Product data sheet PS-LEDP85-DALI-C-1 LED Power Supply | LED Driver | LED Control Gear | DALI | 85 Watt (30 ~ 420mA / 150 ~ 200Vdc ) | CC • • • Suitable for indoor applications Type of protection: II DALI Product benefits • • • • High efficiency: > 91 % Very compact casing: 125 x 85 x 35 mm (L x W x H) Patented and labelled plugs for adjustments of precise output current 6 to 12 Vdc / 100mA adjustable Fan voltage Product features • • • • • • Constant Current CC Output power max.: 85 Watt Output current range: 30 ~ 420 mA Output voltage range: 150 ~ 200 Vdc Simple and easily assembled poke-in connectors Analog current dimming, no PWM dimming Dimming function • • Dimmable via DALI, or manual dimming function with simple push button with USB-Dongle 2 ON / OFF function with the same push button < 1 sec. (optional) Power Systems GmbH &Co KG Tel.: +49 7062 6759 6 www.power-systems.de Page (1) (Preliminary datasheet) All rights reserved. Version 1.1.1, 23rd May 2014 Product data sheet PS-LEDP85-DALI-C-1 LED Power Supply | LED Driver | LED Control Gear | DALI | 85 Watt (30 ~ 420mA / 150 ~ 200Vdc ) | CC Technical data Electrical Data Nominal voltage 100 ~ 240 Vac Input voltage range 90 ~ 264 Vac 1 Nominal current <2,0 Arms ² Power frequency 50 ~ 60 Hz Output voltage range 150 ~ 200 Vdc 3 Output current range 30 ~ 420 mA (einstellbar über Stecker-Satz) 4 Output power 85 W 5 Device power loss 7,6 W 6 Efficiency >91 % 7 Inrush current <100 A 8 Power factor λ >0,9 9 Device power loss in Stand-By <1 W Galvanic isolation primary / secondary 3750 Vac Start delay <1 sec Switching off delay 10 msec Fan output 12 Vdc 10 Ripple voltage <1,0 Vss 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Permitted voltage range At 230 Vac Max. 200 Vdc <± 10% (30 ~ 420 mA) Partial Load 3 ~ 85 W / non dimming Max. Full load at 230 Vac Twidth = 260 µs (measured at 50 % Ipeak), measured 80 A Full load at 230 Vac Max. 100 mArms. Adjustable 6-12 Vdc with resistor Dimensions and weight Lenght 125,0 mm Width 85,0 mm Height 35,0 mm Product weight 265 g Cable cross-section, input side 0,2 ~ 1,5 mm² / 24 ~ 16 AWG Cable cross-section, output side 0,2 ~ 1,5 mm² / 24 ~ 16 AWG Power Systems GmbH &Co KG Tel.: +49 7062 6759 6 www.power-systems.de Page (2) (Preliminary datasheet) All rights reserved. Version 1.1.1, 23rd May 2014 Product data sheet PS-LEDP85-DALI-C-1 LED Power Supply | LED Driver | LED Control Gear | DALI | 85 Watt (30 ~ 420mA / 150 ~ 200Vdc ) | CC Technical data Product drawing 3.0 35.0 125.0 3.1 D ia : 4. 0 85.0 3.1 9.95 3.0 Temperatures Operating ambient temperature range -20°C ~ +60°C Storage temperature range -20°C ~ +80°C Max. temperature at tc test point 85°C Operating humidity rage 5% to 80% Storage humidity rage 5% to 90% Capabilities Dimming interface DALI Dimming range 3 ~ 100 % Max. wiring lenght driver / lamp 10 m Dimmable Yes Overcurrent protection Automatic reversible Overvoltage protection Automatic reversible Short-circuit protection Automatic reversible Suitable for fixture with protection class I / II Power Systems GmbH &Co KG Tel.: +49 7062 6759 6 www.power-systems.de Page (3) (Preliminary datasheet) All rights reserved. Version 1.1.1, 23rd May 2014 Product data sheet PS-LEDP85-DALI-C-1 LED Power Supply | LED Driver | LED Control Gear | DALI | 85 Watt (30 ~ 420mA / 150 ~ 200Vdc ) | CC Technical data Certificates and standards CE EN61347-1; EN61347-2-13 EMI EN55015 Class B EMS EN61000-3-2; EN6100-3-3; EN61547 DALI EN60929; EN62386 Type of protection IP50 Reliability: MTBF Drop test Vibration test Power Systems GmbH &Co KG Tel.: +49 7062 6759 6 www.power-systems.de 50.000 hour @ 25ºC. 100% Burn-In-Test 80~100% load & 35~45ºC operating temp. MIL HDBK-217F Test height 76cm, after drop test no changings of the electrical characteristics. During seafreight should the vibration should be not above 1.5G peak, 5~500Hz. Operation vibration should be not above as 0.75G peak, 5~500Hz, 3 planes. After the test no changings of the electrical characteristics. Page (4) (Preliminary datasheet) All rights reserved. Version 1.1.1, 23rd May 2014 Product data sheet PS-LEDP85-DALI-C-1 LED Power Supply | LED Driver | LED Control Gear | DALI | 85 Watt (30 ~ 420mA / 150 ~ 200Vdc ) | CC Technical data Connector CN1 250-405 WAGO CN1-1 L (100 ~ 240 Vac) CN1-2 N.C. CN1-3 N (100 ~ 240 Vac) CN1-4 DALI 1+2 CN1-5 DALI Connector CN2 250-404 WAGO CN2-1 LED+ (150 ~ 200 Vdc) CN2-2 LED+ (150 ~ 200 Vdc) CN2-3 LED- CN2-4 LED- Connector CN3 53398-0371 Molex CN3-1 NTC SET3+4 CN3-2 NTC CN3-3 Fan Set 5 CN3-4 Signal GND CN3-5 Soft start 6 CN3-6 FAN + CN3-7 FAN - 1. 2. 3. 4. 5. 6. DALI function: DALI dimming / DALI ON/OFF / DALI LED failure according to DALI-Norm Attention: In case of incorrect DALI wire connection (>40 V), the LED driver will be permanently damaged Slope adjustable Available August 2013 Fan voltage/speed CN3-3 /CN3-4 adjustable via ext. resistor value Output current rise time is adjustable in a range of 0 ~ 3 sec (optional) Power Systems GmbH &Co KG Tel.: +49 7062 6759 6 www.power-systems.de Page (5) (Preliminary datasheet) All rights reserved. Version 1.1.1, 23rd May 2014 Product data sheet PS-LEDP85-DALI-C-1 LED Power Supply | LED Driver | LED Control Gear | DALI | 85 Watt (30 ~ 420mA / 150 ~ 200Vdc ) | CC Technical data Diagram showing the correspondence between resistor value setting and fan voltage/speed: Diagram showing the different output current patterns of increase based on switch on time (with/without slow start). Switch on time with/without slow start is determined by resistor value settings Power Systems GmbH &Co KG Tel.: +49 7062 6759 6 www.power-systems.de Page (6) (Preliminary datasheet) All rights reserved. Version 1.1.1, 23rd May 2014 Product data sheet PS-LEDP85-DALI-C-1 LED Power Supply | LED Driver | LED Control Gear | DALI | 85 Watt (30 ~ 420mA / 150 ~ 200Vdc ) | CC Wiring diagram Connector CN3 - Settings NTC SET (R1) Ω NTC SET (Temp) °C 2.5K TBD 6.7K TBD 15K TBD 40K TBD FAN SET (R2) Ω Fan SET (Volt) Vdc Open 12 87.56K 10 27.59K 8 8.45K 6 Soft Start (R3) Ω Open 25K 68.1K 150K Soft Start (Time) sec 0 1 2 3 Power Systems GmbH &Co KG Tel.: +49 7062 6759 6 www.power-systems.de Page (7) (Preliminary datasheet) All rights reserved. Version 1.1.1, 23rd May 2014 Product data sheet PS-LEDP85-DALI-C-1 LED Power Supply | LED Driver | LED Control Gear | DALI | 85 Watt (30 ~ 420mA / 150 ~ 200Vdc ) | CC Delivered Accessories • • • • PS-LEDP-Plug 0950 PS-LEDP-Plug 1050 PS-LEDP-Plug 1200 PS-LEDP-Plug 1500 a 1 pcs a 1 pcs a 1 pcs a 1 pcs Accessories • Model: PS-LEDengine 1 • http://www.power-systems.de/en/product-details/?product=1170 • Model: PS-LEDengine 2 • http://www.power-systems.de/en/product-details/?product=1223 • Model: PS-LEDLuminaire • http://www.power-systems.de/en/products/led-lighting/led-luminaire/ • Model: PS-LED-Plug • Other Plugs continuously variable between 200 and 1500 mA Power Systems GmbH &Co KG Tel.: +49 7062 6759 6 www.power-systems.de Page (8) (Preliminary datasheet) All rights reserved. Version 1.1.1, 23rd May 2014 Product data sheet PS-LEDP85-DALI-C-1 LED Power Supply | LED Driver | LED Control Gear | DALI | 85 Watt (30 ~ 420mA / 150 ~ 200Vdc ) | CC Disclaimer Subject to change without prior notice. Please ensure that you have the most recent release. Please find our terms and conditions here: AGB. Contact details Power Systems GmbH & Co.KG Hauptstr. 48 74360 Ilsfeld-Auenstein / Germany Tel.: +49 7062 6759 - 6 Fax: +49 7062 6759 - 800 Email: [email protected] Web: www.Power-Systems.de Commercial register Amtsgericht Stuttgart HRA 104529 Partner liable to unlimited extent Power Systems Verwaltungs GmbH, Ilsfeld General manager Mrs. Andrea Luithle General manager Mr. Holger Dziadek VAT Registration Number (VAT REG NO) DE 234167965 Tax number 65216 / 35600 DIN EN ISO 9001-2008 Regist. No. 454707 QM08, DQS Power Systems GmbH &Co KG Tel.: +49 7062 6759 6 www.power-systems.de Page (9) (Preliminary datasheet) All rights reserved. Version 1.1.1, 23rd May 2014