ADNS-6150 Small Form Factor Lens Description t C on fid en tia l Data Sheet Pix Ar The ADNS-6150 small form factor (SFF) laser mouse lens is designed for use with PixArt Imaging ADNS-7530 and ADNS-7550 LaserStream™ sensors. Together with the VCSEL, the ADNS-6150 SFF lens provides the directed illumination and optical imaging necessary for proper operation of the sensor. ADNS-6150 SFF lens is a precision molded optical component and should be handled with care to avoid scratching of the optical surfaces. Notes: 1. Dimensions in millimeters/inches. 2. Dimensional tolerance: ± 0.10mm 3. Angular tolerance: ± 3° 4. Maximum flash: ± 0.20mm 5. ( ) Reference Dimension Figure 1. ADNS-6150 SFF lens outline drawings and details All specifications reference Figure 2 and Figure 3, Optical System Assembly Diagram l Mechanical Assembly Requirements Symbol Min. Typ. Max. Units Conditions Distance from Object Surface to Lens Reference Plane A 2.18 2.40 2.62 mm For ADNS-6150 with ADNS-7550 and ADNS-7530 sensors Distance from Object Surface to Sensor Pin Reference Plane B mm ADNS-7550 or ADNS-7530 Sensor Pin Reference Plane must be in contact with Lens Housing Surface nfi de n 8.35 tia Parameters Lens Design Optical Performance Specifications All specifications are based on the Mechanical Assembly Requirements. Parameters Symbol Design Wavelength λ Lens Material* Index of Refraction N Min. Typ. Max. 842 1.5693 Units Conditions nm 1.5713 1.5735 λ = 842 nm *Lens material is polycarbonate. Cyanoacrylate based adhesives should not be used as they will cause lens material deformation. Co ADNS-7550 or ADNS-7530 sensor B ADNS-6150 Lens A Object Surface Pix Ar t Figure 2. ADNS-7550 and ADNS-7530 optical system assembly (front view) 2 Figure 3. PixArt Imaging logo location Mounting Instructions for the ADNS-6150 SFF Laser Mouse Lens to the Base Plate tia l An STEP or IGES format drawing file with design specifications for laser mouse base plate features is available. These features are useful in maintaining proper positioning and alignment of the ADNS-6150 SFF lens when used with the PixArt Imaging ADNS-7530 or ADNS-7550 LaserStream™ sensor. This file can be obtained by contacting your local PixArt Imaging sales representative. nfi de n ADNS-6150 SFF Lens Customer Supplied Base Plate Pix Ar t Co Figure 4. Illustration of base plate mounting features for ADNS-6150 SFF lens All rights reserved. No reproduce, copy or transform any portion is allowed. Data subject to change. PixArt Imaging Inc. E-mail: [email protected] AV02-0686EN - October 11, 2011