Catalog - Panasonic

Electric Double Layer Capacitors (Gold Capacitor)/ HW
Radial lead Type
Series:
HW
■ Features
● Can be discharged mA or more current.
● RoHS directive compliant
■ Recommended Applications
● Solar battery operated circuits (Road guidance flasher),
Quick charging motor drives (Toy car)
● Back-up Power Supplies (UPS)
■ Specifications
Category Temp. Range
Maximum Operating Voltage
Nominal Cap. Range
Characteristics at Low
Temperature
–25 °C to +70 °C
–25 °C to +60 °C
2.3 V.DC
2.3 V.DC
2.1 V.DC
22 F
30, 50 F
70 F
Capacitance change ±30 % of initial measured value at +20 °C (at –25 °C)
Internal resistance
<4 times of initial measured value at +20 °C (at –25 °C)
After 1000 hours application of 2.3 V. DC at +70 °C (+60 °C), the capacitor shall meet the
following limits.
Endurance
Capacitance change
Internal resistance
±30 % of initial measured value
<2 time of initial specified value
After 1000 hours storage at +70 °C (+60 °C) without load, the capacitor shall meet the
specified limits for Endurance.
Shelf Life
■ Dimensions in mm(not to scale)
Sleeve
(Unit : mm)
0d±0.05
P±0.5
(8.0 mm dia.)
Vent
L+2 max.
■ Standard Products
(V.DC)
–25 to +70
2.3
–25 to +60
2.1
0D+0.5 max.
3 min.
L
35.0
0d
0.8
P
7.5
18.0
35.0
0.8
7.5
18.0
40.0
0.8
7.5
18.0
50.0
0.8
7.5
✽ : 10 F or less HW series is not recommended for new design. Please consider HZ series.
Category Maximum
temp.
operating Capacitance
voltage
range
(°C)
14 min.
0D
18.0
Capacitance
tolerance
Recommended
Internal
resistance
discharge
(Initial specified value)
current
(F)
(F)
(Ω) at 1 kHz
(A)
22
17.6 to 30.8
< 0.1
1 or less
30
24.0 to 42.0
< 0.1
50
40.0 to 70.0
< 0.1
70
56.0 to 98.0
< 0.1
Min.
Mass
Packaging
(Reference
value)
Parts number
Q’ty
(g)
(pcs)
EECHW0D226
12.0
50
1 or less
EECHW0D306
14.0
50
1 or less
EECHW0D506
15.0
50
1 or less
EECHW0D706
19.0
50
Note : 1. Do not use reflow soldering. (IR, Atmosphere heating methods, etc. )
Please refer to the page of “Application Guidelines”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
– EEC-17 –
Oct. 2014