KGEA-SMD PKE emitter antennas Keyless go emitter antenna smd 75x15x6.3mm (33 µH - 500 µH) Characteristics This emitter antenna is specifically designed for applications in which it is necessary to get a big read range with a minimum size on PCB in low frequency base stations. It is a perfect solution to be used in vehicles passive entry applications (PE, passive entry) or TPMS (Tire Pressure Monitoring system). It has 75mm x 15mm x 6.3mm for SMD assembly. The module antenna is formed only by ferrite core wound inside of a plastic housing and it filled with resin of polyurethane. - High reading distance with minimum size. - Designed for a range of working frequency LF (20kHz, 125kHz and 134,2kHz). - Antenna current. Max. 4 App, Duty 30% - High stability in temperature (- 40ºC to +85ºC). - SMD mounting and customer inductance value under demand. Dimensions and Pad layout Electrical diagram All dimensions are in mm Nomenclature description KGEA-SMD Electrical specifications P/N KGEA-SMD-B-0108J KGEA-SMD-B-0162J KGEA-SMD-B-0240J KGEA-SMD-B-0345J KGEA-SMD-B-0500J KGEA-SMD-C-0030J KGEA-SMD-C-0141J KGEA-SMD-C-0207J KGEA-SMD-C-0300J KGEA-SMD-C-0426J L (mH) Cres (nF) Q SRF (MHz) Freq. (kHz) 0.108 0.162 0.240 0.345 0.500 0.030 0.141 0.207 0.300 0.426 15,00 10,00 6,8 4,7 3,3 47,00 10,00 6,8 4,7 3,3 >110 >125 >125 >125 >125 >75 >125 >130 >130 >130 >3 >3 >3 >3 >3 >3 >3 >3 >3 >3 125@ 125@ 125@ 125@ 125@ 134,2@ 134,2@ 134,2@ 134,2@ 134,2@ Tolerance J=5%. This chart is a reference guide for the most common required values at working frequency of 20 kHz, 125 kHz or 134.2 kHz. Any other inductance value at LF or tighter tolerances can be provided. Please contact our sales department for any inquiry. Sensitivity measured with Helmholtz coils H=8.36 App/m @125 kHz. Contact us for measurement specification. 54