API Technologies’ Spectrum Control Brand Products Overmolded Backshell Datasheet Product Properties Adhesive Standard Properties Color Chemical Base Application temperature [°C] Glass transition temperature [°C] Cold flexibility [°C] Temperature stableness [°C] Softening point [°C] Injection temperature [°C] Thermal expansion coefficient [1/K] Flammability Density [g/cm3] Shore-A-hardeness Shore-D-hardeness Tensile stress at yield [N/mm2] Tensile strength at rupture [N/mm2] Elongation at rupture [%] Dielectric constant [1kHz] Volume resistivity [Ω cm] Dielectric strength [kV/mm] Viscosity bei 180°C [mPa s] Viscosity bei 190°C [mPa s] Viscosity bei 200°C [mPa s] Viscosity bei 210°C [mPa s] Viscosity bei 220°C [mPa s] Viscosity bei 230°C [mPa s] Injection temperature [°C] Water Absorption [%] *=it depends on the project Thermal Properties * DSC 2. Lauf ASTM D3111 Henkel Methode HM 11 ASTM E 28 PVT (50-80)°C UL 94 Mechanical Properties DIN 53479 DIN 53505 DIN 53455 Electrical Properties VDE 0303 Teil 4 VDE 0303 Teil 3 VDE 0303 Teil 2 Application Properties ASTM D 3236 Water Absorption DIN 53495; 24 h, RT DIN 53495; 72h, 85° Macromelt® OM 641/646 Amber/black Polyamid -40 / + 130 -35 -40 155 175 200-240 5x10-4 V0 0,98 92 5 9 700 5-7 1013 ̴20 7000 5000 3500 200-240 0,8 4 Information provided herein is based upon our practical knowledge and experience. Due to different materials being used, as well as varying working conditions, which are beyond our control, we strictly recommend carrying out intensive trials as well as consultation of our technical personnel. Any warranty and/or liability shall not be derived from above information. Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com