OPEN FRAME & ENCLOSED PM80 6 0 - 8 0 W AT T S D C / D C S I N G L E - D U A L Features • • • • • • • Very wide input voltage range Reverse input voltage protection Din rail mounting High efficiency EMI/RFI EN55022-B Low ripple output Operating temperature -25 to +55OC Specifications MECHANICAL SPECIFICATIONS INPUT Input voltage 12V, 24V, 36V, 48V, 110V, 220V See table for details Reverse polarity protection Yes 157x106x48mm Weight 0.65kg OUTPUT SPECIFICATIONS Selection Table Output voltage See table OUTPUT1 60V ±10%; 24V ±10%; 15V, 12-16V MODEL NUMBER INPUT Voltage adjustment Output current See table PM80 24/24-24 18-32V 24V 2.50A 60W PM80 24/36-36 18-32V 36V 1.68A 60W Ripple & noise <2mV rms PM80 24/24-24 18-32V 48V 1.25A 60W Load regulation 0.2% PM80 24/36-36 18-32V 72V 0.84A 60W Line regulation 0.2% PM80 48/24-24 40-60V 24V 3.34A 80W PM80 48/36-36 40-60V 36V 2.24A 80W PM80 48/24-24 40-60V 48V 1.67A 80W PM80 48/36-36 40-60V 72V 1.12A 80W PM80 110/24-24 88-150V 24V 3.34A 80W PM80 110/36-36 88-150V 36V 2.24A 80W 78%–85% PM80 110/24-24 88-150V 48V 1.67A 80W 45kHz PM80 110/36-36 88-150V 72V 1.12A 80W PM80 220/24-24 175-300V 24V 3.34A 80W PM80 220/36-36 175-300V 36V 2.24A 80W PM80 220/24-24 175-300V 48V 1.67A 80W PM80 220/36-36 175-300V 72V 1.12A PM80 24/24-24 18-32V 24V 1.25A 24V 1.25A 80W PM80 24/36-36 18-32V 36V 0.84A 36V 0.84A 80W PM80 48/24-24 40-60V 24V 1.67A 24V 1.67A 80W PM80 48/36-36 40-60V 36V 1.12A 36V 1.12A 80W -25°C to 55°C 100% Load PM80 110/24-24 88-150V 24V 1.67A 24V 1.67A 80W Storage temperature -40°C to 85°C PM80 110/36-36 88-150V 36V 1.12A 36V 1.12A 80W Can be used in non-condensing tropic Yes PM80 220/24-24 175-300V 24V 1.67A 24V 1.67A 80W PM80 220/36-36 175-300V 36V 1.12A 36V 1.12A 80W Temperature coefficient 0.02% per °C Overcurrent protection Yes Transient response 3mS typical, 10%–90% load step OPERATING Efficiency Switching frequency Safety isolation For 24V, 48V inputs and below: Input – Output: 2000VDC Input - Case: 2000VDC Output – Case: 1000VDC For 60V input and above: Input – Output: 2500VAC Input - Case:2500VDC Output – Case: 1000VDC ENVIRONMENTAL Operating temperature STANDARDS AND APPROVALS 130 Dimensions Safety standards IEC60950, EN/IEC61204-3 C-Tick AS/NZS CISPR11 Group 1, Class A EMC standards EN/IEC61000-4-4, 4KV EN/IEC61000-4-5 Level 2 and 3 EMI standards EN55011/EN55022 Level B OUTPUT2 POWER 80W Models conists of 2 isolated outputs 24V and 36V for connection in series or parallel. Note: For dual output models, please consult Powerbox for model number and details.