OPTO-Fire® - FC8000 series

I N D E V E LO PM E N T
OPTO-Fire® - FC8000 series
Harsh Environment 10Mbps to 12.5Gbps Optical Quad transceiver
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Quad Tx & Rx Single and multi-channel 10Mbps to 12.5Gbps per channel Operating temperature range -40°C to +95°C
Storage temperature range -55°C to +125°C Average optical power per channel typically 2.2mW Built in test (BiT) 50/125 um multimode ribbon fibre
850nm wavelength I2C comms capable
Optical Time Domain Reflectometry (OTDR) functionality 1 KB (OTP) non-volatile memory
Field replaceable fibre assembly Option of hermetic or low cost non-hermetic package Radiation tolerant circuitry High Rx dynamic range with AGC (Automatic Gain Control)
Individual channel power down & software defined Squelch
Tx “broadcast” mode - data stream replicated on up to 4 channels The OPTO-Fire® transceiver range is based on a high performance ruggedised optical interface
from Ultra Communications Inc (qualified and operational in space). The modules are designed,
qualified & manufactured in the UK for harsh environments on land, sea, air & space in accordance
to MIL-PRF-38534 and are configurable for bidirectional optical data communications over
multimode ribbon fibre links.
The module provides high-speed electrical-to-optical and optical-to-electrical conversion across four
independent transmitter (Tx) and receiver (Rx) channels. It is sealed for use in harsh environments
such as avionics and space and features Built-in-Test (BiT) capabilities and diagnostic monitoring
through a digital serial interface.
BiT Features includes:
•
•
•
•
•
•
Avionics and Space applications
TSSI (Transmitter Signal Strength Indicator)
TMSI (Transmitter Modulation Strength Indicator)
Temperature sensor
RSSI (Receiver Signal Strength Indicator)
RMSI (Receiver Modulation Strength Indicator)
Critical Transceiver operating conditions
Parameter (Tx)
Min
Data rate per chl
•
•
•
•
•
•
100 - 800Mbps FireWire & SpaceWire
1x – 10x Fibre Channel
1 - 10Gbps Ethernet
2.5 Gbps PCI Express
Serial Rapid IO
Vita 17.2
Typ
Max
Units
-
12.5
Gbps
850
860
nm
Optical 
830
Pk to Pk differential input voltage
400
-
1600
mV
Input differential resistance
80
100
120
Ω
Differential input common mode
-
0.85
*VDDC
-
V
Differential input rise/fall time
-
-
200
ps
Output propagation delay
-
-
1
ns
Deterministic jitter contribution @ 10Gbps
-
-
55
psp-p
Average Optical power per Chl
-
2.2
-
mW
Parameter (Rx)
Min
Typ
Max
Units
Data rate per Chl
0.01
-
12.5
Gbps
Pk to Pk differential output voltage
400
730
850
mV
-
30
-
ps
80
100
120
Ω
Differential output rise/fall time
CML differential load impedance
Total Jitter contribution @ 10 Gbps
-
-
22
psp-p
Deterministic jitter contribution @ 10 Gbps
-
2
10
psp-p
Receiver overload @5 Gbps
-
+1.5
-
dBm
Receiver sensitivity @ 5 Gbps
-
-20
-
dBm
Receiver sensitivity @ 10 Gbps
-
-16.5
-
dBm
Subject to design change
Custom
Package
Options
Available
+44 1493.743100
micro.apitech.com
+1 855.294.3800
www.apitech.com