2 0V – 16 – NJU7392 Ver.1.5_E NJU7392 ■ TIMING CHART (Alternative SW mode) ●Input Selector Input 1 Æ Input 2 High SELSW (pin10) Low or OPEN Input 2 Æ Input 1 20ms 40ms 80ms 40ms Output + (pin31, pin32) V /2 0V NJU7392 Ver.1.5_E – 17 – NJU7392 ■ TIMING CHART (Volume UP/DOWN control) 1. Recognition condition of Volume UP/DOWN push button I/F 1-a.) The Volume UP/(DOWN) recognizes the data-command to the case that the DOWN(UP) button has not been pushed, besides that the UP(DOWN) button is pushed for the longer time than the “Pulse Distinction Time: 20ms". 1-b.) The Volume UP/(DOWN) recognizes the data-command to the case that the UP(DOWN) button has pushed earlier than the DOWN(UP) button, besides the UP(DOWN) button is pushed for the longer time than the “Pulse Distinction Time: 20ms". > Pulse Distinction Time (20ms typ.) Recognition > Pulse Distinction Time (20ms typ.) Recognition UP UP DOWN DOWN 1-a 1-b 2. Invalidity condition of Volume UP/DOWN push button I/F 2-a.) The Volume UP/(DOWN) does NOT recognize the data-command to the case that the UP(DOWN) button has pushed for the shorter time than the “Pulse Distinction Time: 20ms". (The Chattering prevention function operates.) 2-b.) The Volume UP/(DOWN) does NOT recognize the data-command to the case that the UP(DOWN) button has pushed for the shorter time than the “Pulse Distinction Time: 20ms" after released button. (The Chattering prevention function operates.) 2-c.) The Volume UP/(DOWN) does NOT recognize the data-command to the case that the UP(DOWN) button has pushed before releasing DOWN(UP) button. < Pulse Distinction Time (20ms typ.) < Pulse Distinction Time (20ms typ.) UP UP UP DOWN DOWN DOWN 2-a – 18 – 2-b 2-c NJU7392 Ver.1.5_E NJU7392 ■ TIMING CHART (Volume UP/DOWN control) 3. Start condition of Volume UP/DOWN Auto increment function 3-a.) The Auto increment of volume UP(DOWN) is started to the case that the DOWN(UP) button has not been pushed, besides that the UP(DOWN) button is pushed for the longer time than the “Auto increment Distinction Time: 1s". > Auto increment Distinction Time (1s typ.) Auto increment starts UP DOWN 3-a 4. Stop condition of Volume UP/DOWN Auto increment function 4-a.) The Auto increment of volume UP(DOWN) is stopped to the case that the UP(DOWN) button has released for the longer time than the “Pulse Distinction Time: 20ms" for the Auto increment period. 4-b.) The Auto increment of volume UP(DOWN) is stopped to the case that the DOWN(UP) button has pushed for the Auto increment period. Auto increment Distinction Time (1s typ.) Increment start UP DOWN (20ms typ.) Auto increment Distinction Time Increment start (1s typ.) UP Increment stop 4-a NJU7392 Ver.1.5_E Pulse Distinction Time DOWN Increment stop 4-b – 19 – NJU7392 ■ APPLICATION CIRCUIT Output R Output L V+ V+ V+ 0.47µF V+ TREBLE PWIND EXIND BBIND UP DOWN TEST 17 BBSW 18 SWMODE 19 EXSW 20 IREF SENSE 21 PWSW BB1 22 SELSW BB2 23 VOLINL BB3 24 EXOUTR OUTR 25 VOLINL OUTL 26 EXOUTL 27 IN2R 28 IN2L 29 120k Ω IN1R 30 100k Ω IN1G 31 1µF IN1L 32 1µF 1µF VREF 120k Ω 0.01µF V+ 15k Ω GND 47k Ω INT 15k Ω 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 NJU7392 Input 2R Input 2L 0.47µF 0.47µF 0.47µF Input 1R Input 1G Input 1L 0.47µF 1µF 4.7µF 9.1k Ω 10k Ω 0.47µF 4.7µF 9.1k Ω 0.47µF V+ V+ V+ V+ V+ V+ 10k Ω [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. – 20 – NJU7392 Ver.1.5_E