Product data sheet - Power

Product data sheet
PS-LEDP35-C
LED Power Supply | LED Driver | LED Control Gear | 35 Watt (200 ~ 700mA / 24 ~ 48Vdc ) | CC
•
•
Suitable for indoor applications
Type of Protection: II and SELV output
Product benefits
•
•
•
•
High efficiency: > 91 %
Very compact casing: 105 x 75 x 28 mm (L x W x H)
Patented and labelled plugs for adjustmens of precise output current
6 to 12 Vdc / 100mA adjustable Fan voltage
Product features
•
•
•
•
•
•
Constant Current CC
Output power max.: 35 Watt
Output current range : 200 ~ 700 mA
Output voltage range : 24 ~ 48 Vdc
Simple and easily assembled poke-in connectors
Analog current dimming, no PWM dimming
Dimming function
•
•
Manual dimming function with simple push button without control board
ON / OFF function with the same push button < 1 sec. (optional)
Power Systems GmbH &Co KG
Tel.: +49 7062 6759 6
www.power-systems.de
Page (1)
(Preliminary datasheet)
All rights reserved.
Version 3.0.1, 23rd May 2014
Product data sheet
PS-LEDP35-C
LED Power Supply | LED Driver | LED Control Gear | 35 Watt (200 ~ 700mA / 24 ~ 48Vdc ) | CC
Technical data
Electrical Data
Nominal voltage
220 ~ 240 Vac
Input voltage range
207 ~ 253 Vac 1
Nominal current
0,3 Arms ²
Power frequency
50 ~ 60 Hz
Output voltage range
24 ~ 48 Vdc 3
Output current range
200~ 700 mA (selectable by current plugs) 4
Output power
35 W 5
Device power loss
3,2 W 6
Efficiency
>91 % 7
Inrush current
>10 A 8
Power factor λ
>0,9 9
Device power loss in Stand-By
<1 W
Galvanic isolation primary / secondary
3750 Vac 10
Start delay
<1 sec
Switching off delay
10 msec
Fan output
12 Vdc 11
Ripple voltage
<1,2 Vss
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Permitted voltage range
At 230 Vac
Max. 48 Vdc
<± 10% (200 ~ 700 mA)
Partial Load 4 ~ 35 W / non dimming
Max.
Full load at 230 Vac
Twidth = 260 µs (measured at 50 % Ipeak) measured 6 A
Full load at 230 Vac
SELV equivalent
Max. 100 mArms. Adjustable 6-12 Vdc with resistor
Dimensions and weight
Lenght
105,0 mm
Width
75,0 mm
Height
28,0 mm
Product weight
165 g
Cable cross-section, input side
0,2 ~ 1,5 mm² / 24 ~ 16 AWG
Cable cross-section, output side
0,2 ~ 1,5 mm² / 24 ~ 16 AWG
Power Systems GmbH &Co KG
Tel.: +49 7062 6759 6
www.power-systems.de
Page (2)
(Preliminary datasheet)
All rights reserved.
Version 3.0.1, 23rd May 2014
Product data sheet
PS-LEDP35-C
LED Power Supply | LED Driver | LED Control Gear | 35 Watt (200 ~ 700mA / 24 ~ 48Vdc ) | CC
Technical data
Product drawing
3.1
28.0
75.0
3.1
105.0
3.1
.0
Ø4
3.1
Temperatures
Operating ambient temperature range
-20°C ~ +50°C
Storage temperature range
-20°C ~ +80°C
Max. temperature at tc test point
85°C
Operating humidity rage
5% to 80%
Storage humidity rage
5% to 90%
Capabilities
Max. wiring lenght driver / lamp
10 m
Overcurrent protection
Automatic reversible
Overvoltage protection
Automatic reversible
Short-circuit protection
Automatic reversible
Suitable for fixture with protection class
I / II
Power Systems GmbH &Co KG
Tel.: +49 7062 6759 6
www.power-systems.de
Page (3)
(Preliminary datasheet)
All rights reserved.
Version 3.0.1, 23rd May 2014
Product data sheet
PS-LEDP35-C
LED Power Supply | LED Driver | LED Control Gear | 35 Watt (200 ~ 700mA / 24 ~ 48Vdc ) | CC
Technical data
Certificates and standards
CE
EN61347-1; EN61347-2-13
EMI
EN55015 Class B
EMS
EN61000-3-2; EN6100-3-3; EN61547
Type of protection
IP30
Reliability:
MTBF
Drop test
Vibration test
Power Systems GmbH &Co KG
Tel.: +49 7062 6759 6
www.power-systems.de
50.000 hour @ 25ºC. 100% Burn-In-Test
80~100% load & 35~45ºC operating temp.
MIL HDBK-217F
Test height 76cm, after drop test no changings of
the electrical characteristics.
During seafreight should the vibration should be
not above 1.5G peak, 5~500Hz.
Operation vibration should be not above as 0.75G
peak, 5~500Hz, 3 planes. After the test no
changings of the electrical characteristics.
Page (4)
(Preliminary datasheet)
All rights reserved.
Version 3.0.1, 23rd May 2014
Product data sheet
PS-LEDP35-C
LED Power Supply | LED Driver | LED Control Gear | 35 Watt (200 ~ 700mA / 24 ~ 48Vdc ) | CC
Technical data
Connector CN1 250-405 WAGO
CN1-1
L (220 ~ 240 Vac)
CN1-2
N.C.
CN1-3
N (220 ~ 240 Vac)
CN1-4
N.C.
CN1-5
N.C.
Connector CN2 250-404 WAGO
CN2-1
LED+ (48 Vdc)
CN2-2
LED+ (48 Vdc)
CN2-3
LED-
CN2-4
LED-
Connector CN3 53398-0371 Molex
CN3-1
NTC 1+2
CN3-2
NTC
CN3-3
Fan Control (R+) 3
CN3-4
Fan Control (R-)
CN3-5
Slow start setting 4
CN3-6
Fan+ (12 Vdc)
CN3-7
GND for Fan
1.
2.
3.
4.
Slope adjustable
Available August 2013
Fan voltage/speed CN3-3 /CN3-4 adjustable via ext. resistor value
Output current rise time is adjustable in a range of 0 ~ 3 sec (optional)
Power Systems GmbH &Co KG
Tel.: +49 7062 6759 6
www.power-systems.de
Page (5)
(Preliminary datasheet)
All rights reserved.
Version 3.0.1, 23rd May 2014
Product data sheet
PS-LEDP35-C
LED Power Supply | LED Driver | LED Control Gear | 35 Watt (200 ~ 700mA / 24 ~ 48Vdc ) | CC
Technical data
Diagram shows the correspondence between
resistor value setting and fan voltage/speed:
Diagram shows the different output current
patterns of increase based on switch on time
(with/without slow start).
Switch on time with/without slow start is
determined by resistor value settings
Power Systems GmbH &Co KG
Tel.: +49 7062 6759 6
www.power-systems.de
Page (6)
(Preliminary datasheet)
All rights reserved.
Version 3.0.1, 23rd May 2014
Product data sheet
PS-LEDP35-C
LED Power Supply | LED Driver | LED Control Gear | 35 Watt (200 ~ 700mA / 24 ~ 48Vdc ) | CC
Wiring diagram
Connector CN3 - Settings
NTC SET (R1) Ω
NTC SET (Temp) °C
2.5K
TBD
6.7K
TBD
15K
TBD
40K
TBD
FAN SET (R2) Ω
Fan SET (Volt) Vdc
Open
12
87.56K
10
27.59K
8
8.45K
6
Soft Start (R3) Ω
Soft Start (Time) sec
Open
0
0K
3
87K
2
230K
1
Power Systems GmbH &Co KG
Tel.: +49 7062 6759 6
www.power-systems.de
Page (7)
(Preliminary datasheet)
All rights reserved.
Version 3.0.1, 23rd May 2014
Product data sheet
PS-LEDP35-C
LED Power Supply | LED Driver | LED Control Gear | 35 Watt (200 ~ 700mA / 24 ~ 48Vdc ) | CC
Delivered Accessories
• PS-LEDP-Plug 0350
• PS-LEDP-Plug 0550
• PS-LEDP-Plug 0700
a 1 pcs
a 1 pcs
a 1 pcs
Accessories
• Model: PS-LEDengine 1
• http://www.power-systems.de/en/product-details/?product=1170
• Model: PS-LEDengine 2
• http://www.power-systems.de/en/product-details/?product=1223
• Model: PS-LEDLuminaire
• http://www.power-systems.de/en/products/led-lighting/led-luminaire/
• Model: PS-LED-Plug
• Other Plugs continuously variable between 200 and 700 mA
Power Systems GmbH &Co KG
Tel.: +49 7062 6759 6
www.power-systems.de
Page (8)
(Preliminary datasheet)
All rights reserved.
Version 3.0.1, 23rd May 2014
Product data sheet
PS-LEDP35-C
LED Power Supply | LED Driver | LED Control Gear | 35 Watt (200 ~ 700mA / 24 ~ 48Vdc ) | CC
Disclaimer
Subject to change without prior notice. Please ensure that you have the most recent release.
Please find our terms and conditions here: AGB.
Contact details
Power Systems GmbH & Co.KG
Hauptstr. 48
74360 Ilsfeld-Auenstein / Germany
Tel.: +49 7062 6759 - 6
Fax: +49 7062 6759 - 800
Email: [email protected]
Web: www.Power-Systems.de
Commercial register
Amtsgericht Stuttgart HRA 104529
Partner liable to unlimited extent
Power Systems Verwaltungs GmbH, Ilsfeld
General manager
Mrs. Andrea Luithle
General manager
Mr. Holger Dziadek
VAT Registration Number (VAT REG NO)
DE 234167965
Tax number
65216 / 35600
DIN EN ISO 9001-2008 Regist. No.
454707 QM08, DQS
Power Systems GmbH &Co KG
Tel.: +49 7062 6759 6
www.power-systems.de
Page (9)
(Preliminary datasheet)
All rights reserved.
Version 3.0.1, 23rd May 2014