High Performance SAW Oscillators API Technologies, a leading supplier of standard and custom SAW Oscillators, combines low phase noise, excellent frequency stability and rugged construction in a line-up of cost effective solutions. Low Phase Noise Performance Our SAW Oscillators utilize a low jitter planar SAW which translates to extremely low phase noise performance and exceptionally low accumulated jitter. These high performance SAW Oscillators, in frequencies from 100 MHz to 20 GHz, contain features found in higher priced designs including: ü Exceptionally Low Phase Noise to -124 dBc/Hz at 1 kHz offset ü Superior Phase Jitter less than 1 psec rms ü High Stability of less than 10 ppm/year Low Jitter Sources Our family of Low Jitter Clock Sources provide less than 3 psec (RMS) jitter and are available in multiple formats and configurations including: ü ECL ü PECL ü 3.3 V LVPECL 100% Testing All API Technologies SAW Oscillators undergo rigorous electrical testing at pre-seal and post-seal for critical parameters, both at room and over temperature, including: ü ü ü ü Phase Noise Center Frequency Pull Range Tuning Linearity ü Spurious ü Harmonics ü Output Power Voltage Controlled SAW Oscillators Part Number MN724-0100.0000 MN724-0300.0000 MN724-0400.0000 MN725-0400.0000 MN724-0435.2000 MN724-0475.0000 MN724-0491.5200 MN724-0500.0000 MN725-0500.0000 MN724-0533.3300 MN724-0614.4000 MN724-0621.9100 MN724-0622.0800 MN724-0624.8200 MN724-0625.0000 MN725-0625.0000 MN724-0627.3300 MN724-0637.5000 MN724-0640.0000 MN724-0644.5300 MN724-0657.4200 MN724-0666.3300 MN724-0666.5100 MN724-0669.1500 MN724-0669.3300 MN724-0669.6400 MN724-0672.1600 MN724-0690.5700 MN724-0693.4800 MN724-0696.4200 MN724-0696.6149 MN724-0698.8123 MN724-0707.3530 MN724-0719.7300 MN724-0750.0000 MN724-0777.6000 MN724-0787.7100 MN724-0840.0000 MN724-0843.7500 MN724-0873.8115 MN724-0950.0000 MN724-0983.0400 MN724-1000.0000 MN724-1066.6600 MN724-1228.8000 MN724-1243.8200 MN724-1244.1600 MN724-1249.6400 MN724-1250.0000 MN725-1250.0000 MN724-1254.6600 MN724-1275.0000 MN724-1280.0000 MN724-1289.0600 MN724-1314.8400 MN724-1332.6600 MN724-1333.0200 MN724-1338.3000 MN724-1338.6600 MN724-1339.2800 MN724-1344.3200 MN724-1381.1400 MN724-1386.9600 MN724-1392.8400 Center Frequency (MHz) 100 300 400 400 435.2 475 491.52 500 500 533.33 614.4 621.91 622.08 624.82 625 625 627.33 637.5 640 644.53 657.42 666.33 666.51 669.15 669.33 669.64 672.16 690.57 693.48 696.42 696.6149 698.8123 707.353 719.73 750 777.6 787.71 840 843.75 873.8115 950 983.04 1000 1066.66 1228.8 1243.82 1244.16 1249.64 1250 1250 1254.66 1275 1280 1289.06 1314.84 1332.66 1333.02 1338.3 1338.66 1339.28 1344.32 1381.14 1386.96 1392.84 Tuning BW (ppm) 14300 3500 2100 700 2200 1700 2000 2000 700 1800 1600 1600 1500 1600 1600 700 1600 1500 1500 1600 1600 1600 1500 1500 1500 1500 1600 1500 1400 1500 1500 1500 1400 1400 1300 1400 1200 1300 1200 1900 900 1000 1000 900 800 800 800 800 800 700 800 800 800 800 800 800 700 700 700 700 800 800 700 800 Phase Noise (dBc/Hz) Temperature Range (°C) -112 -111 -110 -109 -109 -109 -109 -109 -109 -109 -108 -108 -108 -108 -108 -109 -108 -108 -108 -108 -108 -108 -108 -108 -108 -108 -107 -107 -107 -107 -107 -107 -107 -107 -107 -107 -107 -106 -106 -106 -105 -105 -105 -105 -103 -103 -103 -103 -103 -103 -103 -103 -103 -103 -103 -103 -103 -103 -103 -103 -103 -102 -102 -102 -40 to +85 -40 to +85 -40 to +85 -55 to +100 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -55 to +100 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -55 to +100 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -55 to +100 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 Package Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Voltage Controlled SAW Oscillators Part Number Center Frequency (MHz) Tuning BW (ppm) Phase Noise (dBc/Hz) Temperature Range (°C) Package MN724-1393.2298 MN724-1397.6246 MN724-1414.7060 MN724-1439.4600 MN724-1500.0000 MN724-1555.2000 MN724-1575.4200 MN725-1675.0000 MN724-1680.0000 MN725-1687.0000 MN724-1687.5000 MN724-1747.6230 MN724-1900.0000 MN724-1966.0800 MN724-2000.0000 MN724-2133.3200 MN724-2457.6000 MN724-2487.6400 MN725-2488.0000 MN724-2488.3200 MN724-2499.2800 MN725-2500.0000 MN724-2500.0000 MN724-2509.3200 MN724-2550.0000 MN724-2560.0000 MN724-2578.1200 MN724-2629.6800 MN724-2665.3200 MN724-2666.0400 MN724-2676.6000 MN724-2677.3200 MN724-2678.5600 MN724-2688.6400 MN724-2762.2800 MN724-2773.9200 MN724-2785.6800 MN724-2786.4596 MN724-2795.2492 MN724-2829.4120 MN724-2878.9200 MN724-3000.0000 MN724-3110.4000 MN724-3150.8400 MN725-3350.0000 MN724-3360.0000 MN724-3375.0000 MN725-3375.0000 MN724-3495.2460 1393.2298 1397.6246 1414.706 1439.46 1500 1555.2 1575.42 1675 1680 1687 1687.5 1747.623 1900 1966.08 2000 2133.32 2457.6 2487.64 2488 2488.32 2499.28 2500 2500 2509.32 2550 2560 2578.12 2629.68 2665.32 2666.04 2676.6 2677.32 2678.56 2688.64 2762.28 2773.92 2785.68 2786.4596 2795.2492 2829.412 2878.92 3000 3110.4 3150.84 3350 3360 3375 3375 3495.246 800 800 700 700 700 700 600 700 700 700 600 1000 400 500 500 500 400 400 700 400 400 700 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 300 300 300 300 300 700 300 300 700 500 -102 -102 -102 -102 -102 -101 -101 -100 -101 -100 -101 -100 -99 -99 -99 -98 -97 -96 -97 -96 -96 -97 -96 -96 -96 -96 -96 -96 -96 -96 -96 -96 -96 -96 -95 -95 -95 -95 -95 -95 -95 -94 -94 -94 -93 -93 -93 -93 -93 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -55 to +100 -40 to +85 -55 to +100 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -55 to +100 -40 to +85 -40 to +85 -55 to +100 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -55 to +100 -40 to +85 -40 to +85 -55 to +100 -40 to +85 Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Performance is typical measured at 25°C. Phase Noise is measured at 1 kHz offset. Voltage Controlled SAW Oscillators API Voltage Controlled SAW Oscillators are design for both performance and reliability. With your choice of either hermetic kovar or low cost package options, these low phase noise oscillators feature low vibration sensitivity of For more information or to let us know how we may help you, please contact us at temperature range. 888.879.4099 ┌ = 2x10-9/g while delivering linear tuning over a wide Multiple Features High performance is the cornerstone of our SAW Oscillator designs. We use a low loss planar SAW device as the frequency controlling element. Adding multiple complimentary features including gold for low loss and kovar SAW packages results in a product with inherent high reliability to meet today’s demanding requirements. Fixed Frequency SAW Oscillators Part Number Center Frequency (MHz) Phase Noise (dBc/Hz) MN715-0303.8250 MN715-0418.0000 MN715-0425.0000 MN715-0500.0000 MN715-0563.0000 MN715-0625.0000 MN715-0700.6000 MN715-0840.0000 MN715-0940.0000 MN715-0960.0000 MN715-0970.0000 MN715-0991.0000 MN715-1000.0000 MN715-1009.0000 MN715-1028.0000 MN715-1030.0000 MN715-1048.0000 MN715-1080.0000 MN715-1090.0000 MN715-1100.0000 MN715-1110.0000 MN715-1133.0000 MN715-1150.0000 MN715-1151.0000 MN715-1155.0000 MN715-1160.0000 MN715-1165.0000 MN715-1290.0000 303.825 418 425 500 563 625 700.600 840 940 960 970 991 1000 1009 1028 1030 1048 1080 1090 1100 1110 1133 1150 1151 1155 1160 1165 1290 -129 -129 -128 -128 -127 -127 -126 -125 -124 -124 -124 -124 -124 -124 -124 -124 -124 -123 -123 -123 -123 -123 -123 -123 -123 -123 -123 -122 Stability (ppm/year) DC Supply (V) Package 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 DIP DIP DIP DIP DIP DIP DIP DIP DIP DIP DIP DIP DIP DIP DIP DIP DIP DIP DIP DIP DIP DIP DIP DIP DIP DIP DIP DIP 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Performance is typical measured at 25°C. Phase Noise is measured at 1 kHz offset. Phased Locked Voltage Controlled SAW Oscillators Designed for high-end commercial and military applications, these low phase noise Phased Locked designs combine the high fundamental frequency and low phase noise of a SAW with the frequency stability of an external reference. The result is a family of designs that have excellent vibration sensitivity, low phase noise performance which are available in standard and custom frequencies. Phase Locked Voltage Controlled SAW Oscillators Model Number Center Frequency (MHz) Lock Range (ppm) Reference Frequency (MHz) MN745-0400 MN745-0500 MN745-0625 MN745-0640 MN745-1250 MN745-1675 MN745-1687 MN745-2488 MN745-2500 MN745-3350 MN745-3375 400 500 625 625 1250 1675 1687 2488 2500 3350 3375 +/- 100 +/- 100 +/- 100 +/- 100 +/- 100 +/- 100 +/- 100 +/- 100 +/- 100 +/- 100 +/- 100 10 10 10 10 10 10 10 10 10 10 10 SSB Phase Noise (dBc/Hz) 10 Hz -65 -65 -65 -65 -60 -60 -60 -56 -56 -54 -54 100 Hz -95 -95 -95 -95 -88 -88 -88 -83 -83 -81 -81 1 kHz -115 -115 -115 -115 -110 -110 -110 -105 -105 -103 -103 10 kHz -115 -115 -115 -115 -110 -110 -110 -105 -105 -103 -103 Supply (Volts/mA) 100 kHz -140 -140 -140 -140 -134 -134 -134 -129 -129 -127 -127 1 MHz -155 -155 -155 -155 -149 -149 -149 -143 -143 -141 -141 8/90 8/90 8/90 8/110 8/120 8/120 8/120 8/120 8/120 8/120 8/120 | High Performance | Exceptional performance coupled with high reliability is what differentiates API SAW Oscillators from other vendors. Our engineers continue to push the technology envelope in order to provide our customers with standard and custom designs that meet specifications and exceed expectations. Raising The Bar Exceptional phase noise performance is the cornerstone of most SAW based Excellent close-in phase noise performance oscillator requirements. Using a number of proprietary methods including low noise bipolar amplifiers, -165 dBc/Hz low noise voltage regulators and low loss SAW designs, we have raised the industry's bar for SAW oscillator performance. Linear Tuning Ranges By using a SAW with a conventional phase shifter, API oscillators achieve a high tuning linearity. MN725-400.000 Frequency vs. Vt 400.15 MHz 400.10 MHz MHz 400.05 MHz 400.00 MHz 399.95 MHz 399.90 MHz 399.85 MHz 0 Volts 0.5 Volts 1 Volts 1.5 Volts 2 Volts 2.5 Volts 3 Volts Volts 3.5 Volts 4 Volts 4.5 Volts 5 Volts Integral Varactor diodes clean up filters in quadrature allow like this 7 pole for linear tuning LC design beyond traditional SAW oscillator designs Available X2 or X4 multipliers extend frequency performance to 4000 MHz Embedded microcontrollers load critical parameters during powerA pair of up and then enter parallel voltage a low-noise state to regulators are eliminate spurious designed in products for multiple bias flexibility Many of our SAW phase-lock oscillators provide fail-safe measures like the lock detect circuitry which alarms when loss of lock occurs We use Ultra Low Noise bipolar transistors for improved output power without sacrificing performance | High Reliability | API’s SAW oscillators are manufactured for integration into both commercial and military applications. Our oscillators are available with screening to test methods of MIL-STD-883, MIL-STD-202 and MILSTD-810 in strict compliance with our ISO9001:2001 certified facility. Seam Sealing API Technologies' inventory of sealing methods includes seam sealing which maintains environmental integrity to pass the rigors of MIL-PRF-38534 methods 1014 conditions A & C for both Gross and Fine leak detection. Constant Acceleration API offers constant acceleration in compliance with MIL-STD-883, Test Method 2001 for our SAW oscillator products. Vibration Testing On-site random and sinusoidal vibration to 30g, along with shock testing allow our engineers to test their designs under extreme conditions. 100% Testing Our SAW oscillators undergo rigorous testing for phase noise, harmonic and sub-harmonic suppression, output signal power level and tuning linearity following any environmental screening. The units are tested at the operating temperatures which assures compliance to specifications under all environmental conditions. Temperature Cycling We cycle our SAW oscillators from -55 to +100°C in compliance with MIL-STD-883, Test Method 1010 Cond. A Stability Bake All our oscillators receive a 96 hour stability bake at 100°C to provide optimal stability. We also can provide an active burn-in for the oscillators. 0.895 x 0.495 8 Pin DIP Package 0.970 x 0.510 8 Pin DIP Package 1.27 x 0.77 8 Pin DIP Package 1.00 x 1.00 16 Pin Flatpack Package 1.50 x 1.00 Surface Mount Package 1.520 x 1.010 8 Pin DIP Package Quality Assurance ü Certified to ISO 9001:2001 and AS9100-B control system compliant to ü Quality MIL-I-45208 and MIL-Q-9858 ü ANSI/Z540-1-1994 compliant calibration available to the test methods of ü Screening MIL-STD-883, MIL-STD-202 and MIL-STD-810 | Design Resources | micro.apitech.com API Technologies’ website features complete information on all standard products with updated versions of more than 900 product datasheets. API’s customers enjoy FREE engineering tools, tours, application notes, white papers, and the ability to create a custom designed product per individual specifications. Cascade Design Suite With over 750 datasheets on API Technologies’ Amplifiers, Mixers, Oscillators & Control Products, this CD also offers the industry’s best manufacturer’s cross reference. The System Simulator lets you optimize your design by viewing an individual component’s contribution to overall system performance. You can also quickly evaluate trade-offs in component selection and their impact on system performance (e.g. Gain, Noise, P1dB, IP3, Dynamic Range,......) API Technologies Corp. is a trusted provider of RF/microwave, microelectronics, and security solutions for critical and high-reliability applications. The company designs, develops and manufactures electronic components, modules, systems and products for technically demanding defense, commercial/industrial and aerospace applications. API Technologies’ customers include many leading Fortune 500 companies, as well as a majority of NATO governments. While API was founded in 1981, our heritage brands have served the demanding, hi-rel marketplace for more than 60 years. API Technologies trades on the NASDAQ under the symbol ATNY. www.apitech.com . +1.855.294.3800