KGEA BFCAM BFCAM Emitter Antenna Low Profile 85x13x7mm Housing plastic base-potted and outside connector unsealed & sealed C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas. Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 1. Features - Ideally used access and start Hand Free subsystem for Passive Entry keyless Go System Requirements for automotive application. Connector: Optional Unsealed & Sealed 2. Dimensions L> 20mm tolerance ± 0.5mm 10< L ≤ 20mm tolerance ± 0.2mm L ≤ 10mm tolerance ± 0.1mm 3. Schematic Diagram L: Ferrite core coil inductance R: Copper resistance and connection C: Tunning internal capacitor NPO Z: External impedance 1 Emitter Antennas LF All rights reserved. Share, use or communication of the contents of this document not permitted without written authorisation. KGEA BFCAM BFCAM Emitter Antenna Low Profile 85x13x7mm Housing plastic base-potted and outside connector unsealed & sealed C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas. Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 4. Nomenclature: 5. Functional Performance: Typical Operating Frequencies fo: 125 kHz and 134 kHz. Temperature Range: -40 ºC -> +85 ºC. Storage temperature: -40 ºC -> +105 ºC Antenna Current: MAX 2.8App, Duty 30% Tolerances: (fo ± 2% @ 25ºC and fo ± 5% @ [-40ºC to 85ºC] ) Products comply with RoHS requirements. This part is according to AEC-Q200 Revision C. 6. Electrical Characteristics KGEAKGEA-BFC BFCAM Code L (mH) Q min Freq (KHz) KGEA-BFCAM-B-0345J 0.345 115 125 SRF Coil (Mhz) >3 KGEA-BFCAM-B-0500J 0.500 115 125 >3 KGEA-BFCAM-C-0207J 0.207 100 134,2 >3 KGEA-BFCAM-C-0426J 0.426 100 134,2 >3 Length (mm) Width (mm) Height (mm) 85 13 7 2 Emitter Antennas LF All rights reserved. Share, use or communication of the contents of this document not permitted without written authorisation. KGEA BFCAM BFCAM Emitter Antenna Low Profile 85x13x7mm Housing plastic base-potted and outside connector unsealed & sealed C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas. Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 7. Packaging information BLISTER SPECIFICATION (All Dimensions in mm) Material PET or similar. 2 pieces per cavity blister Parts per blister: 48pcs Package: 8 blisters 8.- Printing and Labelling PART PRINTING PACKAGE LABELLING PART NUMBER BATCH/DATE Edition 1 Revision Date 07/08/09 3 Emitter Antennas LF All rights reserved. Share, use or communication of the contents of this document not permitted without written authorisation.