DC-DC CONVERTERS PBIH Series 1 5 - 4 5 W AT T S D C / D C D U A L & T R I P L E O U T P U T Features • • • • • • • Small size Dual/triple outputs Wide DC input voltage High efficiency Low output ripple/noise EMI filter Overvoltage protection SPECIFICATIONS INPUT Input voltage ENVIRONMENTAL 12VDC (9.2–16), 24VDC (19–32), 48VDC (38–63), 110VDC (85–140) OUTPUT Operating temperature 0°C to 50°C Full load Derating 50°C to 60°C Half load Storage temperature -20°C to +85°C Humidity 85% Cooling Free air convection Output voltage See table Voltage adjustment ±5% (V1 & V2 on dual) (V1 on triple except PBIH## xxF) Output current See table Shock 30G Ripple & noise Output Volts x 1% + 50mV pk-pk Vibration (5Hz–10Hz 10mm), (5Hz–50Hz) 2G Line regulation 0.8% over input range Load regulation 1%, 0%–100% load Holdup time 6–10mS depending on model Temperature coefficient 0.03% per °C Drift Output V x 0.5% + 15mV per 8 hrs after 1 hr Fold back current limiting, except PBIH# TxF triple O.V. clamp. OVP is done with SCR. Input must be switched off for at least 30S to reactivate Overcurrent protection Overvoltage protection MECHANICAL Dimensions / Weight PBIH# xxF: 118x80x25mm / 250g PBIH# xxG: 135x85x31mm / 380g PBIH# xxJ: 160x96x33mm / 470g Connection Screw terminal strip STANDARDS AND APPROVALS C-tick AS/NZSCISPR11, Group 1, Class A OPERATING 108 Efficiency 70%–84%, PBIH# TxF triple 62% Safety isolation Type – 12, 24, 48V input (1 minute) Input – Output: 1500VAC Input – Case: 1500VAC Output – Case: 500VAC Type – 110V input Input – Output: 2000VAC Input – Case: 2000VAC Output – Case: 500VAC Insulation resistance 50Mž Input – Case Parallel operation No DOC. NO. PBC9 REV.C 28-4-11 PBIH Series SELECTION TABLE DUAL OUTPUT OUTPUT VOLTAGE MODEL NUMBER 5V PBIH# D1F 12V 15V 24V -12V 0.75A PBIH# D2F 0.8A PBIH# D3G 2.8A* 0.45A* PBIH# D3BG 1A* 0.9A* 25W 25W 0.9A* 1A* PBIH# D5G 2.8A* 0.9A* PBIH# D5BG 1.2A* 1.6A* 15W 15W 1.2A* PBIH# D2G OUTPUT POWER 15W 0.5A 0.8A PBIH# D1G -15V 0.5A 0.5A PBIH# D6F PBIH# D3J -5V 25W 0.7A* 25W 25W 25W 5A* 0.85A 45W (0.75A)* PBIH# D3BJ 1.5A 1.5A* 45W DC-DC CONVERTERS 1 5 - 4 5 W AT T S D C / D C D U A L T R I P L E O U T P U T (1.4A)* PBIH# D1J 2A* PBIH# D1BJ 3A* 1.7A 45W (1.5A)* 0.8A 45W (0.6A)* PBIH# D2J 1.7A 1.3A* 45W (1.5A)* PBIH# D5J 5A* 1.7A 45W (1.5A)* PBIH# D5BJ 1.5A 3A* 45W (1.4A)* SELECTION TABLE TRIPLE OUTPUT OUTPUT VOLTAGE MODEL NUMBER 12V PBIH# T1F 1.8A 0.15A PBIH# T3F 1.8A 0.15A PBIH# T2F 1.8A PBIH# T1G 2.8A* 0.5A 0.4A 25W PBIH# T1BG 0.7A 1.5A* 0.25A 25W PBIH# T3G 2.8A* 0.5A PBIH# T2G 2.8A* PBIH# T1J 5A PBIH# T1BJ PBIH# T3J PBIH# T2J 1A 5A 5A 15V -5V -12V -15V OUTPUT POWER 5V 0.15A 12.5W 0.15A 12.5W 0.12A 0.12A 0.5A 25W 0.36A 0.36A 0.83A 0.83A (0.73A) (0.73A) 3A 0.4A (2.7A) (0.3A) 0.83A 0.83A (0.73A) (0.73A) 12.5W 25W 45W 45W 45W 0.65A 0.65A (0.6A) (0.6A) 45W NOTE: Input codes# = C12(12V), C24(24V), C48V), D(110V) To obtain model number substitute # for input code. * Galvanically isolated output ( ) Output current rating for 12V input units Doc. No. PBC9 Rev.C 28-4-11 Powering Progress – www.powerbox.com.au 109 DC-DC CONVERTERS PBIH Series 1 5 - 4 5 W AT T S D C / D C D U A L T R I P L E O U T P U T PBIH-F (15W) PBIH-G (25W) PBIH-J (45W) 110 DOC. NO. PBC9 REV.C 28-4-11