DU1P0 SERIES 1 WATTS DC-DC CONVERTER FEATURES • 1 WATT UNREGULATED OUTPUT POWER • OUTPUT CURRENT UP TO 0.2A • SINGLE -IN-LINE PACKAGE (SIP) • HIGH EFFICIENCY FOR LOW POWER APPLICATION • INPUT RANGE FROM 4.5VDC TO 5.5VDC, 10.8VDC TO 13.2 VDC, 13.5VDC TO 16.5VDC AND 21.6VDC TO 26.4VDC • UL 94-V0 NON-CONDUCTED CASE • INTERNAL INPUT & OUTPUT FILTER • INPUT TO OUTPUT ISOLATION UP:3kVDC, MIN. • SUFFIX-N ISOLATION LEVEL REINFORCE • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH OPTION 3kVDC ISOLATION APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment DESCRIPTION The DU1P0 series are the standard building blocks for on-board distributed power systems. They are ideally suited to provide single and dual supplies on primarily digital boards with added benefit of galvanic isolation to reduce switching noise. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS Output power 1 Watt, max. Voltage accuracy Minimum load (Note 5) 10% of FL Line regulation LL to HL at Full Load Load regulation 20% to 100% FL Ripple and noise 20MHz bandwidth 1.3% / 1% of Vin 5V output others ± 10% ± 8% See table ±0.1% / ºC, max. Temperature coefficient Short circuit protection (Note 6) 1 Sec, max. GENERAL SPECIFICATIONS Efficiency See table Isolation voltage Input to Output Isolation resistance 500VDC Standard 1000VDC, min. 1minute Suffix-N 3000VDC, min. 1minute Switching frequency 60kHz, min. C type ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature Storage temperature range -25ºC ~ +85ºC (with derating) -55ºC ~ +125ºC Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH IEC60950-1, UL60950-1, & EN60950-1 Case material Non-conductive black plastic Base material None Potting material Epoxy (UL94 V-0) 0.77 X 0.24 X 0.40 Inch (19.6 X 6.1 X 10.2 mm) Dimensions Weight Page 1 of 2 Input filter 4.5 ~ 5.5VDC 10.8 ~ 13.2VDC 13.5 ~ 16.5VDC 21.6 ~ 26.4VDC 9 30pF, max. MTBF (Note 1) 5VDC nominal input 12VDC nominal input 15VDC nominal input 24VDC nominal input 10 ohms, min. Isolation capacitance Safety approvals Input voltage range ± 5% 2.0g (0.071oz) MIL-HDBK-217F 2.019 x 107 hrs www.pduke.com 2014/4/30 DU1P0 SERIES 1 WATTS DC-DC CONVERTER Output Current Model Number Input Range Output Voltage Min. load DU1P0-05S05 DU1P0-05S12 DU1P0-05S15 DU1P0-05D05 DU1P0-05D12 DU1P0-05D15 DU1P0-12S05 DU1P0-12S12 DU1P0-12S15 DU1P0-12D05 DU1P0-12D12 DU1P0-12D15 DU1P0-15S05 DU1P0-15S12 DU1P0-15S15 DU1P0-15D05 DU1P0-15D12 DU1P0-15D15 DU1P0-24S05 DU1P0-24S12 DU1P0-24S15 DU1P0-24D05 DU1P0-24D12 DU1P0-24D15 4.5 ~ 5.5 VDC 4.5 ~ 5.5 VDC 4.5 ~ 5.5 VDC 4.5 ~ 5.5 VDC 4.5 ~ 5.5 VDC 4.5 ~ 5.5 VDC 10.8 ~ 13.2 VDC 10.8 ~ 13.2 VDC 10.8 ~ 13.2 VDC 10.8 ~ 13.2 VDC 10.8 ~ 13.2 VDC 10.8 ~ 13.2 VDC 13.5 ~ 16.5 VDC 13.5 ~ 16.5 VDC 13.5 ~ 16.5 VDC 13.5 ~ 16.5 VDC 13.5 ~ 16.5 VDC 13.5 ~ 16.5 VDC 21.6 ~ 26.4 VDC 21.6 ~ 26.4 VDC 21.6 ~ 26.4 VDC 21.6 ~ 26.4 VDC 21.6 ~ 26.4 VDC 21.6 ~ 26.4 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 20mA 8.3mA 6.7mA ± 10mA ± 4.2mA ± 3.3mA 20mA 8.3mA 6.7mA ± 10mA ± 4.2mA ± 3.3mA 20mA 8.3mA 6.7mA ± 10mA ± 4.2mA ± 3.3mA 20mA 8.3mA 6.7mA ± 10mA ± 4.2mA ± 3.3mA (3) Output Full load Ripple & Noise 200mA 83mA 67mA ± 100mA ± 42mA ± 33mA 200mA 83mA 67mA ± 100mA ± 42mA ± 33mA 200mA 83mA 67mA ± 100mA ± 42mA ± 33mA 200mA 83mA 67mA ± 100mA ± 42mA ± 33mA 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p No load Input Current Eff (%) Capacitor Load (4) max 42mA 32mA 35mA 40mA 35mA 40mA 17mA 17mA 18mA 18mA 18mA 18mA 20mA 18mA 18mA 18mA 16mA 16mA 12mA 12mA 10mA 12mA 10mA 10mA 77 82 81 78 82 81 77 82 79 77 81 82 73 79 80 75 80 80 72 78 78 75 78 79 330µF 330µF 330µF ±150µF ±150µF ±150µF 330µF 330µF 330µF ±150µF ±150µF ±150µF 330µF 330µF 330µF ±150µF ±150µF ±150µF 330µF 330µF 330µF ±150µF ±150µF ±150µF (2) (3) Note 1. 2. 3. 4. 5. MIL-HDBK-217F @Ta=25 ºC, Full load. Typical value at nominal input voltage and no load. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistive load. The output requires a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. CAUTION: This power module is not internally fused. An input line fuse must always be used. MECHANICAL DRAWING ： STANDARD PIN 1 2 4 5 6 SINGLE +INPUT -INPUT -OUTPUT NC +OUTPUT DUAL +INPUT -INPUT -OUTPUT COMMON +OUTPUT “SUFFIX-N” Models PIN 1 2 SINGLE +INPUT -INPUT DUAL +INPUT -INPUT 5 6 7 -OUTPUT NC +OUTPUT -OUTPUT COMMON +OUTPUT 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01 (0.25) 3. Pin dimension tolerance ±0.004 (0.1) Page 2 of 2 www.pduke.com 2014/4/30