Catalog

Plastic Film Capacitors
Metallized Polypropylene Film Capacitor
Type:
ECWH(C)
Designed for high frequency and pulse applications.
■Features
•Excellent electrical characteristics
•Low loss
•Flame-retardant epoxy resin coating
•RoHS directive compliant
■Recommended Applications
•General resonance circuit (630 VDC)
•Resonance circuits for microwave oven and IH cooker (630 VDC)
•Resonance circuits for microwave oven (630 VDC, 1250 VDC)
•General high voltage circuit (3000 VDC)
■Explanation of Part Numbers (630 VDC)
1
2
3
4
E
C
W
H
Product code
Dielectric &
construction
5
6
7
8
9
10
11
C
Rated
voltage
Capacitance
Cap. Tol. Suffix
H
±3 %
6 630VDC
Suffix
Lead Form
Straight
Cut lead
Suffix
Blank
C
■Explanation of Part Number for Odd Size Taping (630 VDC)
E
C
Product code
W
H
Dielectric &
construction
R
Rated
voltage
Capacitance
C
Ammo Cap.tol
7.5mm
Suffix
■Explanation of Part Numbers (1250 VDC)
1
2
3
4
5
6
7
E
C
W
H
C
3
B
Product code
Dielectric &
construction
8
Rated
voltage
9
10
Capacitance
3B 1250VDC
12
J
A
Cap. Tol. Suffix
Suffix
A
±5 %
J
11
Lead Form
Cut lead
■Explanation of Part Numbers (3000 VDC)
1
2
3
4
5
6
7
E
C
W
H
C
3
F
Product code
Dielectric &
construction
8
10
11
12
J
Rated
voltage
3F 3000VDC
9
Capacitance
J
±5 %
Cap. Tol. Suffix
Suffix
Blank
C
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
− FC70 −
Lead Form
Straight
Cut lead
Plastic Film Capacitors
■Specifications
–40 ˚C to 105 ˚C : General resonance circuit
–40 ˚C to 85 ˚C : When using compulsive air cooling for a resonance circuit
Category temp. range
–40 ˚C to 105 ˚C : General resonance circuit
(Including temperature-rise on unit surface) 1250 VDC
–40 ˚C to 85 ˚C : When using compulsive air cooling for a resonance circuit
3000 VDC –40 ˚C to 85 ˚C : General high voltage circuit
630 VDC, 1250 VDC, 3000 VDC
Rated voltage
630 VDC
Capacitance range
Capacitance tolerance
630 VDC
0.10 µF to 0.33 µF
1250 VDC
0.08 µF to 0.12 µF
3000 VDC
630 VDC
0.0024 µF to 0.01 µF
±3 %(H)
1250 VDC
±5 %(J)
3000 VDC
±5 %(J)
630 VDC
1250 VDC
Dissipation factor (tan )
3000 VDC
Withstand voltage
tanδ≦0.05 % (20 ˚C,1 kHz), tanδ≦0.1 % (20 ˚C,10 kHz)
tanδ≦0.1 % (20 ˚C,1 kHz), tanδ≦0.1 % (20 ˚C,10 kHz)
Insulation resistance (IR)
3000 VDC
IR≧50000 MΩ (20 ℃, 500 VDC, 60 s)
❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
■Dimensions in mm (not to scale)
C
Cut lead
A
G max.
Cut lead
Copper wire or copper-clad steel wire
■Packaging Specifications for Bulk Package
Packing quantity : 100 pcs./bag
■Taping Specifications for Automatic Insertion
● Taping style
❈Refer to the page of taping specifications.
● Packaging Specifications
Type
Rated volt.
Cap. range
(µF)
ECWH(C)
630 VDC
0.10 to 0.33
■Lead Spacing
Taping style
AD AS
B
C
D
E
○
Packing
Ammo
❈See the column “Rating, Dimensions & Quantity Box ” for packing quantity.
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
− FC71 −
Style
E
Lead Spacing
7.5 mm
Metallized Film
Between terminals : Rated volt. (VDC)×150 % 60 s
630 VDC
IR≧9000 MΩ (20 ℃, 500 VDC, 60 s)
1250 VDC
Plastic Film Capacitors
■Rating & Dimensions
●Rated voltage : 630 VDC Capacitance tolerance : ±3 %(H)
Dimensions (mm)
Part No.
ECWH6104HC(
ECWH6114HC(
ECWH6124HC(
ECWH6184HC(
ECWH6214HC(
ECWH6244HC(
ECWH6274HC(
ECWH6284HC(
ECWH6304HC(
ECWH6324HC(
ECWH6334HC(
)
)
)
)
)
)
)
)
)
)
)
↑
Min. order Q'ty
Cap
(µF)
L max
T max
H max.
F
G max.
φd
Taping
0.10
0.11
0.12
0.18
0.21
0.24
0.27
0.28
0.30
0.32
0.33
20.7
20.7
20.7
20.7
20.7
20.7
20.7
20.7
20.7
20.7
20.7
8.6
9.0
9.4
11.5
12.4
13.2
14.0
14.3
14.8
14.5
14.7
13.5
13.9
14.3
16.3
17.2
18.1
18.9
19.1
19.6
20.9
21.1
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
350
Bulk
7.5 mm
300
1000
250
200
700
Suffix for lead form
●Rated voltage : 1250 VDC Capacitance tolerance : ±5 %(J)
Dimensions (mm)
Min. order Q'ty
Part No.
Cap
(µF)
L max
T max
H max.
F
G max.
φd
ECWHC3B803JA
ECWHC3B104JA
ECWHC3B114JA
ECWHC3B124JA
0.08
0.10
0.11
0.12
20.7
20.7
20.7
20.7
12.0
13.5
14.2
14.9
19.0
20.6
21.3
21.9
17.5
17.5
17.5
17.5
1.5
1.5
1.5
1.5
0.8
0.8
0.8
0.8
Bulk
700
600
●Rated voltage : 3000 VDC Capacitance tolerance : ±5 %(J)
Dimensions (mm)
Part No.
ECWHC3F242J(
ECWHC3F362J(
ECWHC3F392J(
ECWHC3F432J(
ECWHC3F562J(
ECWHC3F822J(
ECWHC3F103J(
↑
)
)
)
)
)
)
)
Min. order Q'ty
Cap
(µF)
L max
T max
H max.
F
G max.
φd
Bulk
0.0024
0.0036
0.0039
0.0043
0.0056
0.0082
0.01
25.8
25.8
25.8
25.8
25.8
25.8
25.8
6.1
7.2
7.5
6.5
7.3
7.5
8.2
10.9
11.9
12.2
11.2
12.0
15.3
16.1
22.5
22.5
22.5
22.5
22.5
22.5
22.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1000
Suffix for lead form
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
− FC72 −
ECWH (C) DC630V series
(Metallized Polypropylene Film)
Electrical Characteristics <Typical Data >
Temperature Characteristics
at 1kHz
10
Capacitance change(%)
Capacitance change(%)
10
5
0
0.33uF
0.18uF
0.10uF
-5
-10
Frequency Characteristics
0.33uF
0.18uF
5
0.10uF
0
-5
-10
-40
-20
0
20
40
60
80
100
1
10
Temperature(℃)
at 1kHz
0.4
0.3
0.2
0.33uF
0.18uF
0.10uF
0.1
-20
0
20
40
60
80
0.33uF
0.18uF
0.10uF
0
100
1
10
Temperature(℃)
at DC100V
100000
Insulation resistance(ohm)
1.E+13
Impedance(ohm)
1.E+12
1.E+11
0.10u
0.18u
0.33uF
1.E+09
1.E+08
100
1000
Frequency(kHz)
10000
0.10uF
0.18uF
0.33uF
10000
1.E+10
10000
1
0
-40
1000
2
Dissipation factor(%)
Dissipation factor(%)
0.5
100
Frequency(kHz)
1000
100
10
1
0.1
0.01
0.001
1.E+07
-40
-20
0
20
40
60
80
Temperature(℃)
100
1
10
100
1000
Frequency(kHz)
10000
(Metallized Polypropylene Film)
Applicable Specifications<Typical Data >
ECWH (C) DC630V series
Permissible Current
Derating
by Temperature
Permissible
Voltage
Permissible Current
Effective
value (Vrms)
Percentage to
the permissible
current (%)
12.0
0.33uF
0.32uF
0.30uF
0.28uF
0.21uF
0.18uF
8.0
6.0
0.12uF
0.10uF
4.0
2.0
0.10uF to 0.33uF
80
60
40
20
0
0.0
10
100
-40
1000
Frequency(kHz)
Pulse Handling Capability (dv/dt)
DC
630V
Capacitance
(μF)
Code
0.100
104
50
0.110
114
55
0.120
0.180
124
184
60
90
0.210
0.240
214
244
105
120
0.270
0.280
0.300
274
284
304
135
140
150
0.320
324
160
0.330
334
165
dV/dt
(V/μs)
500
0
20
40
60
80
100 120
Voltage Derating by Temperature
(Max 10000cycles)
Rated
Voltage
-20
Temperature of capacitor surface (℃)
Current
(A0-P)
Percentage to the rated voltage (%)
Effective value (Arms)
10.0
100
110
100
0.10uF to 0.33uF
90
80
70
60
50
-40 -20
0
20
40
60
80 100 120
Temperature of capacitor surface (℃)
*Please consult Panasonic if your condition exceeds the above
*P When you use this product, peak voltage must not exceed DC rated voltage.
*The current(0-P) value is calculated using nominal capacitance.
ECWH(C)
DC1250V series
(Metallized Polypropylene Film)
Electrical Characteristics <Typical Data >
Temperature Characteristics
at 1kHz
10
Capacitance change(%)
Capacitance change(%)
10
5
0.12uF
0.10uF
0.08uF
0
-5
-10
Frequency Characteristics
5
0.08uF
0.10uF
0.12uF
0
-5
-10
-40
-20
0
20
40
60
80
1
100
10
Temperature(℃)
at 1kHz
0.4
0.3
0.2
0.1
0.12uF
0.10uF
0.08uF
0
-40
-20
0
20
40
60
80
0.12uF
0.10uF
0.08uF
0
100
at DC500V
1
10
100
1000
Frequency(kHz)
10000
100000
0.08uF
1.E+12
1.E+11
0.10uF
0.12uF
1.E+10
1.E+09
1.E+08
10000
Impedance(ohm)
Insulation resistance(ohm)
10000
1
Temperature(℃)
1.E+13
1000
2
Dissipation factor(%)
Dissipation factor(%)
0.5
100
Frequency(kHz)
1000
100
0.08uF
0.10uF
0.12uF
10
1
0.1
0.01
0.001
1.E+07
-40
-20
0
20
40
60
80
Temperature(℃)
100
1
10
100
1000
Frequency(kHz)
10000
ECWH(C)
DC1250V series
(Metallized Polypropylene Film)
Applicable Specifications <Typical Data >
PermissiblePermissible
Current Derating
by Temperatur
Voltage
Permissible Current
Percentage to the permissible current (%)
10.0
9.0
0.12uF
0.10uF
0.08uF
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.08uF to 0.12uF
80
60
40
20
0
0.0
10
100
-40
1000
Frequency(kHz)
-20
0
20
40
60
80
100 120
Temperature of capacitor surface (℃)
Pulse Handling Capability (dv/dt)
Voltage Derating by Temperature
(Max 10000cycles)
110
Rated
Voltage
Capacitance
(μF)
0.080
DC1250V
dV/dt
Code
(V/μs)
803
625
Current
(A0-P)
50
0.100
104
500
50
0.110
114
500
55
0.120
124
500
60
Percentage to the rated voltage (%)
Effective value (Arms)
8.0
100
100
0.08uF to 0.12uF
90
80
70
60
50
-40 -20
0
20
40
60
80 100 120
Temperature of capacitor surface (℃)
*Please consult Panasonic if your condition exceeds the above
*P When you use this product, peak voltage must not exceed DC rated voltage.
*The current(0-P) value is calculated using nominal capacitance.
ECWHC Type DC3000V series（Metallized Polypropylene Film）
Electrical Characteristics <Typical Data >
Temperature Characteristics
at 1kHz
10
5
Capacitance change(%)
Capacitance change(%)
10
0.01uF
0.0082uF
0.0043uF
0.0024uF
0
0.01uF
0.0082uF
0.0043uF
0.0024uF
5
0
-5
-5
-10
Frequency Characteristics
-40
-20
0
20
40
60
80
100
-10
1
10
Temperature(℃)
at 1kHz
0.4
0.3
0.2
0.01uF
0.0082uF
0.0043uF
0.0024uF
0.1
0
-40
-20
10000
0
20
40
60
80
1
0
100
0.01uF
0.0082uF
0.0043uF
0.0024uF
1
10
Temperature(℃)
at DC500V
100
1000
Frequency(kHz)
10000
100000
Insulation resistance(ohm)
10000
1.E+12
0.01uF
0.0082uF
0.0043uF
0.0024uF
1.E+11
1.E+10
Impedance(ohm)
1.E+13
1000
2
Dissipation factor(%)
Dissipation factor(%)
0.5
100
Frequency(kHz)
1.E+09
1.E+08
0.0024uF
0.0043uF
0.0082uF
0.01uF
1000
100
10
1
0.1
0.01
0.001
1.E+07
-40
-20
0
20
40
60
80
Temperature(℃)
100
1
10
100
1000
Frequency(kHz)
10000
ECWHC Type DC3000V series（Metallized Polypropylene Film）
Applicable Specifications
PermissiblePermissible
Current Derating
by Temperatur
Voltage
Permissible Current
Percentage to the permissible current (%)
Effective value (Vrms)
3.0
100
0.01uF
0.0082u
2.0
1.5
0.0043u
0.0024u
1.0
0.5
0.0
0.01uF to 0.047uF
80
60
40
20
0
10
100
-40
1000
Frequency(kHz)
-20
0
20
40
60
80
100 120
Temperature of capacitor surface (℃)
Pulse Handling Capability (dv/dt)
Voltage Derating by Temperature
(Max 10000cycles)
110
Rated
Voltage
Capacitance
(μF)
0.0024
DC
3000V
dV/dt
Code
(V/μs)
242
Current
(A0-P)
4.8
0.0036
362
7.2
0.0039
392
7.8
0.0043
432 2000
8.6
0.0056
562
11.2
0.0082
822
16.4
0.0100
103
20.0
Percentage to the rated voltage (%)
Effective value (Arms)
2.5
100
0.01uF to 0.047uF
90
80
70
60
50
-40 -20
0
20
40
60
80 100 120
Temperature of capacitor surface (℃)
*Please consult Panasonic if your condition exceeds the above
*P When you use this product, peak voltage must not exceed DC rated voltage.
*The current(0-P) value is calculated using nominal capacitance.