PO54G04A, PO74G04A www.potatosemi.com HEX INVERTER 54, 74 Series Noise Cancellation GHz Logic FEATURES: DESCRIPTION: . Patented technology . Specified From –40°C to 85°C, –40°C to 125°C, and –55°C to 125°C . Operating frequency up to 1.125GHz with 2pf load . Operating frequency up to 700MHz with 5pf load . Operating frequency up to 270MHz with 15pf load . VCC Operates from 1.65V to 3.6V . Propagation delay < 1.4ns max with 15pf load Potato Semiconductor’s PO74G04A is designed for . Low input capacitance: 4pf typical . Latch-Up Performance Exceeds 250 mA Per JESD 17 . ESD Protection Exceeds JESD 22 . 5000-VHuman-BodyModel (A114-A) . 200-VMachineModel (A115-A) . Available in 14pin 150mil wide SOIC package . Available in 14pin Ceramic Dual Flatpack . Available in 20pin Leadless Ceramic Chip Carrier This feature allows the use of these devices as world top performance using submicron CMOS technology to achieve 1.125GHz TTL /CMOS output frequency with less than 1.4ns propagation delay. This hex inverter contains six independent inverters designed for 1.65-V to 3.6-V VCC operation. The PO74G04A performs the Boolean function Y= A. Inputs can be driven from either 3.3V or 5V devices. translators in a mixed 3.3V/5V system environment. 1A 1 14 1Y 2 13 2A 3 12 6Y 2Y 4 11 5A 3A 5 10 5Y 3Y 6 9 4A GND 7 8 4Y V CC 6A 4 5 6 7 8 3 2 1 20 19 18 17 16 15 14 9 10 11 12 13 6Y NC 5A NC 5Y 3Y GND NC 4Y 4A 2A NC 2Y NC 3A Logic Block Diagram Pin Description INPUT A OUTPUT Y H L L H Potato Semiconductor Corporation 1Y 1A NC VCC 6A Pin Configuration A 1 Y 01/01/10 PO54G04A, PO74G04A www.potatosemi.com HEX INVERTER 54, 74 Series Noise Cancellation GHz Logic Maximum Ratings Description Max Unit Storage Temperature -65 to 150 °C Operation Temperature -55 to 125 °C Operation Voltage -0.5 to +4.6 V Input Voltage -0.5 to +5.5 V Output Voltage -0.5 to Vcc+0.5 V Note: stresses greater than listed under Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability specification is not implied. DC Electrical Characteristics Symbol Description VOH Output High voltage VOL Test Conditions Min Typ Max Unit Vcc=3V Vin=VIH or VIL, IOH= -12mA 2.4 3 - V Output Low voltage Vcc=3V Vin=VIH or VIL, IOH=12mA - 0.3 0.5 V VIH Input High voltage Guaranteed Logic HIGH Level (Input Pin) 2 - 5.5 V VIL Input Low voltage Guaranteed Logic LOW Level (Input Pin) -0.5 - 0.8 V IIH Input High current Vcc = 3.6V and Vin = 5.5V - - 5 uA IIL Input Low current Vcc = 3.6V and Vin = 0V - - -5 uA VIK Clamp diode voltage Vcc = Min. And IIN = -18mA - -0.7 -1.2 V Notes: 1. 2. 3. 4. 5. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. Typical values are at Vcc = 3.3V, 25 °C ambient. This parameter is guaranteed but not tested. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. VoH = Vcc – 0.6V at rated current Potato Semiconductor Corporation 2 01/01/10 PO54G04A, PO74G04A www.potatosemi.com HEX INVERTER 54, 74 Series Noise Cancellation GHz Logic Power Supply Characteristics Symbol IccQ Description Quiescent Power Supply Current Test Conditions (1) Min Typ Max Unit Vcc=Max, Vin=Vcc or GND - 0.1 40 uA Notes: 1. 2. 3. 4. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. Typical values are at Vcc = 3.3V, 25°C ambient. This parameter is guaranteed but not tested. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. Capacitance Parameters (1) Description Cin Cout Test Conditions Typ Unit Input Capacitance Vin = 0V 4 pF Output Capacitance Vout = 0V 6 pF Test Conditions (1) M ax Unit Notes: 1 This parameter is determined by device characterization but not production tested. Switching Characteristics Symbol Description tPLH Propagation Delay A, B to Y CL = 15pF 1.4 ns tPHL Propagation Delay A, B to Y CL = 15pF 1.4 ns tr/tf Rise/Fall Time 0.8V – 2.0V 0.8 ns fmax Input Frequency CL =15pF 270 MHz fmax Input Frequency CL = 5pF 700 MHz fmax Input Frequency CL = 2pF 1125 MHz Notes: 1. See test circuits and waveforms. 2. tpLH, tpHL, tsk(p), and tsk(o) are production tested. All other parameters guaranteed but not production tested. 3. Airflow of 1m/s is recommended for frequencies above 133MHz Potato Semiconductor Corporation 3 01/01/10 PO54G04A, PO74G04A www.potatosemi.com HEX INVERTER 54, 74 Series Noise Cancellation GHz Logic Test Waveforms Propagation Delay 3V 1.5V Input 0V tPHL tPLH VoH 2.0V 1.5V 0.8V VoL Output tf tR Test Circuit Vcc Pulse Generator 50Ohm Potato Semiconductor Corporation D.U.T. 15pF to 2pF 4 01/01/10 PO54G04A, PO74G04A www.potatosemi.com HEX INVERTER 54, 74 Series Noise Cancellation GHz Logic Packaging Mechanical Drawing: 14 pin 150mil SOIC 0.244 6.20 0.228 5.80 0.010 0.007 0.050 1.27 0.016 0.40 0.25 0.17 X.XX Denotes dimensions in inches X.XX X.XX Denotes dimensions in millimenters X.XX Packaging Mechanical Drawing: 14pin Leadless Ceramic Chip Carrier X.XX Denotes dimensions in inches X.XX X.XX Denotes dimensions in millimenters X.XX Potato Semiconductor Corporation 5 01/01/10 PO54G04A, PO74G04A www.potatosemi.com HEX INVERTER 54, 74 Series Noise Cancellation GHz Logic Packaging Mechanical Drawing: 20pin Ceramic Dual Flatpack 0.080 (2,03) 0.064 (1,63) 0.020 (0,51) 0.010 (0,25) 0.020 (0,51) 0.010 (0,25) 0.055 (1,40) 0.045 (1,14) 0.045 (1,14) 0.035 (0,89) 0.045 (1,14) 0.035 (0,89) 0.028 (0,71) 0.022 (0,54) 0.050 (1,27) 3 0.358 (9,09) 0.342 (8,69) 2 1 13 12 4 18 5 17 6 16 0.358 (9,09) 7 0.307 (7,80) 15 8 14 9 10 11 12 X.XX Denotes dimensions in inches X.XX 13 X.XX Denotes dimensions in millimenters X.XX IC Ordering Information Ordering Code Package Top-Marking TA PO74G04ASU for Tube 14pin SOIC Pb-free & Green POTATO74G04AS -40 C to 125 C PO74G04ASR for Tape & Reel 14pin SOIC Pb-free & Green POTATO74G04AS -40 C to 125 C PO54G04ALU for Tube 14pin Leadless Ceramic Chip Carrier Pb-free & Green POTATO54G04AL -55 C to 125 C PO54G04AFU for Tube 20pin Ceramic Dual Flatpack Pb-free & Green POTATO54G04AF -55 C to 125 C IC Package Information PACKAGE CODE S PACKAGE TYPE TAPE WIDTH (mm) TAPE PITCH (mm) PIN 1 LOCATION TAPE TRAILER LENGTH QTY PER REEL TAPE LEADER LENGTH QTY PER TUBE SOIC 14 16 8 Top Left Corner 39 (12”) 3000 64 (20”) 55 N/A N/A N/A N/A 55 N/A N/A N/A N/A 150 L LCCC 20 N/A N/A F CFP 14 N/A N/A Potato Semiconductor Corporation 1 01/01/10