Best-in-industry performance Radar Communication Electronic Counter Measures Laboratory Instrumentation Commercial and military products YIG Filters and Oscillators YIG Products from Teledyne Microwave Solutions (TMS) Teledyne Microwave Solutions YIG Products (formerly Ferretec Products) has a long history of supplying YIG products and is known as the industry’s Leading Supplier. Teledyne Microwave Solution’s YIG products supplies both closed-and open-loop YIG filters, YIG Oscillators, YIG-tuned harmonic generators, and YIG-based integrated receiver frontends / tuners. Analog and digital drivers are available for all Ferretec YIG products. TMS’s YIG products combine advanced technology and state-of-the-art performance with sophisticated manufacturing techniques to ensure consistently high quality. The first product line from Ferretec Products was closed-loop YIG filters, trademarked FERRETRAC®. Customers include key U.S. defense contractors such as Lockheed-Sanders, ITT Avionics, Raytheon, General Dynamics, as well as international defense contractors and internationalbased companies. In 1984, Ferretec was awarded a contract by ITT Avionics to develop an integrated closed-loop receiver front-end for an update of the ALQ172 EW equipment on the B-52. TMS has extensive experience in the design, manufacture, and management of large military and commercial programs. Engineering expertise in the integration of microwave components with analog and digital control circuits, combined with a highly productive manufacturing organization, has resulted in the selection of Ferretec Products by major defense systems companies, both domestically and internationally for high-volume production programs. TMS products are organized to support government programs from the program management office through to the quality organization. QUALITY is not just a word or procedure, but rather the planned result of a Ferretec Products team committed to excellence and customer satisfaction. This results in commitment to our customers, at every level. From sales and engineering through manufacturing, quality is the responsibility of everyone within the Teledyne Microwave Solutions organization. teledynemicrowave.com • [email protected] Tel: 1.800.832.6869 or 1.650.691.9800 • Fax: 1.650.962.6845 YIG Filters & Oscillators YIG Bandpass Filters at-a-Glance • Multi-octave, wide dynamic range • 2, 4, and 7-stage designs • Dual channel 2+2 & 4+4 designs • Standard and wide bandwidth models • Temperature-compensated tuning • Available with analog or digital input drivers • MIL-SPEC & Commercial models YIG Band-Reject Filters at-a-Glance Tuning Range (GHz) 2 Stage F1051 0.5 to 2.0 F1053 6.0 to 18.0 F1055 2.0 to 18.0 F1056 8.0 to 26.5 F1057 20.0 to 40.0 4 Stage F1071 0.5 to 2.0 F1073 6.0 to 18.0 F1075 2.0 to 18.0 F1076 8.0 to 26.5 F1077 20.0 to 40.0 F2000 3.0 to 50.0 6/7 Stage F1080 0.5 to 2.0 F1082 6.0 to 18.0 F1084 2.0 to 18.0 F1085 3.0 to 26.5 4 Stage F1091 0.5 to 2.0 F1093 2.0 to 6.0 F1095 2.0 to 18.0 F1096 8.0 to 26.5 F1097 6.0 to 18.0 F1098 8.0 to 18.0 F1099 8.0 to 18.0 7 Stage F1200 8.0 to 18.0 F1201 6.0 to 18.0 2+2 (1) F3270C 2.0 to 18.0 4+4 (1) F3271C 2.0 to 18.0 (1) All Specs per channel Model No. band-reject filters (BRFs) break through conventional size, insertion loss, specification and reliability barriers. Our designs allows wideband notch filter tuning over the 4-18 GHz range in a single unit. • Ability to meet deep and wide notch bandwidth specifications while maintaining narrow 3dB bandwidths • Reduction in spurious (typically on the order of 2dB) and increase in selectivity, notch depth and bandwidth • Excellent Linearity • Reduced Package sizes Spur/Ripple (dB, max.) 1.5 1.5 1.5 2.0 2.0 1.5 1.5 1.5 2.0 2.0 2.0 1.0 1.5 2.0 2.0 2.0 2.0 2.0 2.0 2.5 2.0 2.5 2.5 2.5 2.0 2.0 ORI (dB, min) 45 50 45 40 35 70 80 80 60 60 60 80 100 100 80 70 70 65 70 60 70 60 85 85 45 60 ORS (dB, min) 25 30 25 30 25 50 50 40 40 30 40 60 60 50 60 40 40 40 40 40 40 40 65 65 25 60 BANDBand REJECT FILTERS Reject Filters Passband Insertion Passband −40dB 3dB BW ORS Range Loss VSWR Rejection BW (MHz, max) (dB, max) (GHz) (dB, max) (dB, min) (MHz, min) 7 Stage F1016 0.5 to 1.0 5 140 1.75 2.0:1 4.0 DC to 1.0 F1017 1.0 to 2.0 5 140 1.75 2.0:1 4.0 DC to 2.0 F1300 0.5 to 2.0 3 150 1.5 2.0:1 4.0 DC to 2.0 10 Stage F1323 8.0 to 18.0 35 150 1.5 2.0:1 4.0 DC to 18.0 F1322 6.0 to 18.0 25 150 1.5 2.0:1 4.0 DC to 18.0 F1321 4.0 to 18.0 10 150 1.5 2.0:1 4.0 DC to 18.0 12 Stage F1310 2.0 to 6.0 15 125 1.5 2.0:1 4.0 DC to 6.0 F1311 2.0 to 8.0 15 150 1.5 2.0:1 4.0 DC to 6.0 1274 Terra Bella Avenue Mountain View, CA 94043F1312 2.0 to 12.0 10 150 1.5 2.0:1 4.0 DC to 12.0 16 Stage F1333 8.0 to 18.0 50 150 1.75 2.0:1 4.0 DC to 18.0 TMS announces a new line of YIG with our patent F1332 6.0Tuned to 18.0 Band Reject 40 Filters, designed 150 1.75 2.0:1pending 4.0technology, DC to 18.0 4.0 to 18.0 to 18GHz. 25 This technology 150 1.75unparalleled 2.0:1 performance 4.0 DC to 18.0 covering the frequencyF1331 range of 125MHZ provides anywhere Advanced BRF Solutions the industry. F1334 8.9 to 9.6 2.0:1 4.0 DC to 12.0 Super Notch 16 Stage 70 @ −70dB Tuning Range (GHz) Model No. TMS’s “Advanced Technology” BANDPASS FILTERS Bandpass Filters 3dB BW Insertion Loss (MHz, min.) (dB, max.) 20 4.0 25 3.0 25 4.0 40 4.0 50 5.0 20 7.0 25 4.5 25 6.0 40 6.0 50 8.0 40 7.0 (3-6 GHz) 6.0 (6-50 GHz) 25 7.0 90 6.0 50 7.0 25 7.0 25 6.0 70 5.0 50 6.0 80 7.0 450 6.0 250 6.0 500 6.0 500 7.0 500 8.0 30 4.0 30 6.0 Integrated BRF/BPF F1400 • Increased and notch depth 150 at lower frequencies vs. standard4.0 band 10 Stage BRFminimum rejection 5.0bandwidths to 10.0 20 @ −50dB 2.0 2.0:1 N/A 4 Stage BPF to 10.0 N/A 20 (min) 5.0 • A reduction in the maximum5.03dB bandwidth at higher frequencies vs. standard band reject −60dB filters Dual 8 Stage BRF F1401 •Single No increase Channel in spurious responses 4.5 to 18.0across the10band 150 2.0 2.0:1 4.0 Dual Channel 4.5 to 18.0 20 150 3.5 3.5:1 5.0 reject DC to filters 10.0 • Higher Frequency Bands available up to 20GHz N/A DC to 18.0 DC to 18.0 RF Parameters Frequency Range, Passband Passband Insertion Loss Passband Return Loss Minimum 40dB Rejection Bandwidth Maximum 3dB Notch Bandwidth Maximum Notch Tracking Spur Amplitude Temperature Drift, +0 to +70°C Input Power, Minimum (dBm) Model Frequency Range, Notch (MHz) (MHz) (dB) (dB) (MHz) (MHz) (dB) (MHz) F3750 125-500 110-575 ≤1.5 ≥10 4 75 3 5 0 F3751 250-1500 220-1600 ≤1.5 ≥10 4 110 3 5 +3 F3752 500-2000 400-3000 ≤1.5 ≥10 6 50 3 10 +5 F3753 500-2600 400-3000 ≤1.5 ≥10 6 70 3 10 +5 F3754 2000-6000 1800-18200 ≤1.6 ≥10 20 125 4 10 +10 F3755 2000-18000 1800-18200 ≤1.6 ≥10 12 125 4 20 +10 teledynemicrowave.com • [email protected] Tel: 1.800.832.6869 or 1.650.691.9800 • Fax: 1.650.962.6845 in YIG Filters & Oscillators YIG Oscillators at-a-Glance • Flat power output over temperature YIG Oscillators YIG OSCILLATORS Model No. Tuning Range (GHz) Power Output (dBm min) FS1062 2.0 to 8.0 14 FS1064 2.0 to 4.0 FS1066 Temp Drift (MHz max) Commercial YIG Tuned Oscillators ±2.5 15 −12 Variation (dB max) Harmonics (dBc max) 14 ±2.0 −12 15 4.0 to 8.0 14 ±2.0 −12 20 Tuning Linearity (% max) Hysteresis (MHz max) Phase Noise at 100KHz (dBc/Hz) ±0.15 8 −120 ±0.1 2 −120 ±0.1 4 −120 2.0 to 6.0 13 ±2.0 −12 15 ±0.1 2 −125 FS2637 8.0 to18.0 13 ±3.0 −12 30 ±0.15 12 −125 FS2692 6.0 to 13.0 13 ±2.5 −12 30 ±0.25 10 −125 FS2678 12.0 to 20.0 10 ±4.0 −12 30 ±0.15 12 −125 FS2722 2.0 to 18.0 13 ±3.5 −10 30 ±0.15 15 −123 FS2788 2.0 to 20.0 8 −110 • Excellent Linearity FS1022 2.0 to 8.0 14 FS1043 2.0 to 6.0 14 ±2.0 FS2950 3.0 to 6.0 13 ±2.0 • Internal amplifier stages provide high output power for test applications FS3013 3.0 to 7.0 13 FS2705 2.0 to 6.0 12 FS2706 2.0 to 8.0 FS2707 2.0 to 10.0 FS1036 • Reduced package sizes (surface mount, 1” & 1.25”) • Multi-octave tuning • Temperature-compensated tuning • Analog or digital drivers FS1068 ±4.0 −8 1" Cube Series or 0.5" PCB Mount ±2.0 −12 30 ±0.15 20 20 ±0.1 8 −120 −12 15 ±0.08 6 −120 −12 10 ±0.1 3 −125 ±2.0 −12 1.25" Cube Series 10 ±0.1 3 −125 ±2.0 −12 15 ±0.15 8 12 ±2.5 −12 15 ±0.15 8 12 ±2.5 −12 15 ±0.15 8 5.0 to 18.0 10 ±4.0 −10 20 ±0.075 12 FS1034 6.0 to 18.0 13 ±3.0 −12 30 ±0.075 12 FS1035 8.0 to 18.0 13 ±0.075 10 2.0 to 10.0 15 ±3.5 −12 2" Cylindrical Series ±2.0 −12 20 FS1001 15 ±0.15 8 FS1012 6.0 to 18.0 16 ±2.5 −12 20 ±0.075 12 FS1014 4.0 to 18.0 12 ±2.5 −12 30 ±0.075 14 Consult Factory Consult Factory YIG Sub-Systems at-a-Glance Teledyne Microwave capitalizes on its expertise in microwave switch, attenuator, amplifier and oscillator technologies to provide high performance subassemblies and super-components. Partnering closely with our customers, we continually develop various integrated subsystems from low level module designs such as digital attenuators and switch assemblies to highly integrated subsystems found in many custom applications. teledynemicrowave.com • [email protected] Tel: 1.800.832.6869 or 1.650.691.9800 • Fax: 1.650.962.6845 YIG Filters & Oscillators TINYIG Oscillators The smallest available oscillator in the industry, Teledyne Microwave Solution’s TINYIG is an ultra-low phase noise YIG-tuned oscillator (YTO) that provides superior phase noise frequency up to 20 GHz. Uniquely designed to be RoHS compliant, these YIG TO-8 oscillators exploit the principle of magnetic resonance to generate a clean, low phase noise microwave signal over broad tuning ranges. It can greatly simplify system designs, thus reducing costs, eliminating the need for extra components, and reducing the risk of malfunctions of complicated electronic connections and operations. TINYIG Oscillators at-a-Glance TINY Oscillators IG TINYig OSCILLATORS TUNING RANGE (GHz) FS2830R FS2800R FS2772R FS2899R FS2897R FS2898R FS2900R FS3005R 3.0-6.0 3.0-8.0 4.0-8.0 5.0-10.0 7.0-11.0 6.0-13.0 8.0-16.0 10.0-20.5 •Smallest oscillator available in the RF and microwave industry Power Output (dBm) +6 +6 +6 +6 +5 +4 +3 +3 Power Output Variation, max (dB) +5 +6 +4 +4 +7 +7 +7 +7 •Up to 20 GHz: 3 to 8, 8 to 16, and 10 to 20 GHz (other custom bands upon request) Harmonics (dBc, max) 12 12 12 12 12 12 12 12 Non-Harmonic Spurious (dBc, max) PHASE NOISE dBc/Hz 70 70 70 70 70 70 70 70 @100KHz offset min. 125 128 100 125 128 100 125 130 100 125 128 100 125 128 100 125 128 100 123 125 98 118 121 93 ±45 ±45 ±45 ±50 ±50 ±50 ±60 ±60 ±2 15 ±2 15 ±2 15 ±10 15 ±20 25 ±20 25 ±45 60 ±35 60 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 8 7 10 8 7 10 8 7 10 8 7 10 9 6 9 12 7 10 12 10 25 11 Sensitivity (KHz/mA, typ) 300 300 300 300 300 350 300 350 3 dB Bandwidth (KHz, typ) 400 1.0 1.0 400 1.0 1.0 400 1.0 1.0 400 1.0 1.0 400 1.0 1.0 400 1.0 1.0 400 1.0 1.0 400 1.0 1.0 70 20 70 20 70 20 70 20 70 N/A 70 N/A 70 N/A 70 N/A •Permanent Magnet (PM) •Surface Mount or PCB •RoHS Compliant •Provides designers broader frequency tuning coverage to replace multiple VCOs @100KHz offset typ. @10KHz offset min. Temperature Drift (MHz, max) (0 to 60°C) Tuninq Linearity (MHz, max) Hysteresis (MHz, max) Frequency Pushing (MHz/V, max) Frequency Pulling (1.5:1 VSWR, max) TUNING COIL Sensitivity (MHz/mA) ±10% Resistance (ohms, max) Inductance (mH, max) 11 30 OPTIONAL FM COIL Resistance (ohms, typ) Inductance (uH, typ) BIAS CURRENT +5 or 8 Volts (mA, max) 5 Volts (mA, max) OUTLINE PCB Surface Mount 1305981 1305981 1305981 1305981 IN-051697 IN-051698 IN-051699 IN-051699 IN-050088 IN-050088 IN-050088 IN-050088 IN-051696 IN-051544 IN-051684 IN-051684 Available in PCB or Surface Mount, FSXXXXR-PCB or FSXXXXR-SMT. FM Coil Modulation BW available up to 2MHz. Other Frequency bands available upon request. teledynemicrowave.com • [email protected] Tel: 1.800.832.6869 or 1.650.691.9800 • Fax: 1.650.962.6845 TELEDYNE MICROWAVE SOLUTIONS Everywhereyoulook TM 1274 Terra Bella Avenue, Mountain View, CA 94043 1.800.832.6869 or 1.650.691.9800 • Fax 1.650.962.6845 teledynemicrowave.com • [email protected] YIGF&O_05-11-15