Power Inductors

Power Inductors
Power Choke Coil
for Automotive application
Series : PCC-D1413H (DUST)
Realize high heat resistance, low loss and high reliability
with dust core (DUST)
Industrial Property : patents 5 (Pending)
Features
● High
heat resistance
: Operation up to 150 °C
and small package : L×W×T=14.7×13.2×13.1 mm
● High-reliability
: High vibration resistance due to newly developed integral construction and severe
reliability condition of automotive application is covered
● High bias current
: Excellent inductance stability by using ferrous alloy magnetic material
● High Vibration proof
: 5 Hz to 2 kHz/30 G
● High efficiency
: Achieve by Low loss Dust core and Edgewise coil with rectangular wire
● AEC-Q200 qualified
● RoHS compliant
● SMD
Recommended Applications
● Driver
circuits of fuel injection systems in automotive, driver circuits of diesel common rail injection,
step-up power supplies for motor driver-circuits
Standard Packing Quantity
● 600
pcs./10 tray
Explanation of Part Numbers
1
2
3
4
E
T
Q
P
Product Code
5
6
7
8
H
Classification Height
9
10
11
12
Suffix
Size
D
Winding
Inductance
Core
Temperature rating
Operating temperature range
Storage condition
Tc : -40 °C to +150 °C(Including self-temperature rise)
After PWB mounting
Before PWB mounting
Ta : -5 °C to +35 °C 85%RH max.
Standard Parts
Inductance ✽1
Part No.
L0 at 0A
(µH)
ETQPDH240DTV
36.0±30%
L1 at 10A
(µH)
(24.0)
✽2
DCR
ACR
Rated Current ✽3
at 20 °C (mΩ)
at 20 kHz (mΩ)
△T=40K (A)
25.8 typ.
50.0 typ.
6.9
(✽1) Measured at 100 kHz.
(✽2) Reference Only.
(✽3) DC current which causes temperature rise of 40 K. Parts are soldered by reflow on four-layer PWB (1.6 mm FR4)
and measured at room temperature.
✽ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions.
This should be double checked in a worst case operation mode.
In normal case, the max. standard operating temperature of +150 °C should not be exceeded.
For higher operating temperature conditions, please contact Panasonic representative in your area.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01
Oct. 2014
Power Inductors
Performance Characteristics (Reference)
● Inductance
ETQPDH240DTV
100
90
40
80
35
70
30
60
ΔT(K)
45
25
50
20
40
15
30
10
20
5
10
0
Temperature vs DC Current
ETQPDH240DTV
(uH)
50
Inductance (µH)
● Case
vs DC Current
0
0
2
4
6
8
10
12
14
16
18
20
0
1
IDC (A)
2
3
4
5
6
7
8
9
10
IDC (A)
Dimensions in mm (not to scale)
Connection
Dimensional tolerance unless noted : ±0.5
P1
13.2±0.6
P2
13.1
5.9
2.45
6.7 min.
14.7
P2
10.53
Suffix
10.53
Date Code
2.45
Inductance
12.6
P1
✽ None polar character
Recommended land patterns in mm (not to scale)
Dimensional tolerance unless noted : ±0.5
1.9
Recommend
Resist opening area
8.4
20.6
5
4.4
Recommend
copper pad area
10.35
10.35
✽ Due to bigger part, Thermal Capacity is large and may
occure PWB temperature differences during reflow
process.
Recommended land pattern (Heat absorb) should be
designed with reflow mountablity.
■ As for Soldering Conditions and Safety Precautions
(Common precautions for Power Choke Coils for Automotive application),
Please see Data Files
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01
Oct. 2014
Power Inductors
Packaging Methods (Tray)
● Blister
Tray (mm) 60 pcs.
B
G
A
F
D
E
C
● Blister
Tray Dimention
Part No.
A
B
C
D
E
F
G
ETQPDH240DTV
152
262
23
14.8
15.1
19
18
Component Placement (Tray)
Terminals
Standard Packing Quantity/Tray
Part No.
Quantity
ETQPDH240DTV
600 pcs. /10 tray (60 pcs. /1 tray)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01
Oct. 2014