TEA1P5 SERIES 1.5 WATTS APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment T E C H N I C A L S P E C I F I C AT I O N FEATURES • 1.5 WATTS MAXIMUM OUTPUT POWER • OUTPUT CURRENT UP TO 400mA • PACKAGE, 1.10 x 0.63 x 0.31 INCH • HIGH EFFICIENCY UP TO 76% • 2:1 WIDE INPUT VOLTAGE RANGE • FIVE-SIDED SHIELD • SWITCHING FREQUENCY 100k TO 1500kHz. • NO EXTERNAL INPUT AND OUTPUT CAPACITOR NEEDED • LOW RIPPLE & NOISE • OVER CURRENT PROTECTION • SHORT CIRCUIT PROTECTION • LONG LIFE WITHOUT ELECTROLYTIC CAPACITOR • CE MARK MEETS 2006/95/EC, 2011/95/EC AND 2004/108/EC • SAFETY MEETS J60950-1, UL60950-1, EN60950-1 AND IEC60950-1 • ISO9001 CERTIFIED MANUFACTURING FACILITIES • COMPLIANT TO RoHS EU DIRECTIVE 2011/65/EU DESCRIPTION The TEA1P5 series offer 1.5 watts of output power from a 1.10 x 0.63 x 0.31 inch package without derating to 85ºC and without external input/output capacitor. The TEA1P5 series with 2:1 wide input voltage of 4.5~9VDC, 9~18VDC, 18~36VDC and 36~75VDC and features 500VAC of isolation, short-circuit protection. All specifications are typical at nominal input, full load and 25ºC otherwise noted INPUT SPECIFICATIONS OUTPUT SPECIFICATIONS Maximum output power Voltage accuracy 1.5 Watts Input voltage range ± 1% Minimum load 0% Line regulation LL to HL at Full Load ± 0.2% Load regulation No load to Full Load ± 0.5% Ripple and noise 50MHz bandwidth See table Maximum temperature drift ±0.02% / ºC, max. Transient response recovery time 25% load step change 500µs Short circuit protection Continuous, automatics recovery Over current protection 180% OUTPUT VOLTAGE ADJUSTMENT TERMINAL(Vset) (Note 6) Model number Open -OUTPUT shorted +OUTPUT shorted XXS33 3.3VDC 3.67VDC 2.84VDC XXS05 5VDC 6VDC 4.3VDC XXS12 12VDC 15VDC ±12VDC XXD12 ±15VDC -OUTPUT connected +OUTPUT connected Model number Open with resistance (7) with resistance (7) XXS33 3.3VDC 3.3 to 3.67VDC (8-1) 3.3 to 2.84VDC (8-2) 5VDC 5 to 6VDC (8-3) 5 to 4.3VDC (8-4) XXS05 12VDC 12 to 15VDC (8-5) XXS12 ±12VDC ±12 to ±15VDC (8-6) XXD12 GENERAL SPECIFICATIONS 5VDC nominal input 12VDC nominal input 24VDC nominal input 48VDC nominal input Input filter Input surge voltage 4.5 ~ 9VDC 9 ~ 18VDC 18 ~ 36VDC 36 ~ 75VDC L-C filter 5VDC input 12VDC input 24VDC input 48VDC input 15VDC 100ms, max. 36VDC 100ms, max. 50VDC 100ms, max. 100VDC 100ms, max. ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature Operating case temperature range Storage temperature range Cooling -25ºC ~ +85ºC (Non-derating) -25ºC ~ +100ºC -55ºC ~ +125ºC Natural convection Thermal shock MIL-STD-810F At no operation, 10~55~10Hz (sweep for 15min.) amplitude Vibration 1.5mm constant (maximum 9G X, Y, Z 2hrs each) Operating humidity range 20% to 95% RH Storage humidity range 20% to 95% RH EMC CHARACTERISTICS See table EMI(Note 9) Input to Output 500 VAC, min. 1minute Input (Output) to Case 500 VAC, min. 1minute Isolation resistance Input to Output 50M ohms, min. 500VDC Input (Output) to Case 50M ohms, min. 500VDC Isolation capacitance 300 pF, max. Design meet safety standard IEC60950-1, J60950-1, UL60950-1, EN60950-1 Switching frequency Full load to No load 100k to 1500k Hz Case material Metal case Base material None Weight 8.0g (0.28oz) 1.10 x 0.63 x 0.31 Inch Dimension (28.0 x 16.0 x 7.8 mm) MTBF (Note 1) MIL-HDBK-217F 1.355 x 107 hrs Efficiency Isolation voltage Page 1 of 3 DC-DC CONVERTER www.pduke.com EN55022 Class A,Class B 2013/9/13 TEA1P5 SERIES 1.5 WATTS Model Number DC-DC CONVERTER (2) (3) Output Current Output Output Output No Load Voltage Voltage Range Min. load Full load Ripple&Noise Input Current Input Range (4) Eff (%) (5) Capacitor Load max TEA1P5-05S33 4.5 ~ 9 VDC 3.3 VDC 2.84 ~ 3.67 VDC 0mA 400mA 75mVp-p 25mA 69 1650µF TEA1P5-05S05 4.5 ~ 9 VDC 4.3 ~ 6 VDC 0mA 300mA 75mVp-p 30mA 73 750µF TEA1P5-05S12 4.5 ~ 9 VDC 12 VDC 12 ~ 15 VDC 0mA 125mA 75mVp-p 35mA 73 350µF TEA1P5-05D12 4.5 ~ 9 VDC ±12 VDC ±12 ~ ±15 VDC 0mA ±60mA 75mVp-p 45mA 74 ±120µF 3.3 VDC 2.84 ~ 3.67 VDC 5 VDC 0mA 400mA 75mVp-p 10mA 74 1650µF TEA1P5-12S05 9 ~ 18 VDC 5 VDC 4.3 ~ 6 VDC 0mA 300mA 75mVp-p 10mA 75 750µF TEA1P5-12S12 9 ~ 18 VDC 12 VDC 12 ~ 15 VDC 0mA 125mA 75mVp-p 15mA 77 350µF ±12 ~ ±15 VDC 0mA ±60mA 75mVp-p 30mA 74 ±120µF TEA1P5-24S33 18 ~ 36 VDC 3.3 VDC 2.84 ~ 3.67 VDC 0mA 400mA 75mVp-p 5mA 72 1650µF TEA1P5-24S05 18 ~ 36 VDC 750µF TEA1P5-12S33 9 ~ 18 VDC TEA1P5-12D12 9 ~ 18 VDC ±12 VDC 5 VDC 4.3 ~ 6 VDC 0mA 300mA 75mVp-p 5mA 75 TEA1P5-24S12 18 ~ 36 VDC 12 VDC 12 ~ 15 VDC 0mA 125mA 75mVp-p 10mA 75 350µF TEA1P5-24D12 18 ~ 36 VDC ±12 VDC ±12 ~ ±15 VDC 0mA ±60mA 75mVp-p 10mA 75 ±120µF TEA1P5-48S33 36 ~ 75 VDC 3.3 VDC 2.84 ~ 3.67 VDC 0mA 400mA 75mVp-p 5mA 74 1650µF TEA1P5-48S05 36 ~ 75 VDC 750µF 5 VDC 4.3 ~ 6 VDC 0mA 300mA 75mVp-p 5mA 76 TEA1P5-48S12 36 ~ 75 VDC 12 VDC 12 ~ 15 VDC 0mA 125mA 75mVp-p 5mA 75 350µF TEA1P5-48D12 36 ~ 75 VDC ±12 VDC ±12 ~ ±15 VDC 0mA ±60mA 75mVp-p 5mA 75 ±120µF Note: 1. MIL-HDBK-217F @Ta=25 ºC, Full load. 2. Maximum value at nominal input and full load. 3. Typical value at nominal input and no load. 4. Typical value at nominal input and full load. 5. Test by minimum input and constant resistive load. 6. The following output voltage can be obtained by connecting this terminal to an output + or – terminal. Unless the output voltage is adjusted, this terminal should be open. 7. In addition, the voltage can be adjusted not by shorting these terminals, but by connecting them to resistances as shown below. 8. Arithmetic expression connected resistance: R ( kΩ ) 8-1 Vo=(3.3*R+36.7)/(R+10) 8-2 Vo=(3.3*R+36.7)/(R+12.92) 8-3 Vo=2.5*[2+2.7/(R+6.8)] 8-4 Vo=2.5*[2-2.7/(R+9.5)] 8-5 Vo=2.5+9.5(R+10.9)/(R+8.2) [Between two outputs] 8-6 Vo=2.5+22*(R+12.7)/(R+10) [Between two outputs] 9. The TEA1P5 series standard module meets EN55022 Class A and Class B with external components. For more detail information, please contact with P-DUKE. CAUTION: This power module is not internally fused. An input line fuse must always be used. TEA1P5-48S05 Derating Curve TEA1P5-48S05 Efficiency VS Output Current 85 85 80 80 EFFICIENCY(%) EFFICIENCY(%) TEA1P5-48S05 Efficiency VS Input Voltage 75 70 65 70 65 60 60 55 55 36 Page 2 of 3 75 40 44 48 52 56 60 64 INPUT VOLTAGE(V) 68 72 75 www.pduke.com 10 20 30 40 50 60 70 % of FULL LOAD 80 90 100 2013/9/13 TEA1P5 SERIES 1.5 WATTS MECHANICAL DRAWING DC-DC CONVERTER ： 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01 (0.25) 3. Pin dimension tolerance ±0.004 (0.1) PIN CONNECTION PIN 1 2 3 4 5 6 7 8 9 10 Page 3 of 3 SINGLE + INPUT - INPUT NC - OUTPUT Vset + OUTPUT CASE STAND OFF CASE STAND OFF CASE CASE EXTERNAL OUTPUT TRIMMING DUAL + INPUT - INPUT - OUTPUT COMMON Vset + OUTPUT CASE STAND OFF CASE STAND OFF CASE CASE Output can be externally trimmed by using the method shown below. ( ) for dual output trim www.pduke.com TRIM UP 4(3) TRIM DOWN 5(5) RU 5(5) RD 6(6) 2013/9/13