Subminiature PCB Telecom Relay With Bifurcated Contacts PC324S FEATURES Subminiature design DIL Package for PC board or socket Contact capacity from 1 mA to 2 A Meets FCC part 68 voltage surge Class "B" insulation standard Sealed immersion cleanable Bifurcated crossbar contacts File # E86876 CONTACT RATINGS 2 Form C DPDT (crossbar contacts) Contact Form Switching Current Range 1 mA to 2 A Switching Voltage Range 10 mVAC - 250VAC; 10 mVDC - 220 VDC Max. Continuous Current 2 Amps Switching Power Range 10 micro W to 60 W / 125 VA UL Rated Loads 2A / 30 VDC 0.6A / 125 VAC CONTACT DATA Material AgNi + Au (Silver Nickle + Gold Clad) AgRu + Au (Silver Ruthenium + Gold Clad) Initial Contact Resistance 50 mOhm max @ 1mA, 20mV, 1KHz, meets DIN 4160 part 4 Service Life 5 Electrical 3 X 10 Operations Mechanical 1 X 10 8 Operations COIL DATA Type Resistance Ohms + 10% Coil Voltage 0.40 W 2.1 3.5 2.1 - 7.0 3.5 -7.8 1.0 1.25 0.3 0.5 4.2 6.3 4.2 - 9.7 6.3 - 14.5 1.5 2.25 0.6 0.9 8.4 16.8 33.6 8.4 - 19.4 16.8 - 37.6 33.6 - 74.2 3 6 12 1.2 2.4 4.8 2.1 3.5 2.1 - 7.0 3.5 -7.8 1.0 1.25 4.2 6.3 4.2 - 9.7 6.3 - 14.5 1.5 2.25 0.3 0.5 0.6 8.4 16.8 33.6 8.4 - 19.4 16.8 - 37.6 33.6 - 74.2 3 6 12 45 66 6 9 140 12 24 48 280 1070 3900 22.5 3 5 Coil Code B Allowable Operating Voltage Range 16 3 5 Coil Code A 0.56 W TO 0.59 W Must Operate Voltage Max. (VDC) 62.5 6 90 9 12 203 360 1440 24 48 5760 Hold Voltage Note: Custom coil voltages within the ranges shown are available on special order. ORDERING INFORMATION Example: PC324S -12 R A Model Coil Voltage Contact Material Nil: AgNi + Au; P: AgRu + Au Sensitivity A: 0.56 W; B: 0.40 W 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: (888)997-3933 Fax: (818) 342-5296 email: [email protected] URL: pickercomponents.com PC324S Rev C 12-28-04 PAGE 1 Must Release Voltage 0.9 1.2 2.4 4.8 PC324S PC324S CHARACTERISTICS Operate Time Operate Bounce Release Time Release Bounce Insulation Resistance 5 ms. max. 1 ms. typical 3 ms. max. 2.5 ms. typical 1000 Megohms min. at 500 VDC, 50% RH 1000 V rms, 1 min. between coil and contacts and between adjacent parts 1000 V rms, 1 min. between open contacts Dielectric Strength 1500 V, between coil and contacts (FCC Part 68) 0.7 pf max. between contacts; 0.9 pf max. between adjacent poles; 1.0 pf max. between coil and contacts 50 g, 11 ms. 10 g, 10 - 70 Hz Surge Strength Capacitance Shock Resistance Vibration Resistance Allowable Max. Power Consumption at 20 C 1.02 W Ambient Temperature Power Consumption Weight -40 degrees C to 65 degrees C (-40 degrees C to 70 degreec C for 0.4 w coil) 0.40 W to .59 W 4.5 grams approx. Dimensions in Inches (millimeters) Drawings are 2X actual size Side View End View .787 (20.0) .386 (9.8) .472 (12.0) .130 (3.3) .30 (7.62) .20 .20 (5.08) (5.08) .30 (7.62) Bottom View PC Board Layout .040 Dia. Typ. (1.0) Wiring Diagram Notes: Tolerances + .010 unless otherwise noted 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: (888)997-3933 Fax: (818) 342-5296 email: [email protected] URL: pickercomponents.com PAGE 2