Aluminum (Radial Lead Type)

2015
CATALOG
Electrolytic Capacitors
（Radial Lead Type Aluminum Electrolytic Capacitors）
2015.7 industrial.panasonic.com/ww/products/capacitors
.
Aluminum Electrolytic Capacitors/ FC
Radial Lead Type
Series:
FC
Type:
A
■ Features
●
●
●
●
Endurance : 105 °C 1000 h to 5000 h
Low impedance
AEC-Q200 qualiﬁed ✽
RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
–55 °C to +105 °C
6.3 V.DC to 100 V.DC
2.2 μF to 15000 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
W.V. (V)
6.3
10
16
25
35
50
63
100
tan d
0.22
0.19
0.16
0.14
0.12
0.10
0.08
0.07
tan d
(120 Hz/+20 °C)
For capacitance value > 1000 μF, add 0.02 per every 1000 μF.
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum of DC
and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to
20 °C, the capacitors shall meet the limits speciﬁed bellow.
Duration : 04 to 06.3: 1000 hours, 08: 2000 hours , 010: 3000 hours , 012.5 to 018: 5000 hours
Endurance
Capacitance change
±20 % of initial measured value
tan d
< 200 % of initial speciﬁed value
DC leakage current
< initial speciﬁed value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits speciﬁed in Endurance. (With voltage treatment)
Shelf Life
■ Frequency correction factor for ripple current
W.V.(V.DC)
Frequency (Hz)
Cap (μF)
2.2 to
6.3 to 100
60
120
1k
10 k
100 k
330
0.55
0.65
0.85
0.90
1.00
390
to
1000
0.70
0.75
0.90
0.95
1.00
1200
to
2200
0.75
0.80
0.90
0.95
1.00
2700
to 15000
0.80
0.85
0.95
1.00
1.00
■ Dimensions in mm (not to scale)
fd±0.05
(Unit : mm)
Sleeve
Pressure relief
06.3
08
010
+
L=
14 min.
0D±0.5
3 min.
F±0.5
–
0D±0.5
=L16 : L±1.0 (=08L15, 016L15, 018L15 : L±1.5)
L20 : L±2.0
L>11
Body Dia. 0D
4
5
6.3
8
L=7
10
12.5
16
18
4
5
6.3
15 to 25 30 to 40
Body Length L
Lead Dia. 0d
0.45
0.5
0.5
0.6
0.6
0.6
0.8
0.8
0.8
0.45
0.45
0.45
Lead space F
1.5
2.0
2.5
3.5
5.0
5.0
5.0
7.5
7.5
1.5
2.0
2.5
✽ This product qualify for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
07 Jun. 2015
– EEE-63 –
Aluminum Electrolytic Capacitors/ FC
■ Case size/ Impedance/ Ripple Current
6.3 V to 35 V
W.V(V.DC)
Case size
(0D×L)
50 V
4
× 7
5
× 7
0.950
2.40
120
6.3 × 7
0.450
1.20
200
× 11
63 V
100 V
Ripple
Ripple
Ripple
Ripple
Impedance
Impedance
Impedance
Impedance
Current
Current
Current
Current
(Ω)/(100 kHz)
(Ω)/(100 kHz)
(Ω)/(100 kHz)
(Ω)/(100 kHz)
(mA r.m.s)
(mA r.m.s)
(mA r.m.s)
(mA r.m.s)
20 °C –10 °C /(100 kHz) 20 °C –10 °C /(100 kHz) 20 °C –10 °C /(100 kHz) 20 °C –10 °C /(100 kHz)
2.00
5.00
65
0.800
1.60
175
4.10
8.20
80
290
✽
260
145
0.700
✽
1.20
4.00
0.350
✽
0.600
2.00
6.3 × 11.2
1.00
2.00
240
1.80
3.60
114
8
× 11.5
0.117
0.234
555
0.234
0.468
485
0.342
0.684
405
0.680
1.36
260
5
8
× 15
0.085
0.170
730
0.155
0.310
635
0.230
0.460
535
0.450
0.900
340
8
× 20
0.065
0.130
995
0.120
0.240
860
0.178
0.356
690
0.330
0.660
455
10
× 12.5
0.090
0.180
755
0.162
0.324
615
0.256
0.512
535
0.530
1.06
306
10
× 16
0.068
0.136
1050
0.119
0.238
850
0.194
0.388
600
0.360
0.720
400
10
× 20
0.052
0.104
1220
0.090
0.180
1030
0.147
0.294
885
0.240
0.480
463
10
× 25
0.045
0.090
1440
0.082
0.164
1200
0.130
0.260
1050
0.210
0.420
599
10
698
× 30
0.035
0.070
1815
0.060
0.120
1610
0.090
0.180
1300
0.150
0.300
12.5 × 15
0.065
0.130
1205
0.110
0.220
1150
0.150
0.300
1020
0.230
0.460
511
12.5 × 20
0.038
0.076
1655
0.063
0.126
1480
0.085
0.170
1285
0.180
0.360
671
12.5 × 25
0.030
0.060
1945
0.050
0.100
1832
0.070
0.140
1720
0.110
0.220
807
12.5 × 30
0.025
0.050
2310
0.040
0.080
2215
0.055
0.110
2090
0.098
0.196
937
12.5 × 35
0.022
0.044
2510
0.034
0.068
2285
0.047
0.094
2265
0.087
0.174
1040
12.5 × 40
0.018
0.036
2655
0.030
0.060
2590
0.042
0.084
2560
0.072
0.144
1130
16
× 15
0.043
0.086
1690
0.080
0.160
1610
0.090
0.180
1410
0.140
0.280
793
16
× 20
0.029
0.058
2205
0.048
0.096
1835
0.059
0.118
1765
0.110
0.220
995
16
× 25
0.022
0.044
2555
0.034
0.068
2235
0.050
0.100
2160
0.089
0.178
1170
1520
16
× 31.5
0.018
0.036
3010
0.028
0.056
2700
0.043
0.086
2670
0.062
0.124
16
× 35.5
0.016
0.032
3150
0.025
0.050
2790
0.036
0.072
2770
0.053
0.106
1730
16
× 40
0.015
0.030
3360
0.023
0.046
2845
0.030
0.060
2825
0.047
0.094
1920
18
× 15
0.038
0.076
2000
0.068
0.136
1900
0.086
0.172
1690
0.120
0.240
917
18
× 20
0.028
0.056
2490
0.042
0.084
2420
0.055
0.110
2290
0.080
0.160
1230
18
× 25
0.020
0.040
2740
0.029
0.058
2610
0.043
0.086
2585
0.070
0.140
1420
18
× 31.5
0.016
0.032
3635
0.025
0.050
3000
0.032
0.064
2950
0.062
0.124
1600
18
18
× 35.5
× 40
0.015
0.014
0.030
0.028
3680
3735
0.023
–
0.046
–
3100
–
0.030
0.025
0.060
0.050
3095
3205
0.041
0.036
0.082
0.072
1770
2300
✽
Case size
(0D×L)
Capacitance
(μF)
5 × 11
1.0
2.2
3.3
4.7
10
12
15
18
22
Impedance (Ω)/(100 kHz)
20 °C
2.40
1.80
1.30
1.30
1.30
1.30
1.30
1.30
1.30
–10 °C
4.80
3.60
2.60
2.60
2.60
2.60
2.60
2.60
2.60
Ripple Current
(mA r.m.s)(100 kHz)
20
45
65
95
125
135
145
155
155
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
07 Jun. 2015
– EEE-64 –
Aluminum Electrolytic Capacitors/ FC
■ Standard Products
Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h
Case size
Speciﬁcation
Lead Length
Ripple Imped- Endur- Lead
Lead Space
Cap.
W.V.
(±20 %) Dia. Length Current ance ance Dia.
Taping Taping
(100 kHz) (100 kHz)
Straight
✽B
✽H
(+105 °C) (+20 °C)
(V)
(μF) (mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm)
27
56
100
120
220
270
330
390
470
560
820
1000
1200
1500
1800
6.3
2200
2700
3300
3900
4700
5600
6800
8200
10000
12000
15000
4
5
5
6.3
6.3
6.3
6.3
8
8
8
8
10
10
8
10
10
12.5
10
10
16
10
12.5
16
12.5
18
12.5
12.5
16
12.5
16
12.5
16
18
16
16
18
16
18
18
7
7
11
7
11.2
11.2
11.2
11.5
11.5
11.5
15
12.5
12.5
20
16
20
15
25
25
15
30
20
15
20
15
25
30
20
35
20
40
25
20
31.5
35.5
25
40
31.5
35.5
65
120
175
200
290
290
290
555
555
555
730
755
755
995
1050
1220
1205
1440
1440
1690
1815
1655
1690
1655
2000
1945
2310
2205
2510
2205
2655
2555
2490
3010
3150
2740
3360
3635
3680
2.000
0.950
0.800
0.450
0.350
0.350
0.350
0.117
0.117
0.117
0.085
0.090
0.090
0.065
0.068
0.052
0.065
0.045
0.045
0.043
0.035
0.038
0.043
0.038
0.038
0.030
0.025
0.029
0.022
0.029
0.018
0.022
0.028
0.018
0.016
0.020
0.015
0.016
0.015
1000
1000
1000
1000
1000
1000
1000
2000
2000
2000
2000
3000
3000
2000
3000
3000
5000
3000
3000
5000
3000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
0.45
0.45
0.50
0.45
0.50
0.50
0.50
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.80
0.60
0.60
0.80
0.60
0.80
0.60
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
1.5
2.0
2.0
2.5
2.5
2.5
2.5
3.5
3.5
3.5
3.5
5.0
5.0
3.5
5.0
5.0
5.0
5.0
5.0
7.5
5.0
5.0
7.5
5.0
7.5
5.0
5.0
7.5
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Min. Packaging Q'ty
Part No.
EEAFC0J270( )
EEAFC0J560( )
EEUFC0J101( )
EEAFC0J121( )
EEUFC0J221( )
EEUFC0J271( )
EEUFC0J331S( )
EEUFC0J391( )
EEUFC0J471( )
EEUFC0J561( )
EEUFC0J821L( )
EEUFC0J821( )
EEUFC0J102( )
EEUFC0J122L( )
EEUFC0J122( )
EEUFC0J152( )
EEUFC0J152S( )
EEUFC0J182( )
EEUFC0J222( )
EEUFC0J222S( )
EEUFC0J272L
EEUFC0J272( )
EEUFC0J272S( )
EEUFC0J332( )
EEUFC0J332S( )
EEUFC0J392( )
EEUFC0J472
EEUFC0J472S( )
EEUFC0J562L
EEUFC0J562( )
EEUFC0J682L
EEUFC0J682( )
EEUFC0J682S( )
EEUFC0J822
EEUFC0J103
EEUFC0J103S( )
EEUFC0J123L
EEUFC0J123
EEUFC0J153
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
200
100
200
100
200
100
100
100
100
100
100
100
100
100
100
100
50
50
2000
2000
2000
2000
2000
2000
2000
1000
1000
1000
1000
500
500
1000
500
500
500
500
500
250
500
250
500
250
500
250
250
250
250
250
· When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
07 Jun. 2015
– EEE-65 –
Aluminum Electrolytic Capacitors/ FC
■ Standard Products
Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h
Case size
Speciﬁcation
Lead Length
Ripple Imped- Endur- Lead
Lead Space
Cap.
W.V.
(±20 %) Dia. Length Current ance ance Dia.
Taping Taping
(100 kHz) (100 kHz)
Straight
✽B
✽H
(+105 °C) (+20 °C)
(V)
(μF) (mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm)
22
39
82
100
150
180
220
330
390
470
560
680
820
1000
1200
10
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
10000
12000
4
5
5
6.3
5
6.3
6.3
6.3
8
8
8
10
8
10
10
8
10
10
12.5
10
12.5
16
10
12.5
12.5
18
12.5
16
12.5
16
12.5
16
16
18
16
18
16
18
18
18
7
7
11
7
11
11.2
11.2
11.2
11.5
11.5
11.5
12.5
15
12.5
16
20
16
20
15
25
20
15
30
20
25
15
30
20
35
20
40
25
25
20
31.5
25
35.5
31.5
35.5
40
65
120
175
200
175
290
290
290
555
555
555
755
730
755
1050
995
1050
1220
1205
1440
1655
1690
1815
1655
1945
2000
2310
2205
2510
2205
2655
2555
2555
2490
3010
2740
3150
3635
3680
3735
2.000
0.950
0.800
0.450
0.800
0.350
0.350
0.350
0.117
0.117
0.117
0.090
0.085
0.090
0.068
0.065
0.068
0.052
0.065
0.045
0.038
0.043
0.035
0.038
0.030
0.038
0.025
0.029
0.022
0.029
0.018
0.022
0.022
0.028
0.018
0.020
0.016
0.016
0.015
0.014
1000
1000
1000
1000
1000
1000
1000
1000
2000
2000
2000
3000
2000
3000
3000
2000
3000
3000
5000
3000
5000
5000
3000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
0.45
0.45
0.50
0.45
0.50
0.50
0.50
0.50
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.80
0.60
0.60
0.60
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
1.5
2.0
2.0
2.5
2.0
2.5
2.5
2.5
3.5
3.5
3.5
5.0
3.5
5.0
5.0
3.5
5.0
5.0
5.0
5.0
5.0
7.5
5.0
5.0
5.0
7.5
5.0
7.5
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Min. Packaging Q'ty
Part No.
EEAFC1A220( )
EEAFC1A390( )
EEUFC1A820( )
EEAFC1A820( )
EEUFC1A101S( )
EEUFC1A151( )
EEUFC1A181( )
EEUFC1A221S( )
EEUFC1A331( )
EEUFC1A391( )
EEUFC1A471( )
EEUFC1A561( )
EEUFC1A681L( )
EEUFC1A681( )
EEUFC1A821( )
EEUFC1A102L( )
EEUFC1A102( )
EEUFC1A122( )
EEUFC1A122S( )
EEUFC1A152( )
EEUFC1A182( )
EEUFC1A182S( )
EEUFC1A222L
EEUFC1A222( )
EEUFC1A272( )
EEUFC1A272S( )
EEUFC1A332
EEUFC1A332S( )
EEUFC1A392L
EEUFC1A392( )
EEUFC1A472L
EEUFC1A472( )
EEUFC1A562( )
EEUFC1A562S( )
EEUFC1A682
EEUFC1A682S( )
EEUFC1A822L
EEUFC1A822
EEUFC1A103
EEUFC1A123
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
200
200
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
2000
2000
2000
2000
2000
2000
2000
2000
1000
1000
1000
500
1000
500
500
1000
500
500
500
500
500
250
500
500
250
250
250
250
250
250
250
· When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
07 Jun. 2015
– EEE-66 –
Aluminum Electrolytic Capacitors/ FC
■ Standard Products
Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h
Case size
Speciﬁcation
Lead Length
Ripple Imped- Endur- Lead
Lead Space
Cap.
W.V.
(±20 %) Dia. Length Current ance ance Dia.
Taping Taping
(100 kHz) (100 kHz)
Straight
✽B
✽H
(+105 °C) (+20 °C)
(V)
(μF) (mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm)
15
27
47
56
68
100
120
220
270
330
390
470
560
680
820
1000
16
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
4
5
5
5
6.3
5
6.3
6.3
8
8
8
10
8
10
10
8
10
10
12.5
10
10
10
16
10
12.5
16
12.5
18
12.5
16
12.5
16
12.5
18
16
18
16
18
16
18
16
18
7
7
11
11
7
11
11.2
11.2
11.5
11.5
11.5
12.5
15
12.5
16
20
16
20
15
20
25
25
15
30
20
15
25
15
25
20
30
20
35
20
25
20
31.5
25
35.5
31.5
40
35.5
65
120
175
175
200
175
290
290
555
555
555
755
730
755
1050
995
1050
1220
1205
1220
1440
1440
1690
1815
1655
1690
1945
2000
1945
2205
2310
2205
2510
2490
2555
2490
3010
2740
3150
3635
3360
3680
2.000
0.950
0.800
0.800
0.450
0.800
0.350
0.350
0.117
0.117
0.117
0.090
0.085
0.090
0.068
0.065
0.068
0.052
0.065
0.052
0.045
0.045
0.043
0.035
0.038
0.043
0.030
0.038
0.030
0.029
0.025
0.029
0.022
0.028
0.022
0.028
0.018
0.020
0.016
0.016
0.015
0.015
1000
1000
1000
1000
1000
1000
1000
1000
2000
2000
2000
3000
2000
3000
3000
2000
3000
3000
5000
3000
3000
3000
5000
3000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
0.45
0.45
0.50
0.50
0.45
0.50
0.50
0.50
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.80
0.60
0.60
0.80
0.60
0.80
0.60
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
1.5
2.0
2.0
2.0
2.5
2.0
2.5
2.5
3.5
3.5
3.5
5.0
3.5
5.0
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
5.0
7.5
5.0
7.5
5.0
7.5
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
7.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Min. Packaging Q'ty
Part No.
EEAFC1C150( )
EEAFC1C270( )
EEUFC1C470( )
EEUFC1C560( )
EEAFC1C560( )
EEUFC1C680( )
EEUFC1C101( )
EEUFC1C121( )
EEUFC1C221( )
EEUFC1C271( )
EEUFC1C331( )
EEUFC1C391( )
EEUFC1C471L( )
EEUFC1C471( )
EEUFC1C561( )
EEUFC1C681L( )
EEUFC1C681( )
EEUFC1C821( )
EEUFC1C821S( )
EEUFC1C102S( )
EEUFC1C102( )
EEUFC1C122( )
EEUFC1C122S( )
EEUFC1C152L
EEUFC1C152( )
EEUFC1C152S( )
EEUFC1C182( )
EEUFC1C182S( )
EEUFC1C222( )
EEUFC1C222S( )
EEUFC1C272L
EEUFC1C272( )
EEUFC1C332
EEUFC1C332S( )
EEUFC1C392( )
EEUFC1C392S( )
EEUFC1C472
EEUFC1C472S( )
EEUFC1C562L
EEUFC1C562
EEUFC1C682
EEUFC1C822
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
200
100
200
100
200
100
100
100
100
100
100
100
100
100
100
50
100
50
2000
2000
2000
2000
2000
2000
2000
2000
1000
1000
1000
500
1000
500
500
1000
500
500
500
500
500
500
250
500
250
500
250
500
250
250
250
250
250
250
· When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
07 Jun. 2015
– EEE-67 –
Aluminum Electrolytic Capacitors/ FC
■ Standard Products
Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h
Case size
Speciﬁcation
Lead Length
Ripple
ImpedEndurLead
Lead Space
Cap.
W.V.
(±20 %) Dia. Length Current ance ance Dia.
Taping Taping
(100 kHz) (100 kHz)
Straight
✽B
✽H
(+105 °C) (+20 °C)
(V)
(μF) (mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm)
10
22
39
47
82
100
180
220
270
330
390
470
560
680
25
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
4
5
5
6.3
5
6.3
6.3
8
8
10
8
10
10
8
10
10
12.5
10
10
12.5
10
12.5
16
12.5
18
12.5
16
12.5
16
12.5
18
16
16
18
16
18
18
18
7
7
11
7
11
11.2
11.2
11.5
11.5
12.5
15
12.5
16
20
16
20
15
20
25
20
30
20
15
25
15
25
20
30
20
35
20
25
31.5
25
35.5
31.5
35.5
40
65
120
175
200
175
290
290
555
555
755
730
755
1050
995
1050
1220
1205
1220
1440
1655
1815
1655
1690
1945
2000
1945
2205
2310
2205
2510
2490
2555
3010
2740
3150
3635
3680
3735
2.000
0.950
0.800
0.450
0.800
0.350
0.350
0.117
0.117
0.090
0.085
0.090
0.068
0.065
0.068
0.052
0.065
0.052
0.045
0.038
0.035
0.038
0.043
0.030
0.038
0.030
0.029
0.025
0.029
0.022
0.028
0.022
0.018
0.020
0.016
0.016
0.015
0.014
1000
1000
1000
1000
1000
1000
1000
2000
2000
3000
2000
3000
3000
2000
3000
3000
5000
3000
3000
5000
3000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
0.45
0.45
0.50
0.45
0.50
0.50
0.50
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.80
0.60
0.80
0.60
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
1.5
2.0
2.0
2.5
2.0
2.5
2.5
3.5
3.5
5.0
3.5
5.0
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
7.5
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Min. Packaging Q'ty
Part No.
EEAFC1E100( )
EEAFC1E220( )
EEUFC1E390( )
EEAFC1E390( )
EEUFC1E470( )
EEUFC1E820( )
EEUFC1E101S( )
EEUFC1E181( )
EEUFC1E221( )
EEUFC1E271( )
EEUFC1E331L( )
EEUFC1E331( )
EEUFC1E391( )
EEUFC1E471L( )
EEUFC1E471( )
EEUFC1E561( )
EEUFC1E561S( )
EEUFC1E681( )
EEUFC1E821( )
EEUFC1E821S( )
EEUFC1E102L
EEUFC1E102( )
EEUFC1E102S( )
EEUFC1E122( )
EEUFC1E122S( )
EEUFC1E152( )
EEUFC1E152S( )
EEUFC1E182L
EEUFC1E182( )
EEUFC1E222
EEUFC1E222S( )
EEUFC1E272( )
EEUFC1E332
EEUFC1E332S( )
EEUFC1E392L
EEUFC1E392
EEUFC1E472
EEUFC1E562
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
200
100
200
100
200
100
100
100
100
100
100
100
100
100
50
50
50
2000
2000
2000
2000
2000
2000
2000
1000
1000
500
1000
500
500
1000
500
500
500
500
500
500
500
250
500
250
500
250
250
250
250
250
· When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
07 Jun. 2015
– EEE-68 –
Aluminum Electrolytic Capacitors/ FC
■ Standard Products
Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h
Case size
Speciﬁcation
Lead Length
Ripple Imped- Endur- Lead
Lead Space
Cap.
W.V.
(±20 %) Dia. Length Current ance ance Dia.
Taping Taping
(100 kHz) (100 kHz)
Straight
✽B
✽H
(+105 °C) (+20 °C)
(V)
(μF) (mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm)
6.8
12
22
27
33
47
56
68
100
120
150
180
220
270
330
390
470
35
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4
5
5
5
6.3
5
6.3
6.3
6.3
8
8
8
10
8
10
10
8
10
10
12.5
10
10
12.5
10
12.5
16
12.5
18
12.5
16
12.5
16
12.5
16
18
12.5
16
18
16
18
16
18
18
18
7
7
11
11
7
11
11.2
11.2
11.2
11.5
11.5
11.5
12.5
15
12.5
16
20
16
20
15
20
25
20
30
20
15
25
15
25
20
30
20
35
25
20
40
25
20
31.5
25
35.5
31.5
35.5
40
65
120
175
175
200
175
290
290
290
555
555
555
755
730
755
1050
995
1050
1220
1205
1220
1440
1655
1815
1655
1690
1945
2000
1945
2205
2310
2205
2510
2555
2490
2655
2555
2490
3010
2740
3150
3635
3680
3735
2.000
0.950
0.800
0.800
0.450
0.080
0.350
0.350
0.350
0.117
0.117
0.117
0.090
0.085
0.090
0.068
0.065
0.068
0.052
0.065
0.052
0.045
0.038
0.035
0.038
0.043
0.030
0.038
0.030
0.029
0.025
0.029
0.022
0.022
0.028
0.018
0.022
0.028
0.018
0.020
0.016
0.016
0.015
0.014
1000
1000
1000
1000
1000
1000
1000
1000
1000
2000
2000
2000
3000
2000
3000
3000
2000
3000
3000
5000
3000
3000
5000
3000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
0.45
0.45
0.50
0.50
0.45
0.50
0.50
0.50
0.50
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.80
0.60
0.80
0.60
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
1.5
2.0
2.0
2.0
2.5
2.0
2.5
2.5
2.5
3.5
3.5
3.5
5.0
3.5
5.0
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
7.5
5.0
7.5
5.0
7.5
7.5
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Min. Packaging Q'ty
Part No.
EEAFC1V6R8( )
EEAFC1V120( )
EEUFC1V220( )
EEUFC1V270( )
EEAFC1V270( )
EEUFC1V330( )
EEUFC1V470( )
EEUFC1V560( )
EEUFC1V680( )
EEUFC1V101( )
EEUFC1V121( )
EEUFC1V151( )
EEUFC1V181( )
EEUFC1V221L( )
EEUFC1V221( )
EEUFC1V271( )
EEUFC1V331L( )
EEUFC1V331( )
EEUFC1V391( )
EEUFC1V391S( )
EEUFC1V471( )
EEUFC1V561( )
EEUFC1V561S( )
EEUFC1V681L
EEUFC1V681( )
EEUFC1V681S( )
EEUFC1V821L( )
EEUFC1V821( )
EEUFC1V102( )
EEUFC1V102S( )
EEUFC1V122L
EEUFC1V122( )
EEUFC1V152L
EEUFC1V152( )
EEUFC1V152S( )
EEUFC1V182L
EEUFC1V182( )
EEUFC1V182S( )
EEUFC1V222
EEUFC1V222S( )
EEUFC1V272L
EEUFC1V272
EEUFC1V332
EEUFC1V392
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
200
100
200
100
200
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
2000
2000
2000
2000
2000
2000
2000
2000
2000
1000
1000
1000
500
1000
500
500
1000
500
500
500
500
500
500
500
250
500
250
500
250
250
250
250
250
250
250
· When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
07 Jun. 2015
– EEE-69 –
Aluminum Electrolytic Capacitors/ FC
■ Standard Products
Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h
Case size
Speciﬁcation
Lead Length
Ripple Imped- Endur- Lead
Lead Space
Cap.
W.V.
(±20 %) Dia. Length Current ance ance Dia.
Taping Taping
(100 kHz) (100 kHz)
Straight
✽B
✽H
(+105 °C) (+20 °C)
(V)
(μF) (mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm)
2.2
3.3
4.7
10
12
15
18
22
33
39
47
68
82
100
120
150
180
220
50
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
5
5
5
5
5
5
5
5
6.3
6.3
6.3
8
8
10
8
10
10
8
10
10
12.5
10
10
12.5
12.5
16
10
12.5
12.5
18
12.5
16
12.5
18
12.5
16
16
18
16
16
18
18
11
11
11
11
11
11
11
11
11.2
11.2
11.2
11.5
11.5
12.5
15
12.5
16
20
16
20
15
25
30
20
20
15
30
25
25
15
30
20
35
20
40
25
31.5
25
35.5
40
31.5
35.5
45
65
95
125
135
145
155
155
260
260
260
485
485
615
635
615
850
860
850
1030
1150
1200
1610
1480
1480
1610
1610
1832
1832
1900
2215
1835
2285
2420
2590
2235
2700
2610
2790
2845
3000
3100
1.800
1.300
1.300
1.300
1.300
1.300
1.300
1.300
0.600
0.600
0.600
0.234
0.234
0.162
0.155
0.162
0.119
0.120
0.119
0.090
0.110
0.082
0.060
0.063
0.063
0.080
0.060
0.050
0.050
0.068
0.040
0.048
0.034
0.042
0.030
0.034
0.028
0.029
0.025
0.023
0.025
0.023
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
2000
2000
3000
2000
3000
3000
2000
3000
3000
5000
3000
3000
5000
5000
5000
3000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.80
0.60
0.60
0.60
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
3.5
3.5
5.0
3.5
5.0
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
5.0
5.0
7.5
5.0
7.5
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
5.0
7.5
7.5
7.5
7.5
7.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Min. Packaging Q'ty
Part No.
EEUFC1H2R2( )
EEUFC1H3R3( )
EEUFC1H4R7( )
EEUFC1H100L( )
EEUFC1H120( )
EEUFC1H150( )
EEUFC1H180( )
EEUFC1H220( )
EEUFC1H330( )
EEUFC1H390( )
EEUFC1H470( )
EEUFC1H680( )
EEUFC1H820( )
EEUFC1H101( )
EEUFC1H121L( )
EEUFC1H121( )
EEUFC1H151( )
EEUFC1H181L( )
EEUFC1H181( )
EEUFC1H221( )
EEUFC1H221S( )
EEUFC1H271( )
EEUFC1H331L
EEUFC1H331( )
EEUFC1H391( )
EEUFC1H391S( )
EEUFC1H471L
EEUFC1H471( )
EEUFC1H561( )
EEUFC1H561S( )
EEUFC1H681L
EEUFC1H681( )
EEUFC1H821L
EEUFC1H821( )
EEUFC1H102L
EEUFC1H102( )
EEUFC1H122
EEUFC1H122S( )
EEUFC1H152L
EEUFC1H182L
EEUFC1H182
EEUFC1H222
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
200
200
100
100
200
200
100
100
100
100
100
100
100
100
100
100
100
50
50
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
1000
1000
500
1000
500
500
1000
500
500
500
500
500
500
250
500
500
250
250
250
250
250
· When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
07 Jun. 2015
– EEE-70 –
Aluminum Electrolytic Capacitors/ FC
■ Standard Products
Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h
Case size
Speciﬁcation
Lead Length
Ripple Imped- Endur- Lead
Lead Space
Cap.
W.V.
(±20 %) Dia. Length Current ance ance Dia.
Taping Taping
(100 kHz) (100 kHz)
Straight
✽B
✽H
(+105 °C) (+20 °C)
(V)
(μF) (mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm)
12
22
33
47
56
68
82
100
120
150
180
220
270
63
330
390
470
560
680
820
1000
1200
1500
1800
5
6.3
6.3
8
8
8
10
8
10
10
8
10
12.5
10
10
12.5
16
10
12.5
12.5
18
12.5
16
16
12.5
16
18
12.5
16
18
16
16
16
18
18
18
11
11.2
11.2
11.5
11.5
11.5
12.5
15
12.5
16
20
20
15
20
25
20
15
30
20
25
15
30
20
25
35
25
20
40
31.5
25
31.5
35.5
40
31.5
35.5
40
145
240
240
405
405
405
535
535
535
600
690
885
1020
885
1050
1285
1410
1300
1285
1720
1690
2090
1765
2160
2265
2160
2290
2560
2670
2585
2670
2770
2825
2950
3095
3205
2.000
1.000
1.000
0.342
0.342
0.342
0.256
0.230
0.256
0.194
0.178
0.147
0.150
0.147
0.130
0.085
0.090
0.090
0.085
0.070
0.086
0.055
0.059
0.050
0.047
0.050
0.055
0.042
0.043
0.043
0.043
0.036
0.030
0.032
0.030
0.025
1000
1000
1000
2000
2000
2000
3000
2000
3000
3000
2000
3000
5000
3000
3000
5000
5000
3000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
0.50
0.50
0.50
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.80
0.60
0.60
0.60
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
2.0
2.5
2.5
3.5
3.5
3.5
5.0
3.5
5.0
5.0
3.5
5.0
5.0
5.0
5.0
5.0
7.5
5.0
5.0
5.0
7.5
5.0
7.5
7.5
5.0
7.5
7.5
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
2.5
2.5
2.5
Min. Packaging Q'ty
Part No.
EEUFC1J120( )
EEUFC1J220( )
EEUFC1J330( )
EEUFC1J470( )
EEUFC1J560( )
EEUFC1J680( )
EEUFC1J820( )
EEUFC1J101L( )
EEUFC1J101( )
EEUFC1J121( )
EEUFC1J151( )
EEUFC1J181( )
EEUFC1J181S( )
EEUFC1J221X( )
EEUFC1J221( )
EEUFC1J221S( )
EEUFC1J271( )
EEUFC1J331L
EEUFC1J331( )
EEUFC1J391( )
EEUFC1J391S( )
EEUFC1J471L
EEUFC1J471( )
EEUFC1J561( )
EEUFC1J681L
EEUFC1J681( )
EEUFC1J681S( )
EEUFC1J821L
EEUFC1J821
EEUFC1J821S( )
EEUFC1J102U
EEUFC1J102
EEUFC1J122L
EEUFC1J122
EEUFC1J152
EEUFC1J182
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
200
200
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
2000
2000
2000
1000
1000
1000
500
1000
500
500
1000
500
500
500
500
500
250
500
500
250
250
250
250
250
250
· When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
07 Jun. 2015
– EEE-71 –
Aluminum Electrolytic Capacitors/ FC
■ Standard Products
Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h
Case size
W.V.
Cap.
(±20 %)
(V)
(μF)
5.6
12
22
33
39
56
68
100
120
100
150
180
220
270
330
390
470
560
680
Speciﬁcation
Lead Length
Ripple Imped- Endur- Lead
Lead Space
Current ance ance Dia.
Dia. Length
Taping Taping
(100 kHz) (100 kHz)
Straight
✽B
✽H
(+105 °C) (+20 °C)
(mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm)
5
6.3
8
8
10
8
10
10
10
12.5
10
12.5
16
12.5
18
12.5
16
12.5
16
12.5
18
16
18
16
18
16
18
18
11
11.2
11.5
15
12.5
20
16
20
25
15
30
20
15
25
15
30
20
35
25
40
20
31.5
25
35.5
31.5
40
35.5
40
80
114
260
340
306
455
400
463
599
511
698
671
793
807
917
937
995
1040
1170
1130
1230
1520
1420
1730
1600
1920
1770
2300
4.10
1.80
0.680
0.450
0.530
0.330
0.360
0.240
0.210
0.230
0.150
0.180
0.140
0.110
0.120
0.098
0.110
0.087
0.089
0.072
0.080
0.062
0.070
0.053
0.062
0.047
0.041
0.036
1000
1000
2000
2000
3000
2000
3000
3000
3000
5000
3000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
2.0
2.5
3.5
3.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
7.5
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
2.5
2.5
Min. Packaging Q'ty
Part No.
EEUFC2A5R6( )
EEUFC2A120( )
EEUFC2A220( )
EEUFC2A330L( )
EEUFC2A330( )
EEUFC2A390L( )
EEUFC2A390( )
EEUFC2A560( )
EEUFC2A680L( )
EEUFC2A680( )
EEUFC2A101L
EEUFC2A101( )
EEUFC2A121S( )
EEUFC2A151( )
EEUFC2A151S( )
EEUFC2A181L
EEUFC2A181( )
EEUFC2A221L
EEUFC2A221( )
EEUFC2A271L
EEUFC2A271S( )
EEUFC2A331
EEUFC2A331S( )
EEUFC2A391L
EEUFC2A391
EEUFC2A471
EEUFC2A561
EEUFC2A681
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
200
200
200
200
200
200
100
200
100
200
100
100
100
100
100
100
100
100
100
100
50
100
50
50
2000
2000
1000
1000
500
1000
500
500
500
500
500
250
500
250
250
250
250
250
· When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
07 Jun. 2015
– EEE-72 –
Aluminum Electrolytic Capacitors/ FK
Radial Lead Type
Series:
FK
Type:
A
■ Features
● Low impedance (10 % to 30 % less than FC Series)
Miniaturization (30 % to 40 % less than FC Series)
● Endurance : 3000 h to 5000 h at +105 °C
● AEC-Q200 qualiﬁed ✽
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan d
–55 °C to +105 °C
6.3 V.DC to 35 V.DC
180 μF to 12000 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV (μA) After 2 minutes
W.V.
6.3
10
16
25
35
tan d
0.22
0.19
0.16
0.14
0.12
Add 0.02 per 1000 μF for products of 1000 μF or more.
(120 Hz/+20 °C)
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), when the capacitors
are restored to 20 °C, the capacitors shall meet the limits speciﬁed bellow.
Duration : 08: 3000 hours , 010: 4000 hours , 012.5 to 018: 5000 hours
Endurance
Capacitance change ±20 % of initial measured value
tan d
< 200 % of initial speciﬁed value
DC leakage current
< initial speciﬁed value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits speciﬁed in Endurance. (With voltage treatment)
Shelf Life
■ Frequency correction factor for ripple current
W.V.(V.DC)
180
6.3 to 35
Frequency (Hz)
Cap (μF)
390
1200
60
120
1k
10 k
100 k
to
330
0.60
0.70
0.85
0.95
1.00
to
1000
0.65
0.75
0.90
0.98
1.00
to 12000
0.75
0.80
0.95
1.00
1.00
■ Dimensions in mm (not to scale)
Pressure relief
fd±0.05
Sleeve
(Unit : mm)
08
010
+
L=
14 min.
0D±0.5
3 min.
F±0.5
–
0D±0.5
=L16 : L±1.5
L20 : L±2.0
Body Dia. fD
8
10
16
18
Body Length L
—
—
12.5 to 25
12.5
30 to 40
—
—
Lead Dia. fd
0.6
0.6
0.6
0.8
0.8
0.8
Lead space F
3.5
5.0
5.0
5.0
7.5
7.5
✽ This product qualify for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2014
– EEE-73 –
Aluminum Electrolytic Capacitors/ FK
■ Case size/Impedance/Ripple current
Impedance
(Ω)/(100 kHz)
Case size
(0D×L)
8
8
8
10
10
10
10
10
12.5
12.5
12.5
12.5
12.5
12.5
16
16
16
18
18
18
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
11.5
15
20
12.5
16
20
25
30
15
20
25
30
35
40
15
20
25
15
20
25
Ripple Current
(mA r.m.s.)/(100 kHz)
+20 °C
–10 °C
+105 °C
0.090
0.062
0.044
0.063
0.049
0.035
0.033
0.025
0.048
0.029
0.022
0.018
0.016
0.014
0.038
0.026
0.019
0.036
0.025
0.018
0.180
0.124
0.088
0.126
0.098
0.070
0.066
0.050
0.096
0.058
0.044
0.036
0.032
0.028
0.076
0.052
0.038
0.072
0.050
0.036
630
860
1220
900
1240
1490
1680
2140
1400
1890
2280
2720
2940
3010
1800
2330
2760
2060
2640
2850
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2014
– EEE-74 –
Aluminum Electrolytic Capacitors/ FK
■ Standard Products
Endurance : 105 °C 08=3000 h, 010=4000 h, 012.5 to 018=5000 h
Case size
W.V.
Cap.
(±20 %)
Dia.
(V)
(μF)
(mm)
680
1000
1500
1800
2200
6.3
3300
4700
5600
6800
8200
12000
560
820
1200
1500
1800
10
2700
3900
4700
5600
6800
8200
8
8
10
8
10
12.5
10
10
10
12.5
16
12.5
18
12.5
16
12.5
12.5
16
18
18
8
8
10
8
10
12.5
10
10
10
12.5
16
12.5
18
12.5
16
12.5
12.5
16
18
18
Speciﬁcation
Ripple Imped- EndurCurrent ance
ance
Length
(100 kHz) (100 kHz)
(+105 °C) (+20 °C)
(hours)
(mm) (mA r.m.s.) (Ω)
11.5
15
12.5
20
16
15
20
25
30
20
15
25
15
30
20
35
40
25
20
25
11.5
15
12.5
20
16
15
20
25
30
20
15
25
15
30
20
35
40
25
20
25
630
860
900
1220
1240
1400
1490
1680
2140
1890
1800
2280
2060
2720
2330
2940
3010
2760
2640
2850
630
860
900
1220
1240
1400
1490
1680
2140
1890
1800
2280
2060
2720
2330
2940
3010
2760
2640
2850
0.090
0.062
0.063
0.044
0.049
0.048
0.035
0.033
0.025
0.029
0.038
0.022
0.036
0.018
0.026
0.016
0.014
0.019
0.025
0.018
0.090
0.062
0.063
0.044
0.049
0.048
0.035
0.033
0.025
0.029
0.038
0.022
0.036
0.018
0.026
0.016
0.014
0.019
0.025
0.018
3000
3000
4000
3000
4000
5000
4000
4000
4000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
3000
3000
4000
3000
4000
5000
4000
4000
4000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
Lead Length
Lead
Lead Space
Dia.
Taping
Straight
✽B
(mm)
(mm)
(mm)
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
3.5
3.5
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
7.5
5.0
5.0
7.5
7.5
7.5
3.5
3.5
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
7.5
5.0
5.0
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
Min. Packaging Q'ty
Part No.
EEUFK0J681( )
EEUFK0J102L( )
EEUFK0J102( )
EEUFK0J152L( )
EEUFK0J152( )
EEUFK0J182S( )
EEUFK0J222( )
EEUFK0J222L( )
EEUFK0J332L
EEUFK0J332( )
EEUFK0J332S( )
EEUFK0J472( )
EEUFK0J472S( )
EEUFK0J562L
EEUFK0J562S( )
EEUFK0J682L
EEUFK0J822L
EEUFK0J822( )
EEUFK0J822S( )
EEUFK0J123S( )
EEUFK1A561( )
EEUFK1A821L( )
EEUFK1A821( )
EEUFK1A122L( )
EEUFK1A122( )
EEUFK1A152S( )
EEUFK1A182( )
EEUFK1A182L( )
EEUFK1A272L
EEUFK1A272( )
EEUFK1A272S( )
EEUFK1A392( )
EEUFK1A392S( )
EEUFK1A472L
EEUFK1A472S( )
EEUFK1A562L
EEUFK1A682L
EEUFK1A682( )
EEUFK1A682S( )
EEUFK1A822S( )
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
200
200
200
200
100
200
100
200
100
100
100
100
100
100
100
100
200
200
200
200
200
200
200
200
100
200
100
200
100
100
100
100
100
100
100
100
1000
1000
500
1000
500
500
500
500
500
250
500
250
250
250
250
250
1000
1000
500
1000
500
500
500
500
500
250
500
250
250
250
250
250
· When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2014
– EEE-75 –
Aluminum Electrolytic Capacitors/ FK
■ Standard Products
Endurance : 105 °C 08=3000 h, 010=4000 h, 012.5 to 018=5000 h
Case size
W.V.
Cap.
(±20 %)
Dia.
(V)
(μF)
(mm)
390
680
820
1000
1200
1500
16
2200
2700
3300
3900
4700
5600
6800
270
390
470
560
820
1000
1200
25
1500
1800
2200
2700
3300
4700
8
8
10
8
10
10
12.5
10
10
12.5
16
12.5
18
12.5
12.5
16
12.5
18
16
18
8
8
10
8
10
10
12.5
10
12.5
10
16
12.5
18
12.5
16
12.5
12.5
16
18
18
Speciﬁcation
Ripple Imped- EndurCurrent ance
ance
Length
(100 kHz) (100 kHz)
(+105 °C) (+20 °C)
(mm) (mA r.m.s.) (Ω)
(hours)
11.5
15
12.5
20
16
20
15
25
30
20
15
25
15
30
35
20
40
20
25
25
11.5
15
12.5
20
16
20
15
25
20
30
15
25
15
30
20
35
40
25
20
25
630
860
900
1220
1240
1490
1400
1680
2140
1890
1800
2280
2060
2720
2940
2330
3010
2640
2760
2850
630
860
900
1220
1240
1490
1400
1680
1890
2140
1800
2280
2060
2720
2330
2940
3010
2760
2640
2850
0.090
0.062
0.063
0.044
0.049
0.035
0.048
0.033
0.025
0.029
0.038
0.022
0.036
0.018
0.016
0.026
0.014
0.025
0.019
0.018
0.090
0.062
0.063
0.044
0.049
0.035
0.048
0.033
0.029
0.025
0.038
0.022
0.036
0.018
0.026
0.016
0.014
0.019
0.025
0.018
3000
3000
4000
3000
4000
4000
5000
4000
4000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
3000
3000
4000
3000
4000
4000
5000
4000
5000
4000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
Lead Length
Lead
Lead Space
Dia.
Taping
Straight
✽B
(mm)
(mm)
(mm)
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
3.5
3.5
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
5.0
7.5
5.0
7.5
7.5
7.5
3.5
3.5
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
7.5
5.0
5.0
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
Min. Packaging Q'ty
Part No.
EEUFK1C391( )
EEUFK1C681L( )
EEUFK1C681( )
EEUFK1C821L( )
EEUFK1C102( )
EEUFK1C122( )
EEUFK1C122S( )
EEUFK1C152L( )
EEUFK1C222L
EEUFK1C222( )
EEUFK1C222S( )
EEUFK1C272( )
EEUFK1C272S( )
EEUFK1C332L
EEUFK1C392L
EEUFK1C392S( )
EEUFK1C472L
EEUFK1C472S( )
EEUFK1C562( )
EEUFK1C682S( )
EEUFK1E271( )
EEUFK1E391L( )
EEUFK1E471( )
EEUFK1E561L( )
EEUFK1E561( )
EEUFK1E821( )
EEUFK1E821S( )
EEUFK1E102L( )
EEUFK1E122( )
EEUFK1E152L
EEUFK1E152S( )
EEUFK1E182( )
EEUFK1E182S( )
EEUFK1E222L
EEUFK1E222S( )
EEUFK1E272L
EEUFK1E332L
EEUFK1E332( )
EEUFK1E332S( )
EEUFK1E472S( )
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
200
200
200
200
100
200
100
200
100
100
100
100
100
100
100
100
200
200
200
200
200
200
200
200
200
100
100
200
100
100
100
100
100
100
100
100
1000
1000
500
1000
500
500
500
500
500
250
500
250
250
250
250
250
1000
1000
500
1000
500
500
500
500
500
250
500
250
250
250
250
250
· When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2014
– EEE-76 –
Aluminum Electrolytic Capacitors/ FK
■ Standard Products
Endurance : 105 °C 08=3000 h, 010=4000 h, 012.5 to 018=5000 h
Case size
W.V.
Cap.
(±20 %)
Dia.
(V)
(μF)
(mm)
180
270
390
560
680
820
35
1000
1200
1500
1800
2200
3300
8
8
10
8
10
10
12.5
10
12.5
10
16
12.5
18
12.5
12.5
16
12.5
16
18
18
Speciﬁcation
Ripple Imped- EndurCurrent ance
ance
Length
(100 kHz) (100 kHz)
(+105 °C) (+20 °C)
(hours)
(mm) (mA r.m.s.) (Ω)
11.5
15
12.5
20
16
20
15
25
20
30
15
25
15
30
35
20
40
25
20
25
630
860
900
1220
1240
1490
1400
1680
1890
2140
1800
2280
2060
2720
2940
2330
3010
2760
2640
2850
0.090
0.062
0.063
0.044
0.049
0.035
0.048
0.033
0.029
0.025
0.038
0.022
0.036
0.018
0.016
0.026
0.014
0.019
0.025
0.018
3000
3000
4000
3000
4000
4000
5000
4000
5000
4000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
Lead Length
Lead
Lead Space
Dia.
Taping
Straight
✽B
(mm)
(mm)
(mm)
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
3.5
3.5
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
5.0
7.5
5.0
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
Min. Packaging Q'ty
Part No.
EEUFK1V181( )
EEUFK1V271L( )
EEUFK1V271( )
EEUFK1V391L( )
EEUFK1V391( )
EEUFK1V561( )
EEUFK1V561S( )
EEUFK1V681L( )
EEUFK1V821( )
EEUFK1V102L
EEUFK1V102S( )
EEUFK1V122( )
EEUFK1V122S( )
EEUFK1V152L
EEUFK1V182L
EEUFK1V182S( )
EEUFK1V222L
EEUFK1V222( )
EEUFK1V222S( )
EEUFK1V332S( )
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
200
200
200
200
200
100
100
200
100
100
100
100
100
100
100
100
1000
1000
500
1000
500
500
500
500
500
250
500
250
250
250
250
250
· When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2014
– EEE-77 –
Aluminum Electrolytic Capacitors/ FM
Radial Lead Type
Series:
FM
Type:
A
■ Features
● Low impedance (40 % to 70 % less than FC Series)
● Endurance : 2000 h to 7000 h at +105 °C
● RoHS directive compliant
■ Attention
Not applicable for automotive
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan d
Endurance
–40 °C to +105 °C
6.3 V.DC to 50 V.DC
22 μF to 6800 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV (μA) After 2 minutes
W.V.
6.3
10
16
25
35
50
(max.) (120 Hz/+20 °C)
tan d
0.22 0.19 0.16 0.14 0.12 0.10
Add 0.02 per 1000 μF for products of 1000 μF or more.
After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits speciﬁed below.
Duration
05 to 06.3 : 2000 hours, 08×11.5 to 08×15: 3000 hours
08×20 to 010×16 : 4000 hours, 010×20 to 012.5×20/ 016×20: 5000 hours
012.5×25 to 012.5×35/ 016×25 : 7000 hours
Capacitance change ±25 % of initial measured value (6.3 V to 10 V : ±30 %)
tan d
< 200 % of initial speciﬁed value
DC leakage current < initial speciﬁed value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits speciﬁed in Endurance. (With voltage treatment)
Shelf Life
■ Frequency correction factor for ripple current
W.V.(V.DC)
6.3 to 50
Frequency (Hz)
Cap (μF)
22
to
60
120
1k
10 k
100 k
33
0.45
0.55
0.75
0.90
1.00
47
to
330
0.60
0.70
0.85
0.95
1.00
390
to
1000
0.65
0.75
0.90
0.98
1.00
1200
to
6800
0.75
0.80
0.95
1.00
1.00
■ Dimensions in mm (not to scale)
fd±0.05
(Unit : mm)
Sleeve
Pressure relief
06.3
08
010
+
L=
14 min.
0D±0.5
3 min.
F±0.5
–
0D±0.5
= L16
: L±1.5
L20 : L±2.0
Body Dia. 0D
5
6.3
8
10
12.5
16
Body Length L
—
—
—
—
12.5 to 25
30 to 40
—
Lead Dia. 0d
0.5
0.5
0.6
0.6
0.6
0.8
0.8
Lead space F
2.0
2.5
3.5
5.0
5.0
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2014
– EEE-78 –
Aluminum Electrolytic Capacitors/ FM
■ Case size/Impedance/Ripple current
6.3 V to 35 V
W.V.(V.DC)
Case size
(0D×L)
Impedance
(Ω/100 kHz)
50 V
Ripple Current
(mA r.m.s./100 kHz)
+105 °C
Impedance
(Ω/100 kHz)
Ripple Current
(mA r.m.s./100 kHz)
+20 °C
–10 °C
+20 °C
–10 °C
5
× 11
0.300
1.000
280
0.340
1.130
+105 °C
250
6.3
× 11.2
0.130
0.430
455
0.140
0.460
405
8
× 11.5
0.056
0.168
950
0.061
0.183
870
8
× 15
0.041
0.123
1240
0.045
0.135
1140
8
× 20
0.030
0.090
1560
0.033
0.099
1430
10
× 12.5
0.038
0.114
1290
0.042
0.126
1170
10
× 16
0.026
0.078
1790
0.030
0.090
1650
10
× 20
0.019
0.057
2180
0.023
0.069
1890
10
× 25
0.018
0.054
2470
0.022
0.066
2150
12.5 × 20
0.018
0.045
2600
0.022
0.055
2260
12.5 × 25
0.015
0.038
3190
0.018
0.045
2660
12.5 × 30
0.013
0.033
3630
0.016
0.040
3160
12.5 × 35
0.012
0.030
3750
0.014
0.035
3270
16
× 20
0.017
0.043
3300
0.019
0.048
2870
16
× 25
0.014
0.035
3820
0.016
0.040
3320
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2014
– EEE-79 –
Aluminum Electrolytic Capacitors/ FM
■ Standard Products
Case size
Speciﬁcation
Lead Length
Ripple
ImpedEndurLead
Lead Space
Cap.
W.V.
(±20 %) Dia. Length Current ance ance Dia.
Taping Taping
(100 kHz) (100 kHz)
Straight
✽B
✽H
(+105 °C) (+20 °C)
(V)
(μF) (mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm)
150
330
560
820
1000
1200
6.3
1500
2200
3300
3900
4700
5600
6800
100
220
470
680
1000
10
1200
1500
2200
3300
3900
4700
5600
68
120
330
470
680
16
1000
1200
1500
2200
2700
3300
3900
5
6.3
8
8
10
8
10
10
10
12.5
12.5
12.5
12.5
16
16
5
6.3
8
8
10
8
10
10
10
12.5
12.5
12.5
16
12.5
16
5
6.3
8
8
10
8
10
10
10
12.5
12.5
12.5
16
12.5
16
11
11.2
11.5
15
12.5
20
16
20
25
20
25
30
35
20
25
11
11.2
11.5
15
12.5
20
16
20
25
20
25
30
20
35
25
11
11.2
11.5
15
12.5
20
16
20
25
20
25
30
20
35
25
280
455
950
1240
1290
1560
1790
2180
2470
2600
3190
3630
3750
3300
3820
280
455
950
1240
1290
1560
1790
2180
2470
2600
3190
3630
3300
3750
3820
280
455
950
1240
1290
1560
1790
2180
2470
2600
3190
3630
3300
3750
3820
0.300
0.130
0.056
0.041
0.038
0.030
0.026
0.019
0.018
0.018
0.015
0.013
0.012
0.017
0.014
0.300
0.130
0.056
0.041
0.038
0.030
0.026
0.019
0.018
0.018
0.015
0.013
0.017
0.012
0.014
0.300
0.130
0.056
0.041
0.038
0.030
0.026
0.019
0.018
0.018
0.015
0.013
0.017
0.012
0.014
2000
2000
3000
3000
4000
4000
4000
5000
5000
5000
7000
7000
7000
5000
7000
2000
2000
3000
3000
4000
4000
4000
5000
5000
5000
7000
7000
5000
7000
7000
2000
2000
3000
3000
4000
4000
4000
5000
5000
5000
7000
7000
5000
7000
7000
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
2.0
2.5
3.5
3.5
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
2.0
2.5
3.5
3.5
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
2.0
2.5
3.5
3.5
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
2.5
2.5
2.5
2.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
2.5
2.5
Min. Packaging Q'ty
Part No.
EEUFM0J151( )
EEUFM0J331( )
EEUFM0J561( )
EEUFM0J821L( )
EEUFM0J102( )
EEUFM0J122L( )
EEUFM0J122( )
EEUFM0J152( )
EEUFM0J222L( )
EEUFM0J332( )
EEUFM0J392( )
EEUFM0J472L
EEUFM0J562L
EEUFM0J562S( )
EEUFM0J682( )
EEUFM1A101( )
EEUFM1A221( )
EEUFM1A471( )
EEUFM1A681L( )
EEUFM1A681( )
EEUFM1A102L( )
EEUFM1A102( )
EEUFM1A122( )
EEUFM1A152L( )
EEUFM1A222( )
EEUFM1A332( )
EEUFM1A392L
EEUFM1A392S( )
EEUFM1A472L
EEUFM1A562( )
EEUFM1C680( )
EEUFM1C121( )
EEUFM1C331( )
EEUFM1C471L( )
EEUFM1C471( )
EEUFM1C681L( )
EEUFM1C681( )
EEUFM1C102( )
EEUFM1C122L( )
EEUFM1C152( )
EEUFM1C222( )
EEUFM1C272L
EEUFM1C272S( )
EEUFM1C332L
EEUFM1C392( )
Long
Taping
Lead
(pcs)
(pcs)
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
2000
2000
1000
1000
500
1000
500
500
500
500
500
250
250
2000
2000
1000
1000
500
1000
500
500
500
500
500
250
250
2000
2000
1000
1000
500
1000
500
500
500
500
500
250
250
· When requesting taped product, please put the letter "B" of "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2014
– EEE-80 –
Aluminum Electrolytic Capacitors/ FM
■ Standard Products
Case size
Speciﬁcation
Lead Length
Ripple
ImpedEndurLead
Lead Space
Cap.
W.V.
(±20 %) Dia. Length Current ance ance Dia.
Taping Taping
(100 kHz) (100 kHz)
Straight
✽B
✽H
(+105 °C) (+20 °C)
(V)
(μF) (mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm)
47
100
220
330
470
25
680
820
1000
1500
1800
2200
2700
33
68
150
220
330
35
470
560
680
1000
1200
50
1500
1800
22
56
100
120
150
180
220
270
330
470
560
680
820
1000
5
6.3
8
8
10
8
10
10
10
12.5
12.5
12.5
16
12.5
16
5
6.3
8
8
10
8
10
10
10
12.5
12.5
12.5
16
12.5
16
5
6.3
8
8
10
8
10
10
10
12.5
12.5
12.5
12.5
16
16
11
11.2
11.5
15
12.5
20
16
20
25
20
25
30
20
35
25
11
11.2
11.5
15
12.5
20
16
20
25
20
25
30
20
35
25
11
11.2
11.5
15
12.5
20
16
20
25
20
25
30
35
20
25
280
455
950
1240
1290
1560
1790
2180
2470
2600
3190
3630
3300
3750
3820
280
455
950
1240
1290
1560
1790
2180
2470
2600
3190
3630
3300
3750
3820
250
405
870
1140
1170
1430
1650
1890
2150
2260
2660
3160
3270
2870
3320
0.300
0.130
0.056
0.041
0.038
0.030
0.026
0.019
0.018
0.018
0.015
0.013
0.017
0.012
0.014
0.300
0.130
0.056
0.041
0.038
0.030
0.026
0.019
0.018
0.018
0.015
0.013
0.017
0.012
0.014
0.340
0.140
0.061
0.045
0.042
0.033
0.030
0.023
0.022
0.022
0.018
0.016
0.014
0.019
0.016
2000
2000
3000
3000
4000
4000
4000
5000
5000
5000
7000
7000
5000
7000
7000
2000
2000
3000
3000
4000
4000
4000
5000
5000
5000
7000
7000
5000
7000
7000
2000
2000
3000
3000
4000
4000
4000
5000
5000
5000
7000
7000
7000
5000
7000
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
2.0
2.5
3.5
3.5
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
2.0
2.5
3.5
3.5
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
2.0
2.5
3.5
3.5
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
2.5
2.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
2.5
2.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
2.5
2.5
Min. Packaging Q'ty
Part No.
EEUFM1E470( )
EEUFM1E101( )
EEUFM1E221( )
EEUFM1E331L( )
EEUFM1E331( )
EEUFM1E471L( )
EEUFM1E471( )
EEUFM1E681( )
EEUFM1E821L( )
EEUFM1E102( )
EEUFM1E152( )
EEUFM1E182L
EEUFM1E182S( )
EEUFM1E222L
EEUFM1E272( )
EEUFM1V330( )
EEUFM1V680( )
EEUFM1V151( )
EEUFM1V221L( )
EEUFM1V221( )
EEUFM1V331L( )
EEUFM1V331( )
EEUFM1V471( )
EEUFM1V561L( )
EEUFM1V681( )
EEUFM1V102( )
EEUFM1V122L
EEUFM1V122S( )
EEUFM1V152L
EEUFM1V182( )
EEUFM1H220( )
EEUFM1H560( )
EEUFM1H101( )
EEUFM1H121L( )
EEUFM1H151( )
EEUFM1H181L( )
EEUFM1H221( )
EEUFM1H271( )
EEUFM1H331L( )
EEUFM1H471( )
EEUFM1H561( )
EEUFM1H681L
EEUFM1H821L
EEUFM1H821S( )
EEUFM1H102( )
Long
Taping
Lead
(pcs)
(pcs)
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
2000
2000
1000
1000
500
1000
500
500
500
500
500
250
250
2000
2000
1000
1000
500
1000
500
500
500
500
500
250
250
2000
2000
1000
1000
500
1000
500
500
500
500
500
250
250
· When requesting taped product, please put the letter "B" of "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2014
– EEE-81 –
Aluminum Electrolytic Capacitors/ FR
Radial Lead Type
Series:
FR
Type:
A
■ Features
■ Country of origin
● Low ESR (Same as FM Series)
● Endurance : 5000 h to 10000 h at +105 °C
● RoHS directive compliant
Malaysia
■ Attention
Not applicable for automotive
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan d
–40 °C to +105 °C
6.3 V.DC to 100 V.DC
4.7 μF to 8200 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV (μA) After 2 minutes
W.V.
6.3
10
16
25
35
50
63
tan d
0.22 0.19 0.16 0.14 0.12 0.10 0.09
Add 0.02 per 1000 μF for products of 1000 μF or more.
100
0.08
(120 Hz/+20 °C)
After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits speciﬁed below.
Duration
05×11/ 06.3×11.2 : 5000 hours
08×11.5/ 010×12.5 : 6000 hours (✽ Only EEUFR1V331U (010×12.5) 5000 hours)
08×15/ 010×16 : 8000 hours, 08×20 : 9000 hours
010×20 to 010×25/ 012.5×20 to 012.5×35/ 016×20 to 016×25 : 10000 hours
Endurance
Capacitance change ±25 % of initial measured value (6.3 V to 10 V : ±30 %)
tan d
< 200 % of initial speciﬁed value
DC leakage current
< initial speciﬁed value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits speciﬁed in Endurance. (With voltage treatment)
Shelf Life
■ Frequency correction factor for ripple current
W.V.(V.DC)
4.7
6.3 to 100
Frequency (Hz)
Cap (μF)
47
60
120
1k
10 k
100 k
to
33
0.45
0.55
0.75
0.90
1.00
to
330
0.60
0.70
0.85
0.95
1.00
390
to
1000
0.65
0.75
0.90
0.98
1.00
1200
to
8200
0.75
0.80
0.95
1.00
1.00
■ Dimensions in mm (not to scale)
fd±0.05
Sleeve
Pressure relief
06.3
(Unit : mm)
08
010
+
L=
14 min.
0D±0.5
3 min.
F±0.5
–
0D±0.5
= L16
: L±1.5
L20 : L±2.0
Body Dia. 0D
5
6.3
8
10
12.5
16
Body Length L
—
—
—
—
12.5 to 25
30 to 35
—
Lead Dia. 0d
0.5
0.5
0.6
0.6
0.6
0.8
0.8
Lead space F
2.0
2.5
3.5
5.0
5.0
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
06 Nov. 2014
– EEE-82 –
Aluminum Electrolytic Capacitors/ FR
■ Case size/Impedance/Ripple current
6.3 V to 35 V
W.V.(V.DC)
Case size
(0D×L)
Impedance
(Ω/100 kHz)
50 V
Ripple Current
(mA r.m.s./100 kHz)
+105 °C
Impedance
(Ω/100 kHz)
Ripple Current
(mA r.m.s./100 kHz)
+20 °C
–10 °C
+20 °C
–10 °C
5
× 11
0.300
1.000
280
0.340
1.130
+105 °C
250
6.3
× 11.2
0.130
0.430
455
0.140
0.460
405
8
× 11.5
0.056
0.168
950
0.061
0.183
870
8
× 15
0.041
0.123
1240
0.045
0.135
1140
8
× 20
0.030
0.090
1560
0.033
0.099
1430
10
× 12.5
0.043
0.114
1290
0.042
0.126
1170
10
× 16
0.028
0.078
1790
0.030
0.090
1650
10
× 20
0.020
0.057
2180
0.023
0.069
1890
10
× 25
0.018
0.054
2470
0.022
0.066
2150
12.5 × 20
0.018
0.045
2600
0.022
0.055
2260
12.5 × 25
0.015
0.038
3190
0.018
0.045
2660
12.5 × 30
0.013
0.033
3630
0.016
0.040
3160
12.5 × 35
0.012
0.030
3750
0.014
0.035
3270
16
× 20
0.017
0.043
3300
0.019
0.048
2870
16
× 25
0.014
0.035
3820
0.016
0.040
3320
63 V
W.V.(V.DC)
Case size
(0D×L)
Impedance
(Ω/100 kHz)
Ripple Current
(mA r.m.s./100 kHz)
+20 °C
–10 °C
0.510
2.040
+105 °C
5
× 11
6.3
× 11.2
0.210
0.840
284
8
× 11.5
0.092
0.368
566
8
× 15
0.068
0.272
741
8
× 20
0.050
0.200
930
10
× 12.5
0.063
0.252
761
10
× 16
0.045
0.180
1073
10
× 20
0.035
0.140
1229
10
× 25
0.033
0.132
1500
12.5 × 20
0.033
0.125
1582
12.5 × 25
0.027
0.092
1995
12.5 × 30
0.024
0.082
2528
12.5 × 35
0.021
0.071
2780
16
× 20
0.029
0.093
2153
16
× 25
0.024
0.074
2988
100 V
W.V.(V.DC)
Case size
(0D×L)
10
× 20
175
Impedance
(Ω/100 kHz)
Ripple Current
(mA r.m.s./100 kHz)
+20 °C
–10 °C
+105 °C
0.084
0.336
1500
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
06 Nov. 2014
– EEE-83 –
Aluminum Electrolytic Capacitors/ FR
■ Standard Products
Case size
W.V.
Cap.
(±20 %)
(V)
(μF)
150
220
330
470
820
1000
1200
6.3
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
100
150
220
270
470
680
820
1000
10
1500
1800
2200
3300
3900
4700
5600
6800
Speciﬁcation
Lead Length
Ripple Imped- Endur- Lead
Lead Space
Current ance ance
Dia.
Dia. Length
Taping Taping
(100 kHz) (100 kHz)
Straight
✽B
✽H
(+105 °C) (+20 °C)
(mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm)
5
6.3
6.3
6.3
8
8
8
10
8
10
10
10
10
12.5
12.5
12.5
12.5
16
16
5
5
6.3
6.3
8
8
10
10
8
8
10
10
10
12.5
12.5
12.5
16
12.5
12.5
16
11
11.2
11.2
11.2
11.5
11.5
15
12.5
20
16
20
25
25
20
25
30
35
20
25
11
11
11.2
11.2
11.5
11.5
12.5
16
15
20
16
20
25
20
25
30
20
35
35
25
280
455
455
455
950
950
1240
1290
1560
1790
2180
2470
2470
2600
3190
3630
3750
3300
3820
280
280
455
455
950
950
1290
1790
1240
1560
1790
2180
2470
2600
3190
3630
3300
3750
3750
3820
0.300
0.130
0.130
0.130
0.056
0.056
0.041
0.043
0.030
0.028
0.020
0.018
0.018
0.018
0.015
0.013
0.012
0.017
0.014
0.300
0.300
0.130
0.130
0.056
0.056
0.043
0.028
0.041
0.030
0.028
0.020
0.018
0.018
0.015
0.013
0.017
0.012
0.012
0.014
5000
5000
5000
5000
6000
6000
8000
6000
9000
8000
10000
10000
10000
10000
10000
10000
10000
10000
10000
5000
5000
5000
5000
6000
6000
6000
8000
8000
9000
8000
10000
10000
10000
10000
10000
10000
10000
10000
10000
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
2.0
2.5
2.5
2.5
3.5
3.5
3.5
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
2.0
2.0
2.5
2.5
3.5
3.5
5.0
5.0
3.5
3.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
5.0
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Min. Packaging Q'ty
Part No.
Straight
Taping
Leads
(pcs) (pcs)
EEUFR0J151( )
EEUFR0J221( )
EEUFR0J331( )
EEUFR0J471( )
EEUFR0J821( )
EEUFR0J102( )
EEUFR0J122L( )
EEUFR0J122( )
EEUFR0J152L( )
EEUFR0J182( )
EEUFR0J222( )
EEUFR0J272L( )
EEUFR0J332L( )
EEUFR0J392( )
EEUFR0J472( )
EEUFR0J562L
EEUFR0J682L
EEUFR0J682S( )
EEUFR0J822( )
EEUFR1A101( )
EEUFR1A151( )
EEUFR1A221( )
EEUFR1A271( )
EEUFR1A471( )
EEUFR1A681( )
EEUFR1A821( )
EEUFR1A102( )
EEUFR1A102L( )
EEUFR1A152L( )
EEUFR1A152( )
EEUFR1A182( )
EEUFR1A222L( )
EEUFR1A332( )
EEUFR1A392( )
EEUFR1A472L
EEUFR1A472S( )
EEUFR1A562L
EEUFR1A682L
EEUFR1A682( )
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
100
2000
2000
2000
2000
1000
1000
1000
500
1000
500
500
500
500
500
500
250
250
2000
2000
2000
2000
1000
1000
500
500
1000
1000
500
500
500
500
500
250
250
· When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
06 Nov. 2014
– EEE-84 –
Aluminum Electrolytic Capacitors/ FR
■ Standard Products
Case size
W.V.
Cap.
(±20 %)
(V)
(μF)
68
100
120
220
470
680
1000
16
1500
1800
2200
2700
3300
3900
4700
5600
47
68
100
150
220
330
390
470
560
25
680
820
1000
1200
1500
1800
2200
2700
3300
Speciﬁcation
Lead Length
Ripple Imped- Endur- Lead
Lead Space
Current ance ance
Dia.
Dia. Length
Taping Taping
(100 kHz) (100 kHz)
Straight
✽B
✽H
(+105 °C) (+20 °C)
(mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm)
5
5
6.3
6.3
8
8
10
8
10
10
10
10
12.5
12.5
12.5
16
12.5
16
12.5
16
16
5
5
6.3
6.3
8
8
8
8
8
10
8
8
10
10
10
10
10
12.5
12.5
16
12.5
16
12.5
16
16
11
11
11.2
11.2
11.5
15
12.5
20
16
20
25
25
20
25
30
20
35
20
35
25
25
11
11
11.2
11.2
11.5
11.5
15
15
20
12.5
20
20
16
20
20
25
25
20
25
20
30
20
35
20
25
280
280
455
455
950
1240
1290
1560
1790
2180
2470
2470
2600
3190
3630
3300
3750
3300
3750
3820
3820
280
280
455
455
950
950
1240
1240
1560
1290
1560
1560
1790
2180
2180
2470
2470
2600
3190
3300
3630
3300
3750
3300
3820
0.300
0.300
0.130
0.130
0.056
0.041
0.043
0.030
0.028
0.020
0.018
0.018
0.018
0.015
0.013
0.017
0.012
0.017
0.012
0.014
0.014
0.300
0.300
0.130
0.130
0.056
0.056
0.041
0.041
0.030
0.043
0.030
0.030
0.028
0.020
0.020
0.018
0.018
0.018
0.015
0.017
0.013
0.017
0.012
0.017
0.014
5000
5000
5000
5000
6000
8000
6000
9000
8000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
5000
5000
5000
5000
6000
6000
8000
8000
9000
6000
9000
9000
8000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
2.0
2.0
2.5
2.5
3.5
3.5
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
7.5
7.5
2.0
2.0
2.5
2.5
3.5
3.5
3.5
3.5
3.5
5.0
3.5
3.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
2.5
2.5
2.5
2.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
2.5
2.5
2.5
2.5
Min. Packaging Q'ty
Part No.
Straight
Taping
Leads
(pcs) (pcs)
EEUFR1C680( )
EEUFR1C101( )
EEUFR1C121( )
EEUFR1C221( )
EEUFR1C471( )
EEUFR1C681L( )
EEUFR1C681( )
EEUFR1C102L( )
EEUFR1C102( )
EEUFR1C152( )
EEUFR1C152L( )
EEUFR1C182L( )
EEUFR1C222( )
EEUFR1C272( )
EEUFR1C332L
EEUFR1C332S( )
EEUFR1C392L
EEUFR1C392S( )
EEUFR1C472L
EEUFR1C472( )
EEUFR1C562( )
EEUFR1E470( )
EEUFR1E680( )
EEUFR1E101( )
EEUFR1E151( )
EEUFR1E221( )
EEUFR1E331( )
EEUFR1E391L( )
EEUFR1E471Y( )
EEUFR1E471L( )
EEUFR1E471( )
EEUFR1E561L( )
EEUFR1E681L( )
EEUFR1E681( )
EEUFR1E821( )
EEUFR1E102( )
EEUFR1E102L( )
EEUFR1E122L( )
EEUFR1E152( )
EEUFR1E182( )
EEUFR1E182S( )
EEUFR1E222L
EEUFR1E222S( )
EEUFR1E272L
EEUFR1E272S( )
EEUFR1E332( )
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
100
100
2000
2000
2000
2000
1000
1000
500
1000
500
500
500
500
500
500
250
250
250
250
2000
2000
2000
2000
1000
1000
1000
1000
1000
500
1000
1000
500
500
500
500
500
500
500
250
250
250
250
· When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
06 Nov. 2014
– EEE-85 –
Aluminum Electrolytic Capacitors/ FR
■ Standard Products
Case size
W.V.
(V)
35
50
63
100
Speciﬁcation
Lead Length
Ripple
ImpedEndurLead
Lead Space
Cap.
Dia.
(±20 %) Dia. Length Current ance ance
Taping Taping
(100 kHz) (100 kHz)
Straight
✽B
✽H
(+105 °C) (+20 °C)
(μF)
(mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm)
33
5
11
280 0.300 5000
0.5
2.0
5.0
2.5
68
6.3
11.2
455 0.130 5000
0.5
2.5
5.0
2.5
100
8
11.5
950 0.056 6000
0.6
3.5
5.0
180
8
11.5
950 0.056 6000
0.6
3.5
5.0
220
8
11.5
950 0.056 6000
0.6
3.5
5.0
8
15
1240 0.041 8000
0.6
3.5
5.0
270
10
12.5
1290 0.043 6000
0.6
5.0
5.0
330 10
12.5
1330 0.043 5000
0.6
5.0
5.0
390
8
20
1560 0.030 9000
0.6
3.5
5.0
8
20
1560 0.030 9000
0.6
3.5
5.0
470
10
16
1790 0.028 8000
0.6
5.0
5.0
560 10
20
2180 0.020 10000
0.6
5.0
5.0
10
20
2180 0.020 10000
0.6
5.0
5.0
680
10
25
2470 0.018 10000
0.6
5.0
5.0
820 10
25
2470 0.018 10000
0.6
5.0
5.0
1000 12.5
20
2600 0.018 10000
0.6
5.0
5.0
1200 12.5
25
3190 0.015 10000
0.6
5.0
5.0
12.5
30
3630 0.013 10000
0.8
5.0
1500
16
20
3300 0.017 10000
0.8
7.5
7.5
12.5
35
3750 0.012 10000
0.8
5.0
1800
16
25
3820 0.014 10000
0.8
7.5
7.5
12.5
35
3750 0.012 10000
0.8
5.0
2200
16
25
3820 0.014 10000
0.8
7.5
7.5
4.7
5
11
185 0.620 5000
0.5
2.0
5.0
2.5
10
5
11
250 0.340 5000
0.5
2.0
5.0
2.5
22
5
11
250 0.340 5000
0.5
2.0
5.0
2.5
47
6.3
11.2
405 0.140 5000
0.5
2.5
5.0
56
6.3
11.2
405 0.140 5000
0.5
2.5
5.0
2.5
100
8
11.5
870 0.061 6000
0.6
3.5
5.0
120
8
15
1140 0.045 8000
0.6
3.5
5.0
150 10
12.5
1170 0.042 6000
0.6
5.0
5.0
180
8
20
1430 0.033 9000
0.6
3.5
5.0
220 10
16
1650 0.030 8000
0.6
5.0
5.0
270 10
20
1890 0.023 10000
0.6
5.0
5.0
330 10
25
2150 0.022 10000
0.6
5.0
5.0
470 12.5
20
2260 0.022 10000
0.6
5.0
5.0
560 12.5
25
2660 0.018 10000
0.6
5.0
5.0
680 12.5
30
3160 0.016 10000
0.8
5.0
12.5
35
3270 0.014 10000
0.8
5.0
820
16
20
2870 0.019 10000
0.8
7.5
7.5
1000 16
25
3320 0.016 10000
0.8
7.5
7.5
18
5
11
175 0.510 5000
0.5
2.0
5.0
2.5
47
6.3
11.2
284 0.210 5000
0.5
2.5
5.0
2.5
82
8
11.5
566 0.092 6000
0.6
3.5
5.0
8
15
741 0.068 8000
0.6
3.5
5.0
100
10
12.5
761 0.063 6000
0.6
5.0
5.0
8
20
930 0.050 9000
0.6
3.5
5.0
120
10
16
1073 0.045 8000
0.6
5.0
5.0
8
20
930 0.050 9000
0.6
3.5
5.0
150
10
16
1073 0.045 8000
0.6
5.0
5.0
180 10
20
1229 0.035 10000
0.6
5.0
5.0
220 10
25
1500 0.033 10000
0.6
5.0
5.0
10
20
1229 0.035 10000
0.6
5.0
5.0
270 10
25
1500 0.033 10000
0.6
5.0
5.0
12.5
20
1582 0.033 10000
0.6
5.0
5.0
330 12.5
20
1582 0.033 10000
0.6
5.0
5.0
390 12.5
25
1995 0.027 10000
0.6
5.0
5.0
470 12.5
25
1995 0.027 10000
0.6
5.0
5.0
12.5
30
2528 0.024 10000
0.8
5.0
560
16
20
2153 0.029 10000
0.8
7.5
7.5
680 12.5
35
2780 0.021 10000
0.8
5.0
820 16
25
2988 0.024 10000
0.8
7.5
7.5
100 10
20
1500 0.084 10000
0.6
5.0
5.0
Min. Packaging Q'ty
Part No.
EEUFR1V330( )
EEUFR1V680( )
EEUFR1V101( )
EEUFR1V181( )
EEUFR1V221( )
EEUFR1V271L( )
EEUFR1V271( )
EEUFR1V331U( )
EEUFR1V391L( )
EEUFR1V471L( )
EEUFR1V471( )
EEUFR1V561( )
EEUFR1V681( )
EEUFR1V681L( )
EEUFR1V821L( )
EEUFR1V102( )
EEUFR1V122( )
EEUFR1V152L
EEUFR1V152S( )
EEUFR1V182L
EEUFR1V182( )
EEUFR1V222L
EEUFR1V222( )
EEUFR1H4R7( )
EEUFR1H100( )
EEUFR1H220( )
EEUFR1H470( )
EEUFR1H560( )
EEUFR1H101( )
EEUFR1H121L( )
EEUFR1H151( )
EEUFR1H181L( )
EEUFR1H221( )
EEUFR1H271( )
EEUFR1H331L( )
EEUFR1H471( )
EEUFR1H561( )
EEUFR1H681L
EEUFR1H821L
EEUFR1H821S( )
EEUFR1H102( )
EEUFR1J180( )
EEUFR1J470( )
EEUFR1J820( )
EEUFR1J101L( )
EEUFR1J101( )
EEUFR1J121L( )
EEUFR1J121( )
EEUFR1J151L( )
EEUFR1J151( )
EEUFR1J181( )
EEUFR1J221L( )
EEUFR1J271U( )
EEUFR1J271L( )
EEUFR1J271( )
EEUFR1J331( )
EEUFR1J391( )
EEUFR1J471( )
EEUFR1J561L
EEUFR1J561S( )
EEUFR1J681L
EEUFR1J821( )
EEUFR2A101( )
Straight
Taping
Leads
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
200
(pcs)
2000
2000
1000
1000
1000
1000
500
500
1000
1000
500
500
500
500
500
500
500
250
250
250
2000
2000
2000
2000
2000
1000
1000
500
1000
500
500
500
500
500
250
250
2000
2000
1000
1000
500
1000
500
1000
500
500
500
500
500
500
500
500
500
250
250
500
· When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
06 Nov. 2014
– EEE-86 –
Aluminum Electrolytic Capacitors/ EB
Radial Lead Type
Series:
EB
Type:
A
■ Features
● Endurance : +105 °C 5000 h to 10000 h
● Hight ripple hight frequency (Hight Voltage)
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
–40 °C to +105 °C
10 V.DC to 63 V.DC
2.2 μF to 3300 μF
–25 °C to +105 °C
160 V.DC to 450 V.DC
10 μF to 330 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA)
After 2 minutes application of rated working voltage at +20 °C (Whichever is greater)
DC Leakage Current
tan d
Please see the attached standard products list
After following life test with DC voltage and +105 °C±2 °C ripple current value applied
(The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when
the capacitors are restord to 20 °C, the capacitors shall meet the limits specified below.
(10 to 63 V.DC)
Duration : 05×11 to 08×11.5 : 5000 hours 08×15 to 012.5×25 : 10000 hours
Capacitance change
tan d
DC leakage current
Endurance
±30 % of initial measured value
< 300 % of initial speciﬁed value
< initial speciﬁed value
(160 to 450 V.DC)
Duration : 5000 hours
Capacitance change ±20 % of initial measured value
tan d
< 200 % of initial speciﬁed value
DC leakage current
< initial speciﬁed value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits speciﬁed in Endurance. (With voltage treatment)
Shelf Life
■ Frequency correction factor for ripple current
(10 ~ 63 V.DC)
Frequency (Hz)
2.2
22
1000
to
10
to
470
to 3300
Frequency (Hz)
60
120
1k
10 k
100 k
W. V.
(V. DC)
120
1k
0.75
1.00
1.40
1.55
1.65
160 to 250
0.55
0.85
0.90
1.00
0.85
1.00
1.20
1.25
1.30
350 to 450
0.50
0.80
0.90
1.00
0.95
1.00
1.05
1.10
1.15
Capacitance
(μF)
10 k to 30k 30 k to 100k
■ Dimensions in mm (not to scale)
fd±0.05
Sleeve
Pressure relief
06.3
(Unit : mm)
08
010
+
L=
14 min.
0D±0.5
3 min.
F±0.5
–
0D±0.5
=L16 : L±1.0 (08L15 only L±1.5)
L20 : L±2.0
Body Dia. 0D
Lead Dia. 0d
Lead space F
5
0.5
2.0
6.3
0.5
2.5
8
0.6
3.5
10
0.6
5.0
12.5
0.6
5.0
16
0.8
7.5
18
0.8
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
05 Jun. 2015
– EEE-87 –
Aluminum Electrolytic Capacitors/ EB
■ Standard Products
Endurance : 105 °C 05×11 to 08×11.5=5000 h, 08×15 to 012.5×25=10000 h
Case size
Speciﬁcation
Lead Length
Ripple tan d Endur- Lead
Lead Space
Cap.
W.V.
ance Dia.
(±20 %) Dia. Length Current
Taping Taping
(120 Hz) (120 Hz)
Straight
✽B
✽H
(+105 °C) (+20 °C)
(V)
(μF) (mm) (mm) (mA r.m.s.)
(hours) (mm) (mm) (mm) (mm)
100
5
11
66
0.30
5000 0.5
2.0
5.0
2.5
220
6.3
11.2
100
0.30
5000 0.5
2.5
5.0
2.5
8
15
278
0.30 10000 0.6
3.5
5.0
10
470
8
11.5
180
0.30
5000 0.6
3.5
5.0
2200 12.5 20
540
0.32 10000 0.6
5.0
5.0
3300 12.5 25
802
0.34 10000 0.6
5.0
5.0
1000 10
20
430
0.25 10000 0.6
5.0
5.0
16
2200 12.5 25
706
0.27 10000 0.6
5.0
5.0
47
5
11
55
0.22
5000 0.5
2.0
5.0
2.5
100
6.3
11.2
95
0.22
5000 0.5
2.5
5.0
2.5
220
8
11.5
125
0.22
5000 0.6
3.5
5.0
25
330
8
15
255
0.22 10000 0.6
3.5
5.0
470
10
16
321
0.22 10000 0.6
5.0
5.0
1000 12.5 20
498
0.22 10000 0.6
5.0
5.0
33
5
11
46
0.18
5000 0.5
2.0
5.0
2.5
220
8
15
197
0.18 10000 0.6
3.5
5.0
330 10
16
278
0.18 10000 0.6
5.0
5.0
35
470
10
20
349
0.18 10000 0.6
5.0
5.0
1000 12.5 25
586
0.18 10000 0.6
5.0
5.0
2.2
5
11
15
0.15
5000 0.5
2.0
5.0
2.5
3.3
5
11
18
0.15
5000 0.5
2.0
5.0
2.5
4.7
5
11
18
0.15
5000 0.5
2.0
5.0
2.5
10
5
11
27
0.15
5000 0.5
2.0
5.0
2.5
22
5
11
39
0.15
5000 0.5
2.0
5.0
2.5
50
47
6.3
11.2
61
0.15
5000 0.5
2.5
5.0
2.5
100
8
11.5
99
0.15
5000 0.6
3.5
5.0
220 10
16
234
0.15 10000 0.6
5.0
5.0
330 10
20
293
0.15 10000 0.6
5.0
5.0
470
12.5 20
370
0.15 10000 0.6
5.0
5.0
2.2
5
11
16.5
0.12
5000 0.5
2.0
5.0
2.5
3.3
5
11
20
0.12
5000 0.5
2.0
5.0
2.5
4.7
5
11
23
0.12
5000 0.5
2.0
5.0
2.5
10
5
11
30
0.12
5000 0.5
2.0
5.0
2.5
22
6.3
11.2
40
0.12
5000 0.5
2.5
5.0
2.5
33
6.3
11.2
50
0.12
5000 0.5
2.5
5.0
2.5
63
8
15
94
0.12 10000 0.6
3.5
5.0
47
8
11.5
80
0.12
5000 0.6
3.5
5.0
100
8
15
180
0.12 10000 0.6
3.5
5.0
220 10
20
292
0.12 10000 0.6
5.0
5.0
330
12.5 20
381
0.12 10000 0.6
5.0
5.0
470
12.5 25
454
0.12 10000 0.6
5.0
5.0
Min. Packaging Q'ty
Part No.
EEUEB1A101S( )
EEUEB1A221S( )
EEUEB1A471( )
EEUEB1A471S( )
EEUEB1A222( )
EEUEB1A332( )
EEUEB1C102( )
EEUEB1C222( )
EEUEB1E470S( )
EEUEB1E101S( )
EEUEB1E221S( )
EEUEB1E331( )
EEUEB1E471( )
EEUEB1E102( )
EEUEB1V330S( )
EEUEB1V221( )
EEUEB1V331( )
EEUEB1V471( )
EEUEB1V102( )
EEUEB1H2R2S( )
EEUEB1H3R3S( )
EEUEB1H4R7S( )
EEUEB1H100S( )
EEUEB1H220S( )
EEUEB1H470S( )
EEUEB1H101S( )
EEUEB1H221( )
EEUEB1H331( )
EEUEB1H471( )
EEUEB1J2R2S( )
EEUEB1J3R3S( )
EEUEB1J4R7S( )
EEUEB1J100S( )
EEUEB1J220S( )
EEUEB1J330S( )
EEUEB1J470( )
EEUEB1J470S( )
EEUEB1J101( )
EEUEB1J221( )
EEUEB1J331( )
EEUEB1J471( )
Straight
Taping
Leads
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
(pcs)
2000
2000
1000
1000
500
500
500
500
2000
2000
1000
1000
500
500
2000
1000
500
500
500
2000
2000
2000
2000
2000
2000
1000
500
500
500
2000
2000
2000
2000
2000
2000
1000
1000
1000
500
500
500
· When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
05 Jun. 2015
– EEE-88 –
Aluminum Electrolytic Capacitors/ EB
■ Standard Products
Endurance : 105 °C 5000 h
Case size
W.V.
(V)
Cap.
(±20 %)
(μF)
22
33
47
68
160
100
150
220
330
22
33
47
68
200
100
150
220
22
33
47
250
68
100
150
10
22
33
350
47
68
100
10
22
400
33
47
10
22
450
33
47
Dia.
(mm)
10
10
12.5
12.5
16
16
18
16
18
16
18
18
10
12.5
12.5
12.5
16
16
18
16
18
18
12.5
12.5
12.5
16
16
18
16
18
18
10
12.5
16
16
18
16
18
18
10
12.5
16
16
18
16
18
12.5
16
18
16
18
18
Speciﬁcation
Ripple tan d EndurCurrent
ance
Length
(100 kHz) (120 Hz)
(+105 °C) (+20 °C)
(mm) (mA r.m.s.)
(hours)
20
470
0.15
5000
20
470
0.15
5000
20
600
0.15
5000
25
750
0.15
5000
20
750
0.15
5000
25
1060
0.15
5000
20
1060
0.15
5000
31.5
1280
0.15
5000
25
1280
0.15
5000
31.5
1280
0.15
5000
25
1280
0.15
5000
31.5
1690
0.15
5000
20
470
0.15
5000
20
600
0.15
5000
20
600
0.15
5000
25
750
0.15
5000
20
750
0.15
5000
25
1060
0.15
5000
20
1060
0.15
5000
31.5
1280
0.15
5000
25
1280
0.15
5000
31.5
1690
0.15
5000
20
560
0.15
5000
20
560
0.15
5000
25
710
0.15
5000
20
710
0.15
5000
25
990
0.15
5000
20
990
0.15
5000
31.5
1200
0.15
5000
25
1200
0.15
5000
31.5
1470
0.15
5000
20
270
0.20
5000
20
350
0.20
5000
20
480
0.20
5000
25
640
0.20
5000
20
640
0.20
5000
31.5
780
0.20
5000
25
780
0.20
5000
31.5
970
0.20
5000
20
250
0.24
5000
25
410
0.24
5000
20
410
0.24
5000
25
600
0.24
5000
20
600
0.24
5000
31.5
730
0.24
5000
25
730
0.24
5000
20
310
0.24
5000
25
560
0.24
5000
20
560
0.24
5000
31.5
680
0.24
5000
25
680
0.24
5000
31.5
850
0.24
5000
Lead Length
Lead
Lead Space
Dia.
Taping
Straight
✽B
(mm)
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.6
0.8
0.8
0.8
0.8
0.8
(mm)
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
7.5
7.5
7.5
7.5
7.5
5.0
7.5
7.5
7.5
7.5
7.5
(mm)
5.0
5.0
5.0
5.0
7.5
7.5
7.5
–
7.5
–
7.5
–
5.0
5.0
5.0
5.0
7.5
7.5
7.5
–
7.5
–
5.0
5.0
5.0
7.5
7.5
7.5
–
7.5
–
5.0
5.0
7.5
7.5
7.5
–
7.5
–
5.0
5.0
7.5
7.5
7.5
–
7.5
5.0
7.5
7.5
–
7.5
–
Min. Packaging Q'ty
Part No.
EEUEB2C220( )
EEUEB2C330( )
EEUEB2C470( )
EEUEB2C680( )
EEUEB2C680S( )
EEUEB2C101( )
EEUEB2C101S( )
EEUEB2C151
EEUEB2C151S( )
EEUEB2C221
EEUEB2C221S( )
EEUEB2C331
EEUEB2D220( )
EEUEB2D330( )
EEUEB2D470( )
EEUEB2D680( )
EEUEB2D680S( )
EEUEB2D101( )
EEUEB2D101S( )
EEUEB2D151
EEUEB2D151S( )
EEUEB2D221
EEUEB2E220( )
EEUEB2E330( )
EEUEB2E470( )
EEUEB2E470S( )
EEUEB2E680( )
EEUEB2E680S( )
EEUEB2E101
EEUEB2E101S( )
EEUEB2E151
EEUEB2V100( )
EEUEB2V220( )
EEUEB2V330S( )
EEUEB2V470( )
EEUEB2V470S( )
EEUEB2V680
EEUEB2V680S( )
EEUEB2V101
EEUEB2G100( )
EEUEB2G220( )
EEUEB2G220S( )
EEUEB2G330( )
EEUEB2G330S( )
EEUEB2G470
EEUEB2G470S( )
EEUEB2W100( )
EEUEB2W220( )
EEUEB2W220S( )
EEUEB2W330( )
EEUEB2W330S( )
EEUEB2W470
Straight
Taping
Leads
(pcs)
200
200
200
200
100
100
100
100
100
100
100
50
200
200
200
200
100
100
100
100
100
50
200
200
200
100
100
100
100
100
50
200
200
100
100
100
100
100
50
200
200
100
100
100
100
100
200
100
100
100
100
50
(pcs)
500
500
500
500
250
250
250
–
250
–
250
–
500
500
500
500
250
250
250
–
250
–
500
500
500
250
250
250
–
250
–
500
500
250
250
250
–
250
–
500
500
250
250
250
–
250
500
250
250
–
250
–
· When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
05 Jun. 2015
– EEE-89 –
Aluminum Electrolytic Capacitors/ EE
Radial Lead Type
Series:
EE
Type:
A
■ Features
● High ripple current (at high frequency):
40 % higher than ED Series
● Endurance: 105 °C 8000 h to 10000 h
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
–25 °C to + 105 °C
160 V .DC to 450 V .DC
10 μF to 330 μF
±20 % (120 Hz/+20 °C)
I < 0.06 CV +10 (μA) After 2 minutes
W.V.
160 200 250 350 400 450
(120 Hz/+20 °C)
tan d
0.15 0.15 0.15 0.20 0.24 0.24
After following life test with DC voltage and +105 °C±2 °C ripple current value applied
(The sum of DC and ripple peak voltage shall not exceed the rated working voltage),
when the capacitors are restored to 20 °C, the capacitors shall meet the limits speciﬁed below.
Duration
010 : 8000 hours
012.5 to 018 : 10000 hours
Capacitance change ±20 % of initial measured value
tan d
< 200 % of initial speciﬁed value
DC leakage current < initial speciﬁed value
tan d
Endurance
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits speciﬁed in Endurance. (With voltage treatment)
Shelf Life
■ Frequency correction factor for ripple current
W. V.
(V. DC)
160 to 450
Frequency (Hz)
Cap.
(μF)
60 <
120 <
300 <
1k<
10 k <
100 k <
10 to 82
0.25
0.35
0.50
0.65
0.90
1.00
100 to 330
0.30
0.40
0.55
0.70
0.90
1.00
■ Dimensions in mm (not to scale)
Sleeve
Pressure relief
fd±0.05
(Unit : mm)
+
L±2.0
14 min.
3 min.
0D±0.5
F±0.5
–
Body Dia. 0D
10
12.5
16
18
Lead Dia. 0d
0.6
0.6
0.8
0.8
Lead space F
5.0
5.0
7.5
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 May. 2014
– EEE-90 –
Aluminum Electrolytic Capacitors/ EE
■ Case size/Ripple current
160 V
Cap.
(μF)
Case size
(0D×L)
200 V
Ripple current
(mA r.m.s.) 105 °C
Case size
(0D×L)
Ripple current
(mA r.m.s.) 105 °C
120 Hz
100 kHz
120 Hz
100 kHz
22
10
× 20
245
700
10
× 20
300
850
33
10
× 20
280
810
10
× 20
320
920
47
10
× 20
370
1065
68
12.5 × 20
470
1350
82
12.5
12.5
16
16
18
16
18
18
520
660
680
755
730
910
780
1040
1480
1660
1700
1890
1820
2280
1950
2600
12.5
12.5
16
16
16
18
×
×
×
×
×
×
385
465
465
510
690
670
1100
1330
1330
1460
1730
1665
16
× 25
740
1860
18
× 31.5
1175
2600
18
× 40
1250
3120
100
150
220
330
×
×
×
×
×
×
×
×
25
25
20S
25
20S
31.5
25S
31.5
20
25
20S
20S
25
20S
250 V
Cap.
(μF)
Case size
(0D×L)
350 V
Ripple current
(mA r.m.s.) 105 °C
120 Hz
100 kHz
15
22
10
× 20
275
785
33
12.5 × 20
350
995
47
12.5 × 25
16
× 20S
450
490
1290
1400
68
16
× 20S
490
1400
150
16
18
16
18
18
×
×
×
×
×
590
590
840
840
1010
1680
1680
2100
2100
2520
220
18
× 40
1175
2940
82
100
25
20S
31.5
25S
31.5
Case size
(0D×L)
120 Hz
Case size
(0D×L)
× 20
170
480
12.5
12.5
16
16
18
16
18
×
×
×
×
×
×
×
20
25
20S
25
20S
31.5
25S
230
275
315
375
375
535
465
660
790
900
1070
1070
1530
1330
18
× 25S
535
1530
18
× 31.5
640
1600
10
10
15
22
× 20
450 V
Ripple current
(mA r.m.s.) 105 °C
120 Hz
100 kHz
10
400 V
Cap.
(μF)
Ripple current
(mA r.m.s.) 105 °C
Case size
(0D×L)
100 kHz
150
430
12.5 × 20
12.5 × 25
16
× 20S
205
265
300
590
760
860
33
16
× 20S
355
1020
47
16
18
× 25
× 20S
410
410
1180
1180
68
18
× 25
515
1470
82
18
× 31.5
575
1645
100
18
× 40
825
2060
56
10
× 20U
12.5 × 20
12.5 × 25
Ripple current
(mA r.m.s.) 105 °C
120 Hz
115
170
270
100 kHz
330
490
780
16
× 20S
330
945
16
18
16
18
18
×
×
×
×
×
350
350
420
420
480
1000
1000
1200
1200
1380
18
× 40
630
1800
25
20S
31.5
25S
31.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 May. 2014
– EEE-91 –
Aluminum Electrolytic Capacitors/ EE
■ Standard Products
Endurance : 105 °C 010=8000 h, 012.5 to 018=10000 h
Case size
W.V.
Cap.
(±20 %)
Dia.
(V)
(μF)
(mm)
22
33
47
68
82
10
10
10
12.5
12.5
12.5
16
16
18
16
18
18
10
10
12.5
12.5
16
16
16
18
16
18
18
10
12.5
12.5
16
16
16
18
16
18
18
18
10
12.5
12.5
16
16
18
16
18
18
18
160
100
150
220
330
22
33
47
68
200
82
100
150
220
330
22
33
47
68
250
82
100
150
220
15
22
33
350
47
68
82
100
Speciﬁcation
Ripple tan d EndurCurrent
ance
Length
(100 kHz) (120 Hz)
(+105 °C) (+20 °C)
(hours)
(mm) (mA r.m.s.)
20
20
20
20
25
25
20
25
20
31.5
25
31.5
20
20
20
25
20
20
25
20
25
31.5
40
20
20
25
20
20
25
20
31.5
25
31.5
40
20
20
25
20
25
20
31.5
25
25
31.5
700
810
1065
1350
1480
1660
1700
1890
1820
2280
1950
2600
850
920
1100
1330
1330
1460
1730
1665
1860
2600
3120
785
995
1290
1400
1400
1680
1680
2100
2100
2520
2940
480
660
790
900
1070
1070
1530
1330
1530
1600
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
8000
8000
8000
10000
10000
10000
10000
10000
10000
10000
10000
10000
8000
8000
10000
10000
10000
10000
10000
10000
10000
10000
10000
8000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
8000
10000
10000
10000
10000
10000
10000
10000
10000
10000
Lead Length
Lead
Lead Space
Dia.
Taping
Straight
✽B
(mm)
(mm)
(mm)
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
Min. Packaging Q'ty
Part No.
EEUEE2C220( )
EEUEE2C330( )
EEUEE2C470( )
EEUEE2C680( )
EEUEE2C820( )
EEUEE2C101( )
EEUEE2C101S( )
EEUEE2C151( )
EEUEE2C151S( )
EEUEE2C221
EEUEE2C221S( )
EEUEE2C331
EEUEE2D220( )
EEUEE2D330( )
EEUEE2D470( )
EEUEE2D680( )
EEUEE2D680S( )
EEUEE2D820S( )
EEUEE2D101( )
EEUEE2D101S( )
EEUEE2D151( )
EEUEE2D221
EEUEE2D331
EEUEE2E220( )
EEUEE2E330( )
EEUEE2E470( )
EEUEE2E470S( )
EEUEE2E680S( )
EEUEE2E820( )
EEUEE2E820S( )
EEUEE2E101
EEUEE2E101S( )
EEUEE2E151
EEUEE2E221
EEUEE2V150( )
EEUEE2V220( )
EEUEE2V330( )
EEUEE2V330S( )
EEUEE2V470( )
EEUEE2V470S( )
EEUEE2V680
EEUEE2V680S( )
EEUEE2V820S( )
EEUEE2V101
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
200
200
100
100
100
100
100
50
200
200
200
200
100
100
100
100
100
50
50
200
200
200
100
100
100
100
100
100
50
50
200
200
200
100
100
100
100
100
100
50
500
500
500
500
500
500
250
250
250
250
500
500
500
500
250
250
250
250
250
500
500
500
250
250
250
250
250
500
500
500
250
250
250
250
250
· When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 May. 2014
– EEE-92 –
Aluminum Electrolytic Capacitors/ EE
■ Standard Products
Endurance : 105 °C 010=8000 h, 012.5 to 018=10000 h
Case size
W.V.
Cap.
(±20 %)
Dia.
(V)
(μF)
(mm)
10
15
10
12.5
12.5
16
16
16
18
18
18
18
10
12.5
12.5
16
16
18
16
18
18
18
22
400
33
47
68
82
100
10
15
22
450
33
47
56
68
Speciﬁcation
Ripple tan d EndurCurrent
ance
Length
(100 kHz) (120 Hz)
(+105 °C) (+20 °C)
(hours)
(mm) (mA r.m.s.)
20
20
25
20
20
25
20
25
31.5
40
20
20
25
20
25
20
31.5
25
31.5
40
430
590
760
860
1020
1180
1180
1470
1645
2060
330
490
780
945
1000
1000
1200
1200
1380
1800
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
8000
10000
10000
10000
10000
10000
10000
10000
10000
10000
8000
10000
10000
10000
10000
10000
10000
10000
10000
10000
Lead Length
Lead
Lead Space
Dia.
Taping
Straight
✽B
(mm)
(mm)
(mm)
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
7.5
7.5
7.5
7.5
Min. Packaging Q'ty
Part No.
EEUEE2G100( )
EEUEE2G150( )
EEUEE2G220( )
EEUEE2G220S( )
EEUEE2G330S( )
EEUEE2G470( )
EEUEE2G470S( )
EEUEE2G680( )
EEUEE2G820
EEUEE2G101
EEUEE2W100U( )
EEUEE2W100( )
EEUEE2W150( )
EEUEE2W220S( )
EEUEE2W330( )
EEUEE2W330S( )
EEUEE2W470
EEUEE2W470S( )
EEUEE2W560
EEUEE2W680
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
100
100
100
100
100
50
50
200
200
200
100
100
100
100
100
50
50
500
500
500
250
250
250
250
250
500
500
500
250
250
250
250
· When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 May. 2014
– EEE-93 –
Aluminum Electrolytic Capacitors/ TA
Radial Lead Type
Series:
TA
Type:
A
■ Features
●
●
●
●
Endurance: 125 °C 2000 h
Heat cycle: 1000 cycle –40 °C to +125 °C
AEC-Q200 qualiﬁed ✽
RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
–40 °C to + 125 °C
10 V .DC to 63 V .DC
2.2 μF to 4700 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
W.V.(V)
10
16
25
35
50
63
(120Hz / +20 °C)
tan d
0.20 0.16 0.14 0.12 0.10 0.09
For capacitance value > 1000 μF , add 0.02 per every 1000 μF.
tan d
After following life test with DC voltage and +125 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), for 2000 hours,
when the capacitors are restored to 20 °C, the capacitors, shall meet the limits speciﬁed below.
Endurance
Capacitance change ±30% of initial measured value
tan d
< 300 % of initial speciﬁed value
DC leakage current < initial speciﬁed value
Shelf Life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits speciﬁed in Endurance. (With voltage treatment)
■ Frequency correction factor for ripple current
W.V.
(V.DC)
Frequency (Hz)
Cap. (μF)
60
120
1k
10 k
100 k
1
to
330
0.55
0.65
0.85
0.90
1.00
470
to
1000
0.70
0.75
0.90
0.95
1.00
2200
to
4700
0.75
0.80
0.90
0.95
1.00
10 to 63
■ Dimensions in mm (not to scale)
Sleeve
fd±0.05
(Unit : mm)
08
010
+
Pressure relief
L=
14 min.
3 min.
0D±0.5
F±0.5
–
0D±0.5
=L16 : L±1.0 (016L15, 018L15 : L±1.5)
L20 : L±2.0
Body Dia. 0D
8
10
12.5
16
18
Lead Dia. 0d
0.6
Lead space F
3.5
0.6
0.6
0.8
0.8
5.0
5.0
7.5
7.5
✽ This product qualify for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-94 –
Aluminum Electrolytic Capacitors/ TA
■ Standard Products
Endurance : 125 °C 2000 h
Case size
W.V.
(V)
Cap.
(±20 %)
(μF)
(mm)
330
470
8
10
10
12.5
12.5
16
18
16
18
16
18
8
10
10
12.5
16
16
18
16
18
18
8
10
10
10
12.5
12.5
16
18
16
18
18
10
10
10
12.5
16
16
18
18
1000
10
2200
3300
4700
220
330
470
1000
16
2200
3300
4700
100
220
330
470
25
1000
2200
3300
100
220
330
35
Dia.
470
1000
2200
Speciﬁcation
Ripple ImpedCurrent
ance
Length
(100 kHz) (100 kHz)
(+125 °C) (+20 °C)
(mm) (mA r.m.s.)
(Ω)
11.5
12.5
20
15
25
20
15
25
20
31.5
25
11.5
12.5
16
20
15
25
20
31.5
25
31.5
11.5
12.5
16
20
15
25
20
15
31.5
25
35.5
12.5
16
20
20
15
25
20
35.5
500
680
1100
1085
1750
1985
1800
2300
2250
2710
2470
500
680
945
1490
1520
2300
2250
2710
2470
3270
500
680
945
1100
1085
1750
1985
1800
2710
2470
3310
555
765
930
1330
1450
2010
2180
2790
0.130
0.100
0.057
0.070
0.033
0.032
0.042
0.024
0.031
0.020
0.022
0.130
0.100
0.075
0.042
0.047
0.024
0.031
0.020
0.022
0.018
0.130
0.100
0.075
0.057
0.070
0.033
0.032
0.042
0.020
0.022
0.017
0.180
0.130
0.100
0.070
0.088
0.037
0.046
0.025
Lead Length
Lead
Dia.
Min. Packaging Q'ty
Lead Space
Straight
Taping
✽B
(mm)
(mm)
(mm)
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
3.5
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
3.5
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
3.5
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
5.0
5.0
5.0
5.0
7.5
7.5
7.5
Part No.
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
200
100
100
100
100
100
100
200
200
200
200
100
100
100
100
100
50
200
200
200
200
200
200
100
100
100
100
50
200
200
200
200
100
100
100
50
1000
500
500
500
500
250
250
250
250
EEUTA1A331( )
EEUTA1A471( )
EEUTA1A102( )
EEUTA1A102S( )
EEUTA1A222L( )
EEUTA1A222( )
EEUTA1A222S( )
EEUTA1A332( )
EEUTA1A332S( )
EEUTA1A472
EEUTA1A472S( )
EEUTA1C221( )
EEUTA1C331( )
EEUTA1C471( )
EEUTA1C102( )
EEUTA1C102S( )
EEUTA1C222( )
EEUTA1C222S( )
EEUTA1C332
EEUTA1C332S( )
EEUTA1C472
EEUTA1E101( )
EEUTA1E221( )
EEUTA1E331( )
EEUTA1E471( )
EEUTA1E471S( )
EEUTA1E102L( )
EEUTA1E102( )
EEUTA1E102S( )
EEUTA1E222
EEUTA1E222S( )
EEUTA1E332
EEUTA1V101( )
EEUTA1V221( )
EEUTA1V331( )
EEUTA1V471( )
EEUTA1V471S( )
EEUTA1V102( )
EEUTA1V102S( )
EEUTA1V222
250
1000
500
500
500
250
250
250
250
1000
500
500
500
500
500
250
250
250
500
500
500
500
250
250
250
· When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-95 –
Aluminum Electrolytic Capacitors/ TA
■ Standard Products
Endurance : 125 °C 2000 h
Case size
W.V.
(V)
50
Cap.
(±20 %)
(μF)
(mm)
10
22
33
47
100
220
8
8
8
8
10
10
12.5
16
12.5
16
18
16
18
8
10
10
10
12.5
16
18
16
18
16
18
330
470
1000
22
33
47
100
63
Dia.
220
330
470
Speciﬁcation
Ripple ImpedCurrent
ance
Length
(100 kHz) (100 kHz)
(+125 °C) (+20 °C)
(mm) (mA r.m.s.)
(Ω)
11.5
11.5
11.5
11.5
12.5
20
20
15
25
20
15
31.5
25
11.5
12.5
16
20
25
20
15
25
20
31.5
25
180
250
300
440
555
930
1330
1450
1650
1650
1710
2430
2350
310
410
460
680
1325
1360
1300
1660
1760
2055
1990
0.950
0.650
0.450
0.350
0.180
0.100
0.070
0.088
0.055
0.053
0.075
0.031
0.032
0.470
0.360
0.270
0.205
0.100
0.085
0.120
0.070
0.077
0.060
0.060
Lead Length
Lead
Dia.
Min. Packaging Q'ty
Lead Space
Straight
Taping
✽B
(mm)
(mm)
(mm)
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.6
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
3.5
3.5
3.5
3.5
5.0
5.0
5.0
7.5
5.0
7.5
7.5
7.5
7.5
3.5
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
Part No.
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
200
200
200
100
200
100
100
100
100
200
200
200
200
200
100
100
100
100
100
100
1000
1000
1000
1000
500
500
500
250
500
250
250
EEUTA1H100( )
EEUTA1H220( )
EEUTA1H330( )
EEUTA1H470S( )
EEUTA1H101( )
EEUTA1H221( )
EEUTA1H331( )
EEUTA1H331S( )
EEUTA1H471L( )
EEUTA1H471( )
EEUTA1H471S( )
EEUTA1H102
EEUTA1H102S( )
EEUTA1J220( )
EEUTA1J330( )
EEUTA1J470( )
EEUTA1J101( )
EEUTA1J221L( )
EEUTA1J221( )
EEUTA1J221S( )
EEUTA1J331( )
EEUTA1J331S( )
EEUTA1J471
EEUTA1J471S( )
250
1000
500
500
500
500
250
250
250
250
250
· When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-96 –
Aluminum Electrolytic Capacitors/ TP
Radial Lead Type
Series:
TP
Type:
A
■ Features
●
●
●
●
●
Endurance: 125 °C 2000 h to 5000 h or 135 °C 1000 h to 2000 h
Smaller than series TA
High ripple current (at high frequency) : 20 to 40% higher than TA series
AEC-Q200 qualiﬁed ✽
RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
–40 °C to + 135 °C
25 V .DC to 35 V .DC
100 μF to 5100 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV After 2 minutes
W.V.(V)
25
35
(120Hz / +20 °C)
tan d
0.14 0.12
For capacitance value > 1000 μF , add 0.02 per every 1000 μF.
After following life test with DC voltage and +125 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits speciﬁed below.
Duration
08 : 2000 hours, 010 : 3000 hours, 012.5 : 4000 hours, 016 to 018 : 5000 hours
Capacitance change ±30% of initial measured value
tan d
< 300 % of initial speciﬁed value
DC leakage current < initial speciﬁed value
After following life test with DC voltage and +135 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits speciﬁed below.
Duration
08 : 1000 hours, 010 to 018 : 2000 hours
Capacitance change ±30% of initial measured value
tan d
< 300 % of initial speciﬁed value
DC leakage current < initial speciﬁed value
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits speciﬁed in Endurance. (With voltage treatment)
After storage for 1000 hours at +135 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits speciﬁed in Endurance. (With voltage treatment)
tan d
Endurance 1
Endurance 2
Shelf Life 1
Shelf Life 2
■ Frequency correction factor for ripple current
W.V.
(V.DC)
Cap. (μF)
25 to 35
to
to
to
390
1200
60
0.55
0.70
0.75
330
1000
120
0.65
0.75
0.80
Frequency (Hz)
1k
0.85
0.90
0.90
10 k
0.90
0.95
0.95
■ Dimensions in mm (not to scale)
(Unit : mm)
fd±0.05
Sleeve
100 k
1.00
1.00
1.00
08
010
+
Pressure relief
L=
=L16 : L±1.5
L20 : L±2.0
Body Dia. 0D
Lead Dia. 0d
Lead space F
8
0.6
3.5
14 min.
3 min.
10
0.6
5.0
0D±0.5
12.5
0.6
5.0
F±0.5
–
0D±0.5
16
0.8
7.5
18
0.8
7.5
✽ This product qualify for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-97 –
Aluminum Electrolytic Capacitors/ TP
■ Standard Products
Case size
W.V.
(V)
25
35
Cap.
(±20 %) Dia. Length
(μF) (mm) (mm)
220 10
12.5
330 10
16
8
20
470
10
16
510 10
16
820 10
20
1000 12.5 20
1200 12.5 20
12.5 25
1800
16
20
2000 16
20
16
25
2200
18
20
16
25
2700
18
20
16
31.5
3300
18
25
16
31.5
3900
18
25
4700 18
31.5
5100 18
31.5
100 10
12.5
120 10
12.5
8
20
220
10
16
8
20
270
10
16
330 10
20
390 10
20
470 12.5 20
560 12.5 20
620 12.5 20
820 12.5 25
1000 16
20
1200 16
20
16
25
1500
18
20
1600 16
25
16
31.5
1800
18
25
16
31.5
2000
18
25
2200 18
31.5
2700 18
31.5
Speciﬁcation
Ripple Ripple
Current Current
(100 kHz) (100 kHz)
(+125 °C) (+135 °C)
(mA r.m.s.) (mA r.m.s.)
580
500
1100
945
1060
760
1100
945
1100
945
1540 1100
1860 1490
1860 1490
2180 1750
2380 1985
2380 1985
2760 2300
2700 2250
2760 2300
2700 2250
3250 2710
2960 2470
3250 2710
2960 2470
3480 2900
3480 2900
580
500
580
500
1060
760
1100
945
1060
760
1100
945
1540 1100
1540 1100
1860 1490
1860 1490
1860 1490
2180 1750
2380 1985
2380 1985
2760 2300
2700 2250
2760 2300
3250 2710
2960 2470
3250 2710
2960 2470
3480 2900
3480 2900
Lead Length
Lead Space
E.S.R tan d
Lead
125 °C 135 °C
Dia.
(100 kHz) (120 Hz)
Taping
Enduance Enduance
Straight
(+20 °C) (+20 °C)
✽B
(Ω)
0.190
0.130
0.067
0.130
0.130
0.052
0.038
0.038
0.030
0.029
0.029
0.022
0.028
0.022
0.028
0.018
0.020
0.018
0.020
0.016
0.016
0.190
0.190
0.067
0.130
0.067
0.130
0.052
0.052
0.038
0.038
0.038
0.030
0.029
0.029
0.022
0.028
0.022
0.018
0.020
0.018
0.020
0.016
0.016
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.16
0.16
0.16
0.16
0.16
0.18
0.18
0.18
0.18
0.20
0.22
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.14
0.14
0.14
0.14
(hours)
3000
3000
2000
3000
3000
3000
4000
4000
4000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
3000
3000
2000
3000
2000
3000
3000
3000
4000
4000
4000
4000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
Min. Packaging Q'ty
Part No.
✽ : Substandard
(E24series numbers)
(hours) (mm) (mm) (mm)
2000 0.6 5.0 5.0 EEUTP1E221( )
2000 0.6 5.0 5.0 EEUTP1E331( )
1000 0.6 3.5 5.0 EEUTP1E471L( )
2000 0.6 5.0 5.0 EEUTP1E471( )
2000 0.6 5.0 5.0 EEUTP1E511( )✽
2000 0.6 5.0 5.0 EEUTP1E821( )
2000 0.6 5.0 5.0 EEUTP1E102( )
2000 0.6 5.0 5.0 EEUTP1E122( )
2000 0.6 5.0 5.0 EEUTP1E182( )
2000 0.8 7.5
7.5 EEUTP1E182S( )
2000 0.8 7.5
7.5 EEUTP1E202S( )✽
2000 0.8 7.5
7.5 EEUTP1E222( )
2000 0.8 7.5
7.5 EEUTP1E222S( )
2000 0.8 7.5
7.5 EEUTP1E272( )
2000 0.8 7.5
7.5 EEUTP1E272S( )
2000 0.8 7.5
EEUTP1E332
2000 0.8 7.5
7.5 EEUTP1E332S( )
2000 0.8 7.5
EEUTP1E392
2000 0.8 7.5
7.5 EEUTP1E392S( )
2000 0.8 7.5
EEUTP1E472
2000 0.8 7.5
EEUTP1E512✽
2000 0.6 5.0 5.0 EEUTP1V101( )
2000 0.6 5.0 5.0 EEUTP1V121( )
1000 0.6 3.5 5.0 EEUTP1V221L( )
2000 0.6 5.0 5.0 EEUTP1V221( )
1000 0.6 3.5 5.0 EEUTP1V271L( )
2000 0.6 5.0 5.0 EEUTP1V271( )
2000 0.6 5.0 5.0 EEUTP1V331( )
2000 0.6 5.0 5.0 EEUTP1V391( )
2000 0.6 5.0 5.0 EEUTP1V471( )
2000 0.6 5.0 5.0 EEUTP1V561( )
2000 0.6 5.0 5.0 EEUTP1V621( )✽
2000 0.6 5.0 5.0 EEUTP1V821( )
2000 0.8 7.5
7.5 EEUTP1V102( )
2000 0.8 7.5
7.5 EEUTP1V122( )
2000 0.8 7.5
7.5 EEUTP1V152( )
2000 0.8 7.5
7.5 EEUTP1V152S( )
2000 0.8 7.5
7.5 EEUTP1V162( )✽
2000 0.8 7.5
EEUTP1V182
2000 0.8 7.5
7.5 EEUTP1V182S( )
2000 0.8 7.5
EEUTP1V202✽
2000 0.8 7.5
7.5 EEUTP1V202S( )✽
2000 0.8 7.5
EEUTP1V222
2000 0.8 7.5
EEUTP1V272
Straight
Taping
Leads
(pcs)
200
200
200
200
200
200
200
200
200
100
100
100
100
100
100
100
100
100
100
50
50
200
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
100
100
100
100
100
50
50
(pcs)
500
500
1000
500
500
500
500
500
500
250
250
250
250
250
250
250
250
500
500
1000
500
1000
500
500
500
500
500
500
500
250
250
250
250
250
250
250
· When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-98 –
Aluminum Electrolytic Capacitors/ NHG
Radial Lead Type
Series:
NHG
Type:
A
■ Features
● Endurance : 105 °C 1000 h to 2000 h
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
–55 °C to +105 °C
6.3 V.DC to 100 V.DC
2.2 μF to 22000 μF
–25 °C to +105 °C
160 V.DC to 450 V.DC
1 μF to 330 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA) After 2 minutes
(Which is greater)
DC Leakage Current
tan d
I < 0.06 CV +10 (μA) After 2 minutes
Please see the attached standard products list
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors
are restored to 20 °C, the capacitors shall meet the limits speciﬁed below.
Duration : 6.3 V.DC to 100 V.DC : (05 to 08)=1000 hours, (010 to 018)=2000 hours
160 V.DC to 450 V.DC : 2000 hours
Endurance
Capacitance change ±20 % of initial measured value
tan d
< 200 % of initial speciﬁed value
DC leakage current
< initial speciﬁed value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits speciﬁed in Endurance. (With voltage treatment)
Shelf Life
■ Frequency correction factor for ripple current
W.V.(V.DC)
Frequency (Hz)
Cap. (μF)
60
120
1k
10 k
100 k
33
0.75
1.00
1.55
1.80
2.00
470
0.80
1.00
1.35
1.50
1.50
to 22000
0.85
1.00
1.10
1.15
1.15
to
0.80
1.00
1.35
1.50
1.50
2.2 to
6.3 to 100
47
1000
160 to 450
1
to
330
■ Dimensions in mm (not to scale)
fd±0.05
(Unit : mm)
Sleeve
Pressure relief
06.3
08
010
+
L=
14 min.
0D±0.5
3 min.
F±0.5
–
0D±0.5
=L16 : L±1.0
L20 : L±2.0
Body Dia. 0D
5
6.3
8
10
12.5
16
18
Lead Dia. 0d
0.5
0.5
0.6
0.6
0.6
0.8
0.8
Lead space F
2.0
2.5
3.5
5.0
5.0
7.5
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-99 –
Aluminum Electrolytic Capacitors/ NHG
■ Standard Products
Case size
W.V.
(V)
6.3
10
16
25
35
Cap.
(±20 %)
Dia.
(μF) (mm)
220 5
470 6.3
1000 8
2200 10
3300 10
4700 12.5
6800 12.5
10000 16
15000 16
22000 18
330 6.3
470 8
1000 10
2200 10
3300 12.5
4700 12.5
6800 16
10000 16
15000 18
100 5
220 6.3
330 8
470 8
1000 10
2200 12.5
3300 12.5
4700 16
6800 16
10000 18
47 5
100 6.3
220 8
330 8
470 10
1000 10
2200 12.5
3300 16
4700 16
6800 18
47 5
100 6.3
220 8
330 10
470 10
1000 12.5
2200 16
3300 16
4700 18
Speciﬁcation
Lead Length
Ripple tan d Endur- Lead
Lead Space
Current
ance Dia.
Length
Taping Taping
(120 Hz) (120 Hz)
Straight
✽B
✽i
(+105 °C) (+20 °C)
(hours) (mm) (mm) (mm) (mm)
(mm) (mA r.m.s.)
11
140
0.28 1000
0.5
2.0
5.0
2.5
11.2
230
0.28 1000
0.5
2.5
5.0
2.5
11.5
380
0.28 1000
0.6
3.5
5.0
16
710
0.30 2000
0.6
5.0
5.0
20
840
0.32 2000
0.6
5.0
5.0
20
1090
0.34 2000
0.6
5.0
5.0
25
1350
0.38 2000
0.6
5.0
5.0
25
1650
0.46 2000
0.8
7.5
7.5
31.5 2010
0.56 2000
0.8
7.5
35.5 2350
0.70 2000
0.8
7.5
11.2
200
0.24 1000
0.5
2.5
5.0
2.5
11.5
250
0.24 1000
0.6
3.5
5.0
12.5
460
0.24 2000
0.6
5.0
5.0
20
760
0.26 2000
0.6
5.0
5.0
20
1000
0.28 2000
0.6
5.0
5.0
25
1260
0.30 2000
0.6
5.0
5.0
25
1570
0.34 2000
0.8
7.5
7.5
31.5 1890
0.42 2000
0.8
7.5
35.5 2180
0.52 2000
0.8
7.5
11
110
0.20 1000
0.5
2.0
5.0
2.5
11.2
180
0.20 1000
0.5
2.5
5.0
2.5
11.5
260
0.20 1000
0.6
3.5
5.0
11.5
310
0.20 1000
0.6
3.5
5.0
16
560
0.20 2000
0.6
5.0
5.0
20
920
0.22 2000
0.6
5.0
5.0
25
1170
0.24 2000
0.6
5.0
5.0
25
1480
0.26 2000
0.8
7.5
7.5
31.5 1780
0.30 2000
0.8
7.5
35.5 2060
0.38 2000
0.8
7.5
11
91
0.16 1000
0.5
2.0
5.0
2.5
11.2
130
0.16 1000
0.5
2.5
5.0
2.5
11.5
230
0.16 1000
0.6
3.5
5.0
11.5
310
0.16 1000
0.6
3.5
5.0
12.5
380
0.16 2000
0.6
5.0
5.0
20
680
0.16 2000
0.6
5.0
5.0
25
1090
0.18 2000
0.6
5.0
5.0
25
1400
0.20 2000
0.8
7.5
7.5
31.5 1750
0.22 2000
0.8
7.5
35.5 2040
0.26 2000
0.8
7.5
11
90
0.14 1000
0.5
2.0
5.0
2.5
11.2
150
0.14 1000
0.5
2.5
5.0
2.5
11.5
270
0.14 1000
0.6
3.5
5.0
12.5
350
0.14 2000
0.6
5.0
5.0
16
460
0.14 2000
0.6
5.0
5.0
20
810
0.14 2000
0.6
5.0
5.0
25
1260
0.16 2000
0.8
7.5
7.5
31.5 1610
0.18 2000
0.8
7.5
35.5 1910
0.20 2000
0.8
7.5
Min. Packaging Q'ty
Part No.
ECA0JHG221( )
ECA0JHG471( )
ECA0JHG102( )
ECA0JHG222( )
ECA0JHG332( )
ECA0JHG472( )
ECA0JHG682( )
ECA0JHG103( )
ECA0JHG153
ECA0JHG223
ECA1AHG331( )
ECA1AHG471( )
ECA1AHG102( )
ECA1AHG222( )
ECA1AHG332( )
ECA1AHG472( )
ECA1AHG682( )
ECA1AHG103
ECA1AHG153
ECA1CHG101( )
ECA1CHG221( )
ECA1CHG331( )
ECA1CHG471( )
ECA1CHG102( )
ECA1CHG222( )
ECA1CHG332( )
ECA1CHG472( )
ECA1CHG682
ECA1CHG103
ECA1EHG470( )
ECA1EHG101( )
ECA1EHG221( )
ECA1EHG331( )
ECA1EHG471( )
ECA1EHG102( )
ECA1EHG222( )
ECA1EHG332( )
ECA1EHG472
ECA1EHG682
ECA1VHG470( )
ECA1VHG101( )
ECA1VHG221( )
ECA1VHG331( )
ECA1VHG471( )
ECA1VHG102( )
ECA1VHG222( )
ECA1VHG332
ECA1VHG472
Straight
Taping
Leads
(pcs)
200
200
200
200
200
200
200
100
100
50
200
200
200
200
200
200
100
100
50
200
200
200
200
200
200
200
100
100
50
200
200
200
200
200
200
200
100
100
50
200
200
200
200
200
200
100
100
50
(pcs)
2000
2000
1000
500
500
500
500
250
2000
1000
500
500
500
500
250
2000
2000
1000
1000
500
500
500
250
2000
2000
1000
1000
500
500
500
250
2000
2000
1000
500
500
500
250
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-100 –
Aluminum Electrolytic Capacitors/ NHG
■ Standard Products
Case size
Speciﬁcation
Lead Length
Ripple tan d Endur- Lead
Lead Space
Cap.
W.V.
ance Dia.
(±20 %) Dia. Length Current
Taping Taping
(120 Hz) (120 Hz)
Straight
✽B
✽i
(+105 °C) (+20 °C)
(hours) (mm) (mm) (mm) (mm)
(V)
(μF) (mm) (mm) (mA r.m.s.)
50
63
100
2.2
5
11
18
0.12
1000
0.5
2.0
5.0
3.3
5
11
22
0.12
1000
0.5
2.0
4.7
5
11
26
0.12
1000
0.5
2.0
Min. Packaging Q'ty
Part No.
Straight
Taping
Leads
(pcs)
(pcs)
2.5
ECA1HHG2R2( )
200
2000
5.0
2.5
ECA1HHG3R3( )
200
2000
5.0
2.5
ECA1HHG4R7( )
200
2000
10
5
11
39
0.12
1000
0.5
2.0
5.0
2.5
ECA1HHG100( )
200
2000
22
5
11
65
0.12
1000
0.5
2.0
5.0
2.5
ECA1HHG220( )
200
2000
33
5
11
47
6.3
11.2
90
0.12
1000
0.5
2.0
5.0
2.5
ECA1HHG330( )
200
2000
110
0.12
1000
0.5
2.5
5.0
2.5
ECA1HHG470( )
200
2000
100
8
11.5
180
0.12
1000
0.6
3.5
5.0
ECA1HHG101( )
200
1000
220
10
12.5
300
0.12
2000
0.6
5.0
5.0
ECA1HHG221( )
200
500
330
10
16
410
0.12
2000
0.6
5.0
5.0
ECA1HHG331( )
200
500
470
10
20
530
0.12
2000
0.6
5.0
5.0
ECA1HHG471( )
200
500
1000
12.5
25
950
0.12
2000
0.6
5.0
5.0
ECA1HHG102( )
200
500
2200
16
31.5
1470
0.14
2000
0.8
7.5
ECA1HHG222
100
3300
18
35.5
1770
0.16
2000
0.8
7.5
ECA1HHG332
50
10
5
11
46
0.10
1000
0.5
2.0
5.0
2.5
ECA1JHG100( )
200
2000
22
5
11
71
0.10
1000
0.5
2.0
5.0
2.5
ECA1JHG220( )
200
2000
33
6.3
11.2
100
0.10
1000
0.5
2.5
5.0
2.5
ECA1JHG330( )
200
2000
47
6.3
11.2
120
0.10
1000
0.5
2.5
5.0
2.5
ECA1JHG470( )
200
2000
100
10
12.5
215
0.10
2000
0.6
5.0
5.0
ECA1JHG101( )
200
500
220
10
16
335
0.10
2000
0.6
5.0
5.0
ECA1JHG221( )
200
500
330
10
20
510
0.10
2000
0.6
5.0
5.0
ECA1JHG331( )
200
500
470
12.5
20
640
0.10
2000
0.6
5.0
5.0
ECA1JHG471( )
200
500
7.5
ECA1JHG102( )
100
250
1000
16
25
2200
18
35.5
930
0.10
2000
0.8
7.5
1610
0.12
2000
0.8
7.5
2.2
5
11
21
0.08
1000
0.5
2.0
5.0
3.3
5
4.7
5
11
31
0.08
1000
0.5
2.0
11
38
0.08
1000
0.5
2.0
ECA1JHG222
50
2.5
ECA2AHG2R2( )
200
2000
5.0
2.5
ECA2AHG3R3( )
200
2000
5.0
2.5
ECA2AHG4R7( )
200
2000
10
6.3
11.2
54
0.08
1000
0.5
2.5
5.0
2.5
ECA2AHG100( )
200
2000
22
6.3
11.2
93
0.08
1000
0.5
2.5
5.0
2.5
ECA2AHG220( )
200
2000
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-101 –
Aluminum Electrolytic Capacitors/ NHG
■ Standard Products
Case size
Speciﬁcation
Lead Length
Ripple tan d Endur- Lead
Lead Space
Cap.
W.V.
ance Dia.
(±20 %) Dia. Length Current
Taping Taping
(120 Hz) (120 Hz)
Straight
✽B
✽i
(+105 °C) (+20 °C)
(hours) (mm) (mm) (mm) (mm)
(V)
(μF) (mm) (mm) (mA r.m.s.)
100
160
200
250
350
33
47
100
220
330
470
1000
1
2.2
3.3
4.7
10
22
33
47
100
220
330
1
2.2
3.3
4.7
10
22
33
47
100
220
1
2.2
3.3
4.7
10
22
33
47
100
1
2.2
3.3
4.7
10
22
33
47
100
8
10
10
12.5
16
16
18
6.3
6.3
6.3
6.3
10
10
10
12.5
16
16
18
6.3
6.3
6.3
8
10
10
12.5
12.5
16
18
6.3
6.3
8
8
10
12.5
12.5
12.5
16
6.3
8
10
10
10
12.5
16
16
18
11.5
12.5
20
25
25
25
35.5
11.2
11.2
11.2
11.2
12.5
20
20
20
25
31.5
31.5
11.2
11.2
11.2
11.5
16
20
20
20
25
31.5
11.2
11.2
11.5
11.5
16
20
20
25
31.5
11.2
11.5
12.5
16
20
20
25
25
31.5
130
165
265
440
540
715
985
17
25
36
43
70
130
180
220
335
540
705
17
25
36
50
80
140
190
220
335
575
17
29
42
50
88
155
190
230
365
18
31
38
50
82
130
195
230
375
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
1000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.5
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
3.5
5.0
5.0
5.0
7.5
7.5
7.5
2.5
2.5
2.5
2.5
5.0
5.0
5.0
5.0
7.5
7.5
7.5
2.5
2.5
2.5
3.5
5.0
5.0
5.0
5.0
7.5
7.5
2.5
2.5
3.5
3.5
5.0
5.0
5.0
5.0
7.5
2.5
3.5
5.0
5.0
5.0
5.0
7.5
7.5
7.5
5.0
5.0
5.0
5.0
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
2.5
2.5
2.5
2.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
2.5
2.5
2.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
2.5
2.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
2.5
Min. Packaging Q'ty
Part No.
ECA2AHG330( )
ECA2AHG470( )
ECA2AHG101( )
ECA2AHG221( )
ECA2AHG331( )
ECA2AHG471( )
ECA2AHG102
ECA2CHG010( )
ECA2CHG2R2( )
ECA2CHG3R3( )
ECA2CHG4R7( )
ECA2CHG100( )
ECA2CHG220( )
ECA2CHG330( )
ECA2CHG470( )
ECA2CHG101( )
ECA2CHG221
ECA2CHG331
ECA2DHG010( )
ECA2DHG2R2( )
ECA2DHG3R3( )
ECA2DHG4R7( )
ECA2DHG100( )
ECA2DHG220( )
ECA2DHG330( )
ECA2DHG470( )
ECA2DHG101( )
ECA2DHG221
ECA2EHG010( )
ECA2EHG2R2( )
ECA2EHG3R3
ECA2EHG4R7( )
ECA2EHG100( )
ECA2EHG220( )
ECA2EHG330( )
ECA2EHG470( )
ECA2EHG101
ECA2VHG010( )
ECA2VHG2R2( )
ECA2VHG3R3( )
ECA2VHG4R7( )
ECA2VHG100( )
ECA2VHG220( )
ECA2VHG330( )
ECA2VHG470( )
ECA2VHG101
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
100
100
50
200
200
200
200
200
200
200
200
100
100
50
200
200
200
200
200
200
200
200
100
50
200
200
200
200
200
200
200
200
100
200
200
200
200
200
200
100
100
50
1000
500
500
500
250
250
2000
2000
2000
2000
500
500
500
500
250
2000
2000
2000
1000
500
500
500
500
250
2000
2000
1000
1000
500
500
500
500
2000
1000
500
500
500
500
250
250
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-102 –
Aluminum Electrolytic Capacitors/ NHG
■ Standard Products
Case size
Speciﬁcation
Lead Length
Ripple tan d Endur- Lead
Lead Space
Cap.
W.V.
ance Dia.
(±20 %) Dia. Length Current
Taping Taping
(120 Hz) (120 Hz)
Straight
✽B
✽i
(+105 °C) (+20 °C)
(V)
(μF) (mm) (mm) (mA r.m.s.)
(hours) (mm) (mm) (mm) (mm)
1
400
450
6.3
11.2
18
0.24
2.2
8
11.5
30
0.24
3.3
10
12.5
40
0.24
2000
5.0
2.5
Min. Packaging Q'ty
Part No.
ECA2GHG010( )
Straight
Taping
Leads
(pcs)
(pcs)
200
2000
0.5
2.5
2000
0.6
3.5
5.0
ECA2GHG2R2( )
200
1000
2000
0.6
5.0
5.0
ECA2GHG3R3( )
200
500
4.7
10
16
50
0.24
2000
0.6
5.0
5.0
ECA2GHG4R7( )
200
500
10
10
20
80
0.24
2000
0.6
5.0
5.0
ECA2GHG100( )
200
500
22
12.5
25
145
0.24
2000
0.6
5.0
5.0
ECA2GHG220( )
200
500
33
16
25
195
0.24
2000
0.8
7.5
7.5
ECA2GHG330( )
100
250
47
16
31.5
250
0.24
2000
0.8
7.5
ECA2GHG470
100
1
8
11.5
18
0.24
2000
0.6
3.5
5.0
ECA2WHG010( )
200
1000
2.2
10
12.5
29
0.24
2000
0.6
5.0
5.0
ECA2WHG2R2( )
200
500
3.3
10
16
41
0.24
2000
0.6
5.0
5.0
ECA2WHG3R3( )
200
500
4.7
10
20
49
0.24
2000
0.6
5.0
5.0
ECA2WHG4R7( )
200
500
10
12.5
20
75
0.24
2000
0.6
5.0
5.0
ECA2WHG100( )
200
500
22
16
25
115
0.24
2000
0.8
7.5
7.5
ECA2WHG220( )
100
250
33
16
31.5
155
0.24
2000
0.8
7.5
ECA2WHG330
100
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-103 –
Aluminum Electrolytic Capacitors/ HD
Radial Lead Type
Series:
HD
Type:
A
■ Features
● Endurance : 105 °C 1000 h to 2000 h
● Minaturize, Higher Capacitance :
1 Size Miniturized Product of Current A-NHG
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
–55 °C to +105 °C
10 V.DC to 50 V.DC
2.2 μF to 22000 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA) After 2 minutes
(Which is greater)
DC Leakage Current
tan d
Please see the attached standard products list
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors
are restored to 20 °C, the capacitors shall meet the limits speciﬁed below.
Duration : 05 to 08=1000 hours, 010 to 018=2000 hours
Endurance
Capacitance change ±20 % of initial measured value
tan d
< 200 % of initial speciﬁed value
DC leakage current
< initial speciﬁed value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits speciﬁed in Endurance. (With voltage treatment)
Shelf Life
■ Frequency correction factor for ripple current
W.V.(V.DC)
Frequency (Hz)
Cap. (μF)
2.2
10 to 50
to
60
120
1k
10 k
100 k
33
0.75
1.00
1.55
1.80
2.00
47
to
470
0.80
1.00
1.35
1.50
1.50
1000
to
22000
0.85
1.00
1.10
1.15
1.15
■ Dimensions in mm (not to scale)
fd±0.05
(Unit : mm)
Sleeve
Pressure relief
06.3
08
010
+
L=
14 min.
0D±0.5
3 min.
F±0.5
–
0D±0.5
= L16 : L±1.5
L20 : L±2.0
Body Dia. 0D
Lead Dia. 0d
Lead space F
5
0.5
2.0
6.3
0.5
2.5
8
0.6
3.5
10
0.6
5.0
12.5
0.6
5.0
16
0.8
7.5
18
0.8
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04 Mar. 2015
– EEE-104 –
Aluminum Electrolytic Capacitors/ HD
■ Standard Products
Endurance : 105 °C 05 to 08=1000 h, 010 to 018=2000 h
Case size
Speciﬁcation
Lead Length
Ripple
tan
EndurLead
d
Lead Space
Cap.
W.V.
ance Dia.
(±20 %) Dia. Length Current
(120 Hz) (120 Hz)
Straight Taping Taping
✽B
✽H
(+105 °C) (+20 °C)
(V)
(μF) (mm) (mm) (mA r.m.s.)
(hours) (mm) (mm) (mm) (mm)
10
16
25
35
330 6.3
470 8
1000 10
2200 10
4700 12.5
6800 12.5
10000 16
15000 16
22000 18
100 5
220 6.3
330 8
470 8
3300 12.5
4700 12.5
6800 16
8200 16
10000 16
15000 18
47 5
68 5
100 6.3
220 8
330 8
470 10
1000 10
2200 12.5
3300 12.5
4700 16
5600 16
6800 16
10000 18
47 5
100 6.3
220 8
330 10
470 10
680 10
2200 12.5
3300 16
4700 16
6800 18
11.2
200
11.5
250
12.5
460
16
760
20
1260
25
1570
25
1890
31.5 2180
35.5 2400
11
110
11.2
180
11.5
260
11.5
310
20
1170
25
1480
25
1780
25
1780
31.5 2060
35.5 2210
11
91
11
91
11.2
130
11.5
230
11.5
310
12.5
380
16
680
20
1090
25
1400
25
1750
25
1750
31.5 2040
35.5 2200
11
90
11.2
150
11.5
270
12.5
350
16
460
16
460
25
1260
25
1610
31.5 1910
35.5 2050
0.24
0.24
0.24
0.26
0.30
0.34
0.42
0.52
0.66
0.20
0.20
0.20
0.20
0.24
0.26
0.30
0.34
0.38
0.48
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.18
0.20
0.22
0.24
0.26
0.34
0.14
0.14
0.14
0.14
0.14
0.14
0.16
0.18
0.20
0.24
1000
1000
2000
2000
2000
2000
2000
2000
2000
1000
1000
1000
1000
2000
2000
2000
2000
2000
2000
1000
1000
1000
1000
1000
2000
2000
2000
2000
2000
2000
2000
2000
1000
1000
1000
2000
2000
2000
2000
2000
2000
2000
0.5
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.5
0.5
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
2.5
3.5
5.0
5.0
5.0
5.0
7.5
7.5
7.5
2.0
2.5
3.5
3.5
5.0
5.0
7.5
7.5
7.5
7.5
2.0
2.0
2.5
3.5
3.5
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
2.0
2.5
3.5
5.0
5.0
5.0
5.0
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
2.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
2.5
2.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
2.5
2.5
2.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
2.5
2.5
Min. Packaging Q'ty
Part No.
EEUHD1A331( )
EEUHD1A471( )
EEUHD1A102( )
EEUHD1A222( )
EEUHD1A472( )
EEUHD1A682( )
EEUHD1A103( )
EEUHD1A153
EEUHD1A223
EEUHD1C101( )
EEUHD1C221( )
EEUHD1C331( )
EEUHD1C471( )
EEUHD1C332( )
EEUHD1C472( )
EEUHD1C682( )
EEUHD1C822( )
EEUHD1C103
EEUHD1C153
EEUHD1E470( )
EEUHD1E680( )
EEUHD1E101( )
EEUHD1E221( )
EEUHD1E331( )
EEUHD1E471( )
EEUHD1E102( )
EEUHD1E222( )
EEUHD1E332( )
EEUHD1E472( )
EEUHD1E562( )
EEUHD1E682
EEUHD1E103
EEUHD1V470( )
EEUHD1V101( )
EEUHD1V221( )
EEUHD1V331( )
EEUHD1V471( )
EEUHD1V681( )
EEUHD1V222( )
EEUHD1V332( )
EEUHD1V472
EEUHD1V682
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
200
200
100
100
50
200
200
200
200
200
200
100
100
100
50
200
200
200
200
200
200
200
200
200
100
100
100
50
200
200
200
200
200
200
200
100
100
50
2000
1000
500
500
500
500
250
2000
2000
1000
1000
500
500
250
250
2000
2000
2000
1000
1000
500
500
500
500
250
250
2000
2000
1000
500
500
500
500
250
· When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04 Mar. 2015
– EEE-105 –
Aluminum Electrolytic Capacitors/ HD
■ Standard Products
Endurance : 105 °C 05 to 08=1000 h, 010 to 018=2000 h
Case size
Speciﬁcation
Lead Length
Ripple
tan
EndurLead
d
Lead Space
Cap.
W.V.
ance Dia.
(±20 %) Dia. Length Current
(120 Hz) (120 Hz)
Straight Taping Taping
✽B
✽H
(+105 °C) (+20 °C)
(V)
(μF) (mm) (mm) (mA r.m.s.)
(hours) (mm) (mm) (mm) (mm)
50
2.2
5
11
18
0.12
1000
0.5
2.0
5.0
3.3
5
11
22
0.12
1000
0.5
2.0
4.7
5
11
26
0.12
1000
0.5
2.0
10
5
11
39
0.12
1000
0.5
2.0
Min. Packaging Q'ty
Part No.
Straight
Taping
Leads
(pcs)
(pcs)
200
2000
EEUHD1H3R3( )
200
2000
EEUHD1H4R7( )
200
2000
EEUHD1H100( )
200
2000
2.5
EEUHD1H2R2( )
5.0
2.5
5.0
2.5
5.0
2.5
22
5
11
65
0.12
1000
0.5
2.0
5.0
2.5
EEUHD1H220( )
200
2000
33
5
11
90
0.12
1000
0.5
2.0
5.0
2.5
EEUHD1H330( )
200
2000
47
6.3
11.2
110
0.12
1000
0.5
2.5
5.0
2.5
EEUHD1H470( )
200
2000
68
6.3
11.2
110
0.12
1000
0.5
2.5
5.0
2.5
EEUHD1H680( )
200
2000
100
8
11.5
180
0.12
1000
0.6
3.5
5.0
EEUHD1H101( )
200
1000
220
10
12.5
300
0.12
2000
0.6
5.0
5.0
EEUHD1H221( )
200
500
330
10
16
410
0.12
2000
0.6
5.0
5.0
EEUHD1H331( )
200
500
470
10
20
530
0.12
2000
0.6
5.0
5.0
EEUHD1H471( )
200
500
560
16
15
650
0.12
2000
0.8
7.5
7.5
EEUHD1H561S( )
100
250
680
16
15
650
0.12
2000
0.8
7.5
7.5
EEUHD1H681S( )
100
250
1000
12.5
25
950
0.12
2000
0.6
5.0
5.0
EEUHD1H102( )
200
500
2200
16
31.5
1470
0.14
2000
0.8
7.5
EEUHD1H222
100
3300
18
35.5
1770
0.16
2000
0.8
7.5
EEUHD1H332
50
· When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04 Mar. 2015
– EEE-106 –
Aluminum Electrolytic Capacitors/ GA
Radial Lead Type
Series:
GA
Type:
A
■ Features
● Endurance : 105 °C 1000 h
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan d
–55 °C to +105 °C
10 V.DC to 50 V.DC
1.5 μF to 220 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
Please see the attached standard products list
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), for 1000 hours, when
the capacitors are restored to 20 °C, the capacitors shall meet the limits speciﬁed below.
Endurance
Shelf Life
Capacitance change ±20 % of initial measured value
tan d
< 200 % of initial speciﬁed value
DC leakage current < initial speciﬁed value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits speciﬁed in Endurance. (With voltage treatment)
■ Frequency correction factor for ripple current
W.V.(V.DC)
10 to 50
Frequency (Hz)
Cap (μF)
1.5 to
220
60
120
1k
10 k
100 k to
0.85
1.00
1.30
1.40
1.55
■ Dimensions in mm(not to scale)
Sleeve
fd±0.05
(Unit : mm)
+
L±1.0
14 min.
3 min.
0D±0.5
F±0.5
–
Body Dia. 0D
4
5
6.3
8
Lead Dia. 0d
0.45
0.45
0.45
0.45
Lead space F
1.5
2.0
2.5
2.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04 Mar. 2015
– EEE-107 –
Aluminum Electrolytic Capacitors/ GA
■ Standard Products
Endurance : 105 °C 1000 h
Case size
W.V.
(V)
10
16
25
35
50
Speciﬁcation
Lead Length
Ripple tan d Endur- Lead
Lead Space
Cap.
ance Dia.
(±20 %) Dia. Length Current
Taping Taping
(120 Hz) (120 Hz)
Straight
✽B
✽H
(+105 °C) (+20 °C)
(hours) (mm) (mm) (mm) (mm)
(μF) (mm) (mm) (mA r.m.s.)
22
4
7
30
0.22
1000
0.45
33
5
47
6.3
7
50
0.22
1000
7
65
0.22
1000
Min. Packaging Q'ty
Part No.
Straight
Taping
Leads
(pcs)
(pcs)
1.5
5.0
2.5
EEAGA1A220( )
200
2000
0.45
2.0
5.0
2.5
EEAGA1A330( )
200
2000
0.45
2.5
5.0
2.5
EEAGA1A470( )
200
2000
68
6.3
7
75
0.22
1000
0.45
2.5
5.0
2.5
EEAGA1A680( )
200
2000
100
6.3
7
110
0.22
1000
0.45
2.5
5.0
2.5
EEAGA1A101( )
200
2000
220
8
7
160
0.22
1000
0.45
2.5
5.0
2.5
EEAGA1A221( )
200
1000
10
4
7
30
0.18
1000
0.45
1.5
5.0
2.5
EEAGA1C100( )
200
2000
15
4
7
33
0.18
1000
0.45
1.5
5.0
2.5
EEAGA1C150( )
200
2000
22
5
7
50
0.18
1000
0.45
2.0
5.0
2.5
EEAGA1C220( )
200
2000
33
6.3
7
65
0.18
1000
0.45
2.5
5.0
2.5
EEAGA1C330( )
200
2000
47
6.3
7
77
0.18
1000
0.45
2.5
5.0
2.5
EEAGA1C470( )
200
2000
100
8
7
120
0.18
1000
0.45
2.5
5.0
2.5
EEAGA1C101( )
200
1000
10
4
7
33
0.16
1000
0.45
1.5
5.0
2.5
EEAGA1E100( )
200
2000
15
5
7
45
0.16
1000
0.45
2.0
5.0
2.5
EEAGA1E150( )
200
2000
22
5
7
50
0.16
1000
0.45
2.0
5.0
2.5
EEAGA1E220( )
200
2000
33
6.3
7
75
0.16
1000
0.45
2.5
5.0
2.5
EEAGA1E330( )
200
2000
68
8
7
100
0.16
1000
0.45
2.5
5.0
2.5
EEAGA1E680( )
200
1000
6.8
4
7
33
0.13
1000
0.45
1.5
5.0
2.5
EEAGA1V6R8( )
200
2000
10
5
7
35
0.13
1000
0.45
2.0
5.0
2.5
EEAGA1V100( )
200
2000
15
6.3
7
50
0.13
1000
0.45
2.5
5.0
2.5
EEAGA1V150( )
200
2000
22
6.3
7
70
0.13
1000
0.45
2.5
5.0
2.5
EEAGA1V220( )
200
2000
47
8
7
96
0.13
1000
0.45
2.5
5.0
2.5
EEAGA1V470( )
200
1000
1.5
4
7
16
0.10
1000
0.45
1.5
5.0
2.5
EEAGA1H1R5( )
200
2000
2.2
4
7
18
0.10
1000
0.45
1.5
5.0
2.5
EEAGA1H2R2( )
200
2000
3.3
4
7
22
0.10
1000
0.45
1.5
5.0
2.5
EEAGA1H3R3( )
200
2000
4.7
4
7
26
0.10
1000
0.45
1.5
5.0
2.5
EEAGA1H4R7( )
200
2000
6.8
5
7
35
0.10
1000
0.45
2.0
5.0
2.5
EEAGA1H6R8( )
200
2000
10
6.3
7
39
0.10
1000
0.45
2.5
5.0
2.5
EEAGA1H100( )
200
2000
15
6.3
7
55
0.10
1000
0.45
2.5
5.0
2.5
EEAGA1H150( )
200
2000
22
8
7
70
0.10
1000
0.45
2.5
5.0
2.5
EEAGA1H220( )
200
1000
33
8
7
91
0.10
1000
0.45
2.5
5.0
2.5
EEAGA1H330( )
200
1000
· When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, H=2.5 mm.
Sufﬁx "BQ" for 08×7, 5mm pitch products
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04 Mar. 2015
– EEE-108 –
Aluminum Electrolytic Capacitors/ GA(Bi-polar)
Radial Lead Type
Series:
GA(Bi-polar)
Type:
A
■ Features
● Endurance : 105 °C 1000 h to 2000 h
● RoHS directive compliant
■ Specifications
Category Temp. Range
–40 °C to +105 °C
Rated W.V. Range
6.3 V.DC to 50 V.DC
Nominal Cap. Range
2.2 μF to 330 μF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
I < 0.03 CV +3 (μA) After 2 minutes
or
I < 0.03 CV or 3 (μA) After 5 minutes (Whichever is greater)
DC Leakage Current
tan d
Please see the attached standard products list
After following life test of DC working voltage at +105 °C±2 °C
when the capacitors are restored to 20 °C, the capacitors shall meet the following limits.
Duration
05 to 08 : 1000 hours (500 hours for each polarity)
: 2000 hours (1000 hours for each polarity)
010
Endurance
Capacitance change ± 20% of initial measured value
tan d
< 200 % of initial speciﬁed value
DC leakage current
< initial speciﬁed value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits speciﬁed in Endurance. (With voltage treatment)
Shelf Life
■ Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
50, 60
120
1k
10 k to
0.70
1.00
1.30
1.70
■ Dimensions in mm (not to scale)
fd±0.05
(Unit : mm)
L=
14 min.
08
0D±0.5
3 min.
010
F±0.5
Sleeve
Pressure relief
06.3
0D±0.5
=L16 : L±1.0
L20 : L±2.0
Body Dia. 0D
5
6.3
8
10
Lead Dia. 0d
0.5
Lead space F
2.0
0.5
0.6
0.6
2.5
3.5
5.0
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-109 –
Aluminum Electrolytic Capacitors/ GA(Bi-polar)
■ Standard Products (Bi-polar)
Endurance : 105 °C 05 to 08=1000 h (500 h for each polarity), 010=2000 h (1000 h for each polarity)
Case size
W.V.
(V)
6.3
10
16
25
35
50
Cap.
(±20 %)
Dia.
(μF)
(mm)
100
6.3
Speciﬁcation
Ripple tan d
Current
Length
(120 Hz) (120 Hz)
(+105 °C) (+20 °C)
(mm) (mA r.m.s.)
Lead Length
Lead
Dia.
Min. Packaging Q'ty
Lead Space
Straight
Taping Taping
✽B
✽i
Part No.
(mm)
(mm)
(mm)
(mm)
0.5
2.5
5.0
2.5
ECA0JEN101( )
Straight
Taping
Leads
(pcs)
(pcs)
200
2000
11.2
130
0.30
250
0.30
0.6
3.5
5.0
ECA0JEN331( )
200
1000
90
0.24
0.5
2.0
5.0
2.5
ECA1AEN470( )
200
2000
330
8
11.5
47
5
11
10
5
11
40
0.20
0.5
2.0
5.0
2.5
ECA1CEN100( )
200
2000
22
5
11
60
0.20
0.5
2.0
5.0
2.5
ECA1CEN220( )
200
2000
33
5
11
47
6.3
11.2
80
0.20
0.5
2.0
5.0
2.5
ECA1CEN330( )
200
2000
100
0.20
0.5
2.5
5.0
2.5
ECA1CEN470( )
200
2000
10
5
22
6.3
11
45
0.15
0.5
2.0
5.0
2.5
ECA1EEN100( )
200
2000
11.2
60
0.15
0.5
2.5
5.0
2.5
ECA1EEN220( )
200
2000
33
6.3
11.2
90
0.15
0.5
2.5
5.0
2.5
ECA1EEN330( )
200
2000
47
6.3
11.2
110
0.15
0.5
2.5
5.0
2.5
ECA1EEN470( )
200
2000
100
8
11.5
180
0.15
0.6
3.5
5.0
ECA1EEN101( )
200
1000
33
8
11.5
100
0.15
0.6
3.5
5.0
ECA1VEN330( )
200
1000
100
10
16
230
0.15
0.6
5.0
5.0
ECA1VEN101( )
200
500
2.2
5
11
18
0.15
0.5
2.0
5.0
2.5
ECA1HEN2R2( )
200
2000
3.3
5
11
25
0.15
0.5
2.0
5.0
2.5
ECA1HEN3R3( )
200
2000
4.7
5
11
30
0.15
0.5
2.0
5.0
2.5
ECA1HEN4R7( )
200
2000
10
6.3
11.2
50
0.15
0.5
2.5
5.0
2.5
ECA1HEN100( )
200
2000
22
8
11.5
90
0.15
0.6
3.5
5.0
ECA1HEN220( )
200
1000
33
8
11.5
110
0.15
0.6
3.5
5.0
ECA1HEN330( )
200
1000
47
10
12.5
140
0.15
0.6
5.0
5.0
ECA1HEN470( )
200
500
100
10
20
250
0.15
0.6
5.0
5.0
ECA1HEN101( )
200
500
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-110 –
Aluminum Electrolytic Capacitors/ M
Radial Lead Type
Series:
M
Type:
A
■ Features
● Endurance : 85 °C 2000 h
● Smaller than series SU
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
–40 °C to + 85 °C
–25 °C to +85 °C
6.3 V.DC to 100 V.DC
160 V.DC to 450 V.DC
2.2 μF to 22000 μF
1 μF to 470 μF
Nominal Cap. Range
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA) After 2 minutes
(Whichever is greater)
DC Leakage Current
tan d
I < 0.06 CV +10 (μA) After 2 minutes
Please see the attached standard products list
After applying rated working voltage for 2000 hours at +85°C±2 °C, when the capacitors are
restored to 20 °C, capacitors shall meet the following limits.
Endurance
Capacitance change ±20 % of initial measured value
tan d
<150 % of initial speciﬁed value
DC leakage current
<initial speciﬁed value
After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits speciﬁed in Endurance. (With voltage treatment)
Shelf Life
■ Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
50, 60
120
1k
10 k to
0.70
1.00
1.30
1.70
■ Dimensions in mm (not to scale)
fd±0.05
(Unit : mm)
Sleeve
Pressure relief
06.3
08
010
+
L=
14 min.
0D+0.5
3 min.
F±0.5
–
0D+0.5
=L16 : L±1.0
L20 : L±2.0
Body Dia. 0D
5
6.3
8
10
Lead Dia. 0d
0.5
Lead space F
2.0
12.5
16
18
0.5
0.6
2.5
3.5
0.6
0.6
0.8
0.8
5.0
5.0
7.5
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-111 –
Aluminum Electrolytic Capacitors/ M
■ Standard Products
Endurance : 85 °C 2000 h
Case size
W.V.
(V)
6.3
Cap.
(±20 %)
(μF)
Straight
(mm)
(mm)
Taping Taping
✽B
✽i
(mm)
Part No.
(mm)
Straight
Taping
Leads
(pcs)
(pcs)
5
11
240
0.28
0.5
2.0
5.0
2.5
ECA0JM221( )
200
2000
11.2
380
0.28
0.5
2.5
5.0
2.5
ECA0JM471( )
200
2000
1000
8
11.5
580
0.28
0.6
3.5
5.0
ECA0JM102( )
200
1000
2200
10
16
890
0.30
0.6
5.0
5.0
ECA0JM222( )
200
500
3300
10
20
1020
0.32
0.6
5.0
5.0
ECA0JM332( )
200
500
4700
12.5
20
1170
0.34
0.6
5.0
5.0
ECA0JM472( )
200
500
6800
12.5
25
1270
0.38
0.6
5.0
5.0
ECA0JM682( )
200
500
10000
16
25
1450
0.46
0.8
7.5
7.5
ECA0JM103( )
100
250
15000
16
31.5
1700
0.56
0.8
7.5
ECA0JM153
100
18
35.5
1900
0.70
0.8
7.5
330
6.3
11.2
330
0.24
0.5
2.5
5.0
1000
10
12.5
630
0.24
0.6
5.0
5.0
ECA1AM102( )
200
500
2200
10
20
920
0.26
0.6
5.0
5.0
ECA1AM222( )
200
500
ECA0JM223
2.5
ECA1AM331( )
50
200
2000
3300
12.5
20
1090
0.28
0.6
5.0
5.0
ECA1AM332( )
200
500
4700
12.5
25
1200
0.30
0.6
5.0
5.0
ECA1AM472( )
200
500
6800
16
25
1400
0.34
0.8
7.5
7.5
ECA1AM682( )
100
250
10000
16
31.5
1600
0.42
0.8
7.5
ECA1AM103
100
1850
0.52
0.8
7.5
30
0.20
0.5
2.0
5.0
18
35.5
5
11
ECA1AM153
2.5
ECA1CM100( )
50
200
2000
22
5
11
75
0.20
0.5
2.0
5.0
2.5
ECA1CM220( )
200
2000
33
5
11
110
0.20
0.5
2.0
5.0
2.5
ECA1CM330( )
200
2000
47
5
11
130
0.20
0.5
2.0
5.0
2.5
ECA1CM470( )
200
2000
100
5
11
180
0.20
0.5
2.0
5.0
2.5
ECA1CM101( )
200
2000
220
6.3
11.2
280
0.20
0.5
2.5
5.0
2.5
ECA1CM221( )
200
2000
470
8
11.5
440
0.20
0.6
3.5
5.0
ECA1CM471( )
200
1000
1000
10
16
680
0.20
0.6
5.0
5.0
ECA1CM102( )
200
500
2200
12.5
20
1000
0.22
0.6
5.0
5.0
ECA1CM222( )
200
500
3300
12.5
25
1200
0.24
0.6
5.0
5.0
ECA1CM332( )
200
500
4700
16
25
1360
0.26
0.8
7.5
7.5
ECA1CM472( )
100
250
6800
16
31.5
1600
0.30
0.8
7.5
ECA1CM682
100
10000
18
35.5
1800
0.38
0.8
7.5
ECA1CM103
50
100
6.3
11.2
180
0.16
0.5
2.5
5.0
ECA1EM101( )
200
2000
330
8
11.5
390
0.16
0.6
3.5
5.0
ECA1EM331( )
200
1000
470
10
12.5
480
0.16
0.6
5.0
5.0
ECA1EM471( )
200
500
1000
10
20
850
0.16
0.6
5.0
5.0
ECA1EM102( )
200
500
2.5
2200
12.5
25
1200
0.18
0.6
5.0
5.0
ECA1EM222( )
200
500
3300
16
25
1300
0.20
0.8
7.5
7.5
ECA1EM332( )
100
250
4700
16
31.5
1500
0.22
0.8
7.5
ECA1EM472
100
6800
18
35.5
1750
0.26
0.8
7.5
ECA1EM682
50
47
35
Lead Space
6.3
10
25
Lead
Dia.
Min. Packaging Q'ty
470
15000
16
(mm)
Lead Length
220
22000
10
Dia.
Speciﬁcation
Ripple tan d
Current
Length
(120 Hz) (120 Hz)
(+85 °C) (+20 °C)
(mm) (mA r.m.s.)
5
11
130
0.14
0.5
2.0
5.0
2.5
ECA1VM470( )
200
2000
100
6.3
11.2
210
0.14
0.5
2.5
5.0
2.5
ECA1VM101( )
200
2000
220
8
11.5
350
0.14
0.6
3.5
5.0
ECA1VM221( )
200
1000
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-112 –
Aluminum Electrolytic Capacitors/ M
■ Standard Products
Endurance : 85 °C 2000 h
Case size
W.V.
(V)
Cap.
(±20 %)
(μF)
(mm)
330
10
470
35
50
63
100
Dia.
Speciﬁcation
Ripple tan d
Current
Length
(120 Hz) (120 Hz)
(+85 °C) (+20 °C)
(mm) (mA r.m.s.)
12.5
Lead Length
Lead
Dia.
Lead Space
Straight
Taping Taping
✽B
✽i
(mm)
(mm)
(mm)
5.0
5.0
440
0.14
0.6
Min. Packaging Q'ty
Part No.
(mm)
Straight
Taping
Leads
(pcs)
(pcs)
ECA1VM331( )
200
500
10
16
550
0.14
0.6
5.0
5.0
ECA1VM471( )
200
500
1000
12.5
20
900
0.14
0.6
5.0
5.0
ECA1VM102( )
200
500
7.5
ECA1VM222( )
100
250
ECA1VM332
100
2200
16
25
1250
0.16
0.8
7.5
3300
16
31.5
1400
0.18
0.8
7.5
4700
18
35.5
1600
0.20
0.8
7.5
2.2
5
11
20
0.12
0.5
2.0
5.0
3.3
5
11
35
0.12
0.5
2.0
4.7
5
11
45
0.12
0.5
2.0
ECA1VM472
50
2.5
ECA1HM2R2( )
200
2000
5.0
2.5
ECA1HM3R3( )
200
2000
5.0
2.5
ECA1HM4R7( )
200
2000
10
5
11
65
0.12
0.5
2.0
5.0
2.5
ECA1HM100( )
200
2000
22
5
11
100
0.12
0.5
2.0
5.0
2.5
ECA1HM220( )
200
2000
33
5
11
110
0.12
0.5
2.0
5.0
2.5
ECA1HM330( )
200
2000
47
6.3
11.2
130
0.12
0.5
2.5
5.0
2.5
ECA1HM470( )
200
2000
8
11.5
250
0.12
0.6
3.5
5.0
ECA1HM101( )
200
1000
100
220
10
12.5
400
0.12
0.6
5.0
5.0
ECA1HM221( )
200
500
330
10
16
500
0.12
0.6
5.0
5.0
ECA1HM331( )
200
500
470
10
20
650
0.12
0.6
5.0
5.0
ECA1HM471( )
200
500
1000
12.5
25
1050
0.12
0.6
5.0
5.0
ECA1HM102( )
200
500
2200
16
31.5
1300
0.14
0.8
7.5
ECA1HM222
100
3300
18
35.5
1500
0.16
0.8
7.5
ECA1HM332
50
10
5
11
70
0.11
0.5
2.0
5.0
2.5
ECA1JM100( )
200
2000
22
5
11
105
0.11
0.5
2.0
5.0
2.5
ECA1JM220( )
200
2000
33
6.3
11.2
130
0.11
0.5
2.5
5.0
2.5
ECA1JM330( )
200
2000
47
6.3
11.2
160
0.11
0.5
2.5
5.0
2.5
ECA1JM470( )
200
2000
8
11.5
270
0.11
0.6
3.5
5.0
ECA1JM101( )
200
1000
100
220
10
16
450
0.11
0.6
5.0
5.0
ECA1JM221( )
200
500
330
10
20
550
0.11
0.6
5.0
5.0
ECA1JM331( )
200
500
470
12.5
20
750
0.11
0.6
5.0
5.0
ECA1JM471( )
200
500
1000
16
25
1100
0.11
0.8
7.5
7.5
ECA1JM102( )
100
250
2200
18
35.5
1400
0.13
0.8
7.5
2.2
5
11
30
0.10
0.5
2.0
3.3
5
11
40
0.10
0.5
2.0
5.0
2.5
ECA2AM3R3( )
200
2000
4.7
5
11
50
0.10
0.5
2.0
5.0
2.5
ECA2AM4R7( )
200
2000
10
5
11
70
0.10
0.5
2.0
5.0
2.5
ECA2AM100( )
200
2000
22
6.3
11.2
115
0.10
0.5
2.5
5.0
2.5
ECA2AM220( )
200
2000
ECA1JM222
5.0
2.5
ECA2AM2R2( )
50
200
2000
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-113 –
Aluminum Electrolytic Capacitors/ M
■ Standard Products
Endurance : 85 °C 2000 h
Case size
W.V.
(V)
100
160
200
250
Cap.
(±20 %)
(μF)
(mm)
Lead Length
Lead
Dia.
Min. Packaging Q'ty
Lead Space
Straight
Taping Taping
✽B
✽i
(mm)
(mm)
(mm)
Part No.
(mm)
Straight
Taping
Leads
(pcs)
(pcs)
33
8
11.5
145
0.10
0.6
3.5
5.0
ECA2AM330( )
200
1000
47
8
11.5
180
0.10
0.6
3.5
5.0
ECA2AM470( )
200
1000
100
10
16
350
0.10
0.6
5.0
5.0
ECA2AM101( )
200
500
220
12.5
20
550
0.10
0.6
5.0
5.0
ECA2AM221( )
200
500
330
12.5
25
700
0.10
0.6
5.0
5.0
ECA2AM331( )
200
500
7.5
ECA2AM471( )
100
250
470
16
25
900
0.10
0.8
7.5
1000
18
35.5
1300
0.10
0.8
7.5
ECA2AM102
50
1
6.3
11.2
36
0.16
0.5
2.5
5.0
2.5
ECA2CM010( )
200
2000
2.2
6.3
11.2
53
0.16
0.5
2.5
5.0
2.5
ECA2CM2R2( )
200
2000
3.3
6.3
11.2
66
0.16
0.5
2.5
5.0
2.5
ECA2CM3R3( )
200
2000
4.7
6.3
11.2
78
0.16
0.5
2.5
5.0
2.5
ECA2CM4R7( )
200
2000
10
10
12.5
105
0.16
0.6
5.0
5.0
ECA2CM100( )
200
500
22
10
16
175
0.16
0.6
5.0
5.0
ECA2CM220( )
200
500
33
10
20
235
0.16
0.6
5.0
5.0
ECA2CM330( )
200
500
47
12.5
20
320
0.16
0.6
5.0
5.0
ECA2CM470( )
200
500
5.0
500
100
12.5
25
515
0.16
0.6
5.0
ECA2CM101( )
200
220
16
31.5
830
0.16
0.8
7.5
ECA2CM221
100
330
18
31.5
1090
0.16
0.8
7.5
ECA2CM331
50
470
18
40
1440
0.16
0.8
7.5
ECA2CM471
50
1
6.3
11.2
34
0.18
0.5
2.5
5.0
2.5
ECA2DM010( )
200
2000
2.2
6.3
11.2
50
0.18
0.5
2.5
5.0
2.5
ECA2DM2R2( )
200
2000
3.3
6.3
11.2
62
0.18
0.5
2.5
5.0
2.5
ECA2DM3R3( )
200
2000
4.7
8
11.5
86
0.18
0.6
3.5
5.0
ECA2DM4R7( )
200
1000
10
10
12.5
100
0.18
0.6
5.0
5.0
ECA2DM100( )
200
500
22
10
20
180
0.18
0.6
5.0
5.0
ECA2DM220( )
200
500
33
10
20
220
0.18
0.6
5.0
5.0
ECA2DM330( )
200
500
47
12.5
20
300
0.18
0.6
5.0
5.0
ECA2DM470( )
200
500
100
16
25
475
0.18
0.8
7.5
7.5
ECA2DM101( )
100
250
220
18
31.5
835
0.18
0.8
7.5
ECA2DM221
330
18
40
1140
0.18
0.8
7.5
1
6.3
11.2
34
0.18
0.5
2.5
5.0
2.5
ECA2DM331
2.5
2.2
6.3
11.2
50
0.18
0.5
2.5
5.0
3.3
8
11.5
72
0.18
0.6
3.5
5.0
4.7
8
11.5
10
10
16
ECA2EM010( )
50
50
200
2000
ECA2EM2R2( )
200
2000
ECA2EM3R3( )
200
1000
86
0.18
0.6
3.5
5.0
ECA2EM4R7( )
200
1000
110
0.18
0.6
5.0
5.0
ECA2EM100( )
200
500
22
10
20
180
0.18
0.6
5.0
5.0
ECA2EM220( )
200
500
33
12.5
20
250
0.18
0.6
5.0
5.0
ECA2EM330( )
200
500
47
12.5
25
330
0.18
0.6
5.0
5.0
ECA2EM470( )
200
500
16
31.5
530
0.18
0.8
7.5
ECA2EM101
100
100
350
Dia.
Speciﬁcation
Ripple tan d
Current
Length
(120 Hz) (120 Hz)
(+85 °C) (+20 °C)
(mm) (mA r.m.s.)
220
18
40
930
0.18
0.8
7.5
1
6.3
11.2
32
0.20
0.5
2.5
5.0
8
11.5
55
0.20
0.6
3.5
5.0
2.2
ECA2EM221
2.5
50
ECA2VM010( )
200
2000
ECA2VM2R2( )
200
1000
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-114 –
Aluminum Electrolytic Capacitors/ M
■ Standard Products
Endurance : 85 °C 2000 h
Case size
W.V.
(V)
350
400
450
Cap.
(±20 %)
(μF)
Dia.
(mm)
Speciﬁcation
Ripple tan d
Current
Length
(120 Hz) (120 Hz)
(+85 °C) (+20 °C)
(mm) (mA r.m.s.)
Lead Length
Lead
Dia.
Min. Packaging Q'ty
Lead Space
Straight
Taping Taping
✽B
✽i
(mm)
(mm)
(mm)
Part No.
(mm)
Straight
Taping
Leads
(pcs)
(pcs)
3.3
8
11.5
60
0.20
0.6
3.5
5.0
ECA2VM3R3( )
200
1000
4.7
10
12.5
65
0.20
0.6
5.0
5.0
ECA2VM4R7( )
200
500
10
10
20
115
0.20
0.6
5.0
5.0
ECA2VM100( )
200
500
22
12.5
20
195
0.20
0.6
5.0
5.0
ECA2VM220( )
200
500
33
16
25
300
0.20
0.8
7.5
7.5
ECA2VM330( )
100
250
7.5
ECA2VM470( )
100
250
47
16
25
325
0.20
0.8
7.5
100
18
31.5
535
0.20
0.8
7.5
1
ECA2VM101
2.5
50
6.3
11.2
32
0.20
0.5
2.5
5.0
2.2
8
11.5
50
0.20
0.6
3.5
5.0
ECA2GM010( )
200
2000
ECA2GM2R2( )
200
1000
3.3
10
12.5
54
0.20
0.6
5.0
5.0
ECA2GM3R3( )
200
500
4.7
10
16
72
0.20
0.6
5.0
5.0
ECA2GM4R7( )
200
500
10
10
20
115
0.20
0.6
5.0
5.0
ECA2GM100( )
200
500
22
12.5
25
215
0.20
0.6
5.0
5.0
ECA2GM220( )
200
500
33
16
25
275
0.20
0.8
7.5
7.5
ECA2GM330( )
100
250
47
16
31.5
350
0.20
0.8
7.5
ECA2GM470
100
100
18
40
600
0.20
0.8
7.5
1
8
11.5
37
0.20
0.6
3.5
ECA2GM101
5.0
ECA2WM010( )
50
200
1000
2.2
10
12.5
44
0.20
0.6
5.0
5.0
ECA2WM2R2( )
200
500
3.3
10
16
60
0.20
0.6
5.0
5.0
ECA2WM3R3( )
200
500
4.7
10
20
79
0.20
0.6
5.0
5.0
ECA2WM4R7( )
200
500
10
12.5
20
130
0.20
0.6
5.0
5.0
ECA2WM100( )
200
500
7.5
ECA2WM220( )
100
250
ECA2WM330
100
22
16
25
210
0.20
0.8
7.5
33
16
31.5
285
0.20
0.8
7.5
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-115 –
Aluminum Electrolytic Capacitors/ SU(Bi-polar)
Radial Lead Type
Series:
SU(Bi-polar)
Type:
A
■ Features
● Endurance : 85 °C 2000 h
● RoHS directive compliant
■ Specifications
Category Temp. Range
–40 °C to +85 °C
Rated W.V. Range
6.3 V.DC to 50 V.DC
Nominal Cap. Range
2.2 μF to 6800 μF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
I < 0.03 CV +3 (μA) After 5 minutes
DC Leakage Current
tan d
Please see the attached standard products list.
After 2000 hours application of DC working voltage (1000 hours for each polarity) at +85 °C±2 °C,
when the capacitors are restored to 20 °C, the capacitors shall meet the following limits.
Capacitance change ± 20 % of initial measured value
Endurance
tan d
< 150 % of initial speciﬁed value
DC leakage current
< initial speciﬁed value
After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
at +20 °C capacitors shall meet the limits speciﬁed in Endurance. (With voltage treatment)
Shelf Life
■ Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
50, 60
120
1k
10 k to
0.70
1.00
1.30
1.70
■ Dimensions in mm (not to scale)
fd±0.05
(Unit : mm)
L=
14 min.
08
0D±0.5
3 min.
010
F±0.5
Sleeve
Pressure relief
06.3
0D±0.5
=L16 : L±1.0
L20 : L±2.0
Body Dia. 0D
5
6.3
8
10
12.5
16
18
Lead Dia. 0d
0.5
0.5
0.6
0.6
0.6
0.8
0.8
Lead space F
2.0
2.5
3.5
5.0
5.0
7.5
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-116 –
Aluminum Electrolytic Capacitors/ SU(Bi-polar)
■ Standard Products (Bi-polar)
Endurance: 85 °C 2000 h (1000 hours for each polarity)
Case size
W.V.
(V)
6.3
10
16
25
35
Cap.
(±20 %)
Dia.
(μF)
(mm)
330
470
1000
2200
3300
4700
6800
47
100
220
330
470
1000
2200
3300
4700
10
22
33
47
220
330
470
1000
2200
3300
10
22
33
47
100
220
330
470
1000
2200
10
22
33
47
100
220
330
470
8
10
10
12.5
16
16
18
5
6.3
8
10
10
12.5
16
16
18
5
5
5
6.3
10
10
10
12.5
16
18
5
5
6.3
6.3
8
10
12.5
12.5
16
18
5
6.3
8
8
10
12.5
12.5
12.5
Speciﬁcation
Ripple tan d
Current
Length
(120 Hz) (120 Hz)
(+85 °C) (+20 °C)
(mm) (mA r.m.s.) (Ω)
11.5
12.5
20
25
25
31.5
35.5
11
11.2
11.5
16
16
20
25
31.5
35.5
11
11
11
11.2
12.5
16
20
25
31.5
35.5
11
11
11.2
11.2
11.5
16
20
20
25
35.5
11
11.2
11.5
11.5
16
20
20
25
250
310
430
660
760
1170
1450
90
130
200
280
340
470
690
1090
1200
40
60
80
100
260
330
380
560
750
900
45
60
90
110
180
320
350
430
680
900
43
80
100
120
230
360
450
590
0.30
0.30
0.30
0.32
0.34
0.36
0.40
0.25
0.25
0.25
0.25
0.25
0.25
0.27
0.29
0.31
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.22
0.24
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.17
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
Lead Length
Lead
Dia.
Min. Packaging Q'ty
Lead Space
Straight
Taping Taping
✽B
✽i
(mm)
(mm)
(mm)
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.5
0.5
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.8
0.8
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.8
0.8
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
3.5
5.0
5.0
5.0
7.5
7.5
7.5
2.0
2.5
3.5
5.0
5.0
5.0
7.5
7.5
7.5
2.0
2.0
2.0
2.5
5.0
5.0
5.0
5.0
7.5
7.5
2.0
2.0
2.5
2.5
3.5
5.0
5.0
5.0
7.5
7.5
2.0
2.5
3.5
3.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
Part No.
(mm)
5.0
5.0
5.0
5.0
5.0
5.0
7.5
2.5
2.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
2.5
2.5
2.5
2.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
2.5
2.5
2.5
2.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
2.5
2.5
ECEA0JN331U( )
ECEA0JN471X( )
ECEA0JN102U( )
ECEA0JN222U( )
ECEA0JN332U( )
ECEA0JN472U
ECEA0JN682U
ECEA1AN470U( )
ECEA1AN101X( )
ECEA1AN221U( )
ECEA1AN331U( )
ECEA1AN471U( )
ECEA1AN102X( )
ECEA1AN222U( )
ECEA1AN332U
ECEA1AN472U
ECEA1CN100U( )
ECEA1CN220U( )
ECEA1CN330U( )
ECEA1CN470U( )
ECEA1CN221X( )
ECEA1CN331U( )
ECEA1CN471U( )
ECEA1CN102U( )
ECEA1CN222U
ECEA1CN332U
ECEA1EN100U( )
ECEA1EN220X( )
ECEA1EN330U( )
ECEA1EN470U( )
ECEA1EN101U( )
ECEA1EN221U( )
ECEA1EN331U( )
ECEA1EN471U( )
ECEA1EN102U( )
ECEA1EN222U
ECEA1VN100U( )
ECEA1VN220U( )
ECEA1VN330U( )
ECEA1VN470U( )
ECEA1VN101U( )
ECEA1VN221U( )
ECEA1VN331U( )
ECEA1VN471U( )
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
100
100
50
200
200
200
200
200
200
100
100
50
200
200
200
200
200
200
200
200
100
50
200
200
200
200
200
200
200
200
100
50
200
200
200
200
200
200
200
200
1000
500
500
500
250
2000
2000
1000
500
500
500
250
2000
2000
2000
2000
500
500
500
500
2000
2000
2000
2000
1000
500
500
500
250
2000
2000
1000
1000
500
500
500
500
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-117 –
Aluminum Electrolytic Capacitors/ SU(Bi-polar)
■ Standard Products (Bi-polar)
Endurance: 85 °C 2000 h (1000 hours for each polarity)
Case size
W.V.
Cap.
(±20 %)
Dia.
(V)
(μF)
(mm)
50
2.2
3.3
4.7
10
22
33
47
100
220
330
470
5
5
5
6.3
8
8
10
10
12.5
16
16
Speciﬁcation
Ripple tan d
Current
Length
(120 Hz) (120 Hz)
(+85 °C) (+20 °C)
(mm) (mA r.m.s.) (Ω)
11
11
11
11.2
11.5
11.5
12.5
20
25
25
31.5
18
25
30
50
90
110
140
250
360
450
590
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
Lead Length
Lead
Dia.
Min. Packaging Q'ty
Lead Space
Straight
Taping Taping
✽B
✽i
(mm)
(mm)
(mm)
(mm)
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.8
0.8
2.0
2.0
2.0
2.5
3.5
3.5
5.0
5.0
5.0
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
2.5
2.5
2.5
2.5
Part No.
ECEA1HN2R2U( )
ECEA1HN3R3U( )
ECEA1HN4R7U( )
ECEA1HN100U( )
ECEA1HN220U( )
ECEA1HN330U( )
ECEA1HN470U( )
ECEA1HN101U( )
ECEA1HN221U( )
ECEA1HN331U( )
ECEA1HN471U
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
200
200
200
200
200
100
100
2000
2000
2000
2000
1000
1000
500
500
500
250
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-118 –
Aluminum Electrolytic Capacitors/ KA
Low Proﬁle
Radial Lead Type
Series:
KA
Type:
KA
A
7 mm height
↑
M
■ Features
● Endurance : 85° C 1000 h
● 7 mm height
● RoHS directive compliant
■ Specifications
Category Temp. Range
–40 °C to +85 °C
Rated W.V. Range
4 V.DC to 50 V.DC
Nominal Cap. Range
2.2 μF to 470 μF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
DC Leakage Current
tan d
Please see the attached standard products list
After applying rated working voltage for 1000 hours at +85 °C±2 °C when the capacitors are
restored to 20 °C, capacitors shall meet the following limits.
Endurance
Shelf Life
Capacitance change ± 20% of initial measured value
tan d
< 200 % of initial speciﬁed value
DC leakage current
< initial speciﬁed value
After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits speciﬁed in Endurance (With voltage treatment)
■ Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
50, 60
120
1k
10 k to
0.70
1.00
1.30
1.70
■ Dimensions in mm (not to scale)
Sleeve
fd±0.05
(Unit : mm)
+
L±1.0
14 min.
3 min.
0D±0.5
F±0.5
–
Body Dia. 0D
4
5
6.3
8
Lead Dia. 0d
0.45
0.45
0.45
0.45
Lead space F
1.5
2.0
2.5
2.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-119 –
Aluminum Electrolytic Capacitors/ KA
■ Standard Products
Endurance : 85 °C 1000 h
Case size
W.V.
(V)
Cap.
(±20 %)
(μF)
47
4
25
35
34
0.35
Straight
Taping Taping
✽B
✽i
(mm)
(mm)
(mm)
(mm)
0.45
1.5
5.0
2.5
Part No.
ECEA0GKA470( )
Straight
Taping
Leads
(pcs)
(pcs)
200
2000
5
7
61
0.35
0.45
2.0
5.0
2.5
ECEA0GKA101( )
200
2000
7
82
0.35
0.45
2.5
5.0
2.5
ECEA0GKA221( )
200
2000
2.5
ECEA0GKA331( )
200
330
8
7
110
0.35
0.45
8
7
110
0.35
0.45
8
7
140
0.35
0.45
8
7
140
0.35
0.45
2.5
5.0
2.5
ECEA0GKA331Q
2.5
5.0
ECEA0GKA471( )
1000
1000
200
ECEA0GKA471Q
1000
1000
47
4
7
46
0.24
0.45
1.5
5.0
2.5
ECEA0JKA470( )
200
2000
100
5
7
71
0.24
0.45
2.0
5.0
2.5
ECEA0JKA101( )
200
2000
220
6.3
7
103
0.24
0.45
2.5
5.0
2.5
ECEA0JKA221( )
200
2000
8
7
130
0.24
0.45
2.5
2.5
ECEA0JKA331( )
200
1000
8
7
130
0.24
0.45
5.0
ECEA0JKA331Q
1000
33
4
7
43
0.20
0.45
1.5
5.0
2.5
ECEA1AKA330( )
200
2000
100
6.3
7
80
0.20
0.45
2.5
5.0
2.5
ECEA1AKA101( )
200
2000
2.5
ECEA1AKA221( )
200
8
7
120
0.20
0.45
8
7
120
0.20
0.45
2.5
5.0
ECEA1AKA221Q
1000
1000
10
4
7
28
0.16
0.45
1.5
5.0
2.5
ECEA1CKA100( )
200
2000
22
4
7
39
0.16
0.45
1.5
5.0
2.5
ECEA1CKA220( )
200
2000
33
5
7
60
0.16
0.45
2.0
5.0
2.5
ECEA1CKA330( )
200
2000
47
5
7
70
0.16
0.45
2.0
5.0
2.5
ECEA1CKA470( )
200
2000
100
6.3
7
91
0.16
0.45
2.5
5.0
2.5
ECEA1CKA101( )
200
2000
10
4
7
28
0.14
0.45
1.5
5.0
2.5
ECEA1EKA100( )
200
2000
22
5
7
55
0.14
0.45
2.0
5.0
2.5
ECEA1EKA220( )
200
2000
33
6.3
7
65
0.14
0.45
2.5
5.0
2.5
ECEA1EKA330( )
200
2000
47
6.3
7
70
0.14
0.45
2.5
5.0
2.5
ECEA1EKA470( )
200
2000
10
5
7
30
0.12
0.45
2.0
5.0
2.5
ECEA1VKA100( )
200
2000
22
6.3
7
60
0.12
0.45
2.5
5.0
2.5
ECEA1VKA220( )
200
2000
33
6.3
7
65
0.12
0.45
2.5
5.0
2.5
ECEA1VKA330( )
200
2000
8
7
85
0.12
0.45
2.5
2.5
ECEA1VKA470( )
200
1000
8
7
85
0.12
0.45
4
7
16
0.10
0.45
200
2000
47
2.2
50
7
Lead Space
6.3
220
16
4
Lead
Dia.
Min. Packaging Q'ty
100
330
10
(mm)
Lead Length
220
470
6.3
Dia.
Speciﬁcation
Ripple tan d
Current
Length
(120 Hz) (120 Hz)
(+85 °C) (+20 °C)
(mm) (mA r.m.s.)
5.0
1.5
5.0
1000
ECEA1VKA470Q
2.5
ECEA1HKA2R2( )
3.3
4
7
18
0.10
0.45
1.5
5.0
2.5
ECEA1HKA3R3( )
200
2000
4.7
4
7
23
0.10
0.45
1.5
5.0
2.5
ECEA1HKA4R7( )
200
2000
10
5
7
35
0.10
0.45
2.0
5.0
2.5
ECEA1HKA100( )
200
2000
22
6.3
7
60
0.10
0.45
2.5
5.0
2.5
ECEA1HKA220( )
200
2000
8
7
75
0.10
0.45
2.5
2.5
ECEA1HKA330( )
200
1000
8
7
75
0.10
0.45
33
5.0
ECEA1HKA330Q
1000
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-120 –
Aluminum Electrolytic Capacitors/ KA-(Bi-polar)
Radial Lead Type
Series:
KA(Bi-polar)
Type:
A
■ Features
● Endurance : 85° C 1000 h
● 7 mm height
● RoHS directive compliant
■ Specifications
Category Temp. Range
–40 °C to +85 °C
Rated W.V. Range
4 V.DC to 50 V.DC
Nominal Cap. Range
2.2 μF to 100 μF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
I < 0.05 CV or 10 (μA) After 2 minutes (Whichever is greater)
DC Leakage Current
tan d
Please see the attached standard products list
After 1000 hours application of DC working voltage (500 hours for each polarity) at +85 °C±2 °C,
when the capacitors are restored to 20 °C, the capacitors shall meet the following limits.
Endurance
Capacitance change ± 20% of initial measured value
tan d
<200 % of initial speciﬁed value
DC leakage current
<initial speciﬁed value
After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits speciﬁed in Endurance (With voltage treatment)
Shelf Life
■ Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
50, 60
120
1k
10 k to
0.70
1.00
1.30
1.70
■ Dimensions in mm (not to scale)
Sleeve
14 min.
L±1.0
0D±0.5
3 min.
F±0.5
fd±0.05
(Unit : mm)
Body Dia. 0D
4
5
6.3
Lead Dia. 0d
0.45
0.45
0.45
Lead space F
1.5
2.0
2.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-121 –
Aluminum Electrolytic Capacitors/ KA-(Bi-polar)
■ Standard Products (Bi-polar)
Endurance : 85 °C 1000 h (500hours for each polarity)
Case size
W.V.
Cap.
(±20 %)
Dia.
Lead Length
Lead
Dia.
Straight
(mm)
0.35
0.45
2.5
5.0
2.5
ECEA0GKN101( )
200
2000
0.24
0.45
2.0
5.0
2.5
ECEA0JKN220( )
200
2000
5.0
2.5
ECEA0JKN330( )
200
2000
5.0
2.5
ECEA0JKN470( )
200
2000
5.0
2.5
ECEA1AKN100( )
200
2000
6.3
7
61
22
5
7
29
33
5
7
38
0.24
0.45
2.0
47
6.3
7
46
0.24
0.45
2.5
10
4
7
25
0.20
0.45
1.5
35
50
Straight
Taping
Leads
(mm)
100
25
Part No.
(mm)
4
16
Taping Taping
✽B
✽i
(mm)
(μF)
10
Min. Packaging Q'ty
Lead Space
(V)
6.3
(mm)
Speciﬁcation
Ripple tan d
Current
Length
(120 Hz) (120 Hz)
(+85 °C) (+20 °C)
(mm) (mA r.m.s.)
(pcs)
(pcs)
22
5
7
35
0.20
0.45
2.0
5.0
2.5
ECEA1AKN220( )
200
2000
33
6.3
7
43
0.20
0.45
2.5
5.0
2.5
ECEA1AKN330( )
200
2000
47
6.3
7
65
0.20
0.45
2.5
5.0
2.5
ECEA1AKN470( )
200
2000
4.7
4
7
20
0.16
0.45
1.5
5.0
2.5
ECEA1CKN4R7( )
200
2000
10
5
7
25
0.16
0.45
2.0
5.0
2.5
ECEA1CKN100( )
200
2000
22
6.3
7
39
0.16
0.45
2.5
5.0
2.5
ECEA1CKN220( )
200
2000
33
6.3
7
60
0.16
0.45
2.5
5.0
2.5
ECEA1CKN330( )
200
2000
3.3
4
7
16
0.16
0.45
1.5
5.0
2.5
ECEA1EKN3R3( )
200
2000
4.7
5
7
21
0.16
0.45
2.0
5.0
2.5
ECEA1EKN4R7( )
200
2000
10
6.3
7
28
0.16
0.45
2.5
5.0
2.5
ECEA1EKN100( )
200
2000
22
6.3
7
55
0.16
0.45
2.5
5.0
2.5
ECEA1EKN220( )
200
2000
2.2
4
7
12
0.14
0.45
1.5
5.0
2.5
ECEA1VKN2R2( )
200
2000
3.3
5
7
16
0.14
0.45
2.0
5.0
2.5
ECEA1VKN3R3( )
200
2000
4.7
5
7
22
0.14
0.45
2.0
5.0
2.5
ECEA1VKN4R7( )
200
2000
10
6.3
7
30
0.14
0.45
2.5
5.0
2.5
ECEA1VKN100( )
200
2000
2.2
5
7
16
0.12
0.45
2.0
5.0
2.5
ECEA1HKN2R2( )
200
2000
3.3
5
7
16
0.12
0.45
2.0
5.0
2.5
ECEA1HKN3R3( )
200
2000
4.7
6.3
7
23
0.12
0.45
2.5
5.0
2.5
ECEA1HKN4R7( )
200
2000
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-122 –
Aluminum Electrolytic Capacitors/ KS
Low Proﬁle
Radial Lead Type
Series:
KS
Type:
KS
A
5 mm height
↑
KA
7 mm height
↑
■ Features
● Endurance : 85° C 1000 h
● 5 mm height
● RoHS directive compliant
M
■ Specifications
Category Temp. Range
–40 °C to +85 °C
Rated W.V. Range
4 V.DC to 50 V.DC
Nominal Cap. Range
2.2 μF to 330 μF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
DC Leakage Current
tan d
Please see the attached standard products list
After applying rated working voltage for 1000 hours at +85 °C±2 °C, when the capacitors are
restored to 20°C capacitors, shall meet the following limits.
Endurance
Shelf Life
Capacitance change ± 20% of initial measured value (4 V : ±30 %)
tan d
< 200 % of initial speciﬁed value
DC leakage current
< initial speciﬁed value
After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits speciﬁed in Endurance (With voltage treatment)
■ Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
50, 60
120
1k
10 k to
0.70
1.00
1.30
1.70
■ Dimensions in mm (not to scale)
Sleeve
fd±0.05
(Unit : mm)
+
L±1.0
14 min.
3 min.
0D±0.5
F±0.5
–
Body Dia. 0D
4
5
6.3
8
Lead Dia. 0d
0.45
0.45
0.45
0.45
Lead space F
1.5
2.0
2.5
2.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-123 –
Aluminum Electrolytic Capacitors/ KS
■ Standard Products
Endurance : 85 °C 1000 h
Case size
W.V.
(V)
4
6.3
Cap.
(±20 %)
(μF)
(mm)
(mm)
(mm)
1.5
5.0
2.5
0.35
0.45
Part No.
Straight
Taping
Leads
(pcs)
(pcs)
ECEA0GKS330( )
200
2000
47
4
5
34
0.35
0.45
1.5
5.0
2.5
ECEA0GKS470( )
200
2000
100
5
5
61
0.35
0.45
2.0
5.0
2.5
ECEA0GKS101( )
200
2000
220
6.3
5
82
0.35
0.45
2.5
5.0
2.5
ECEA0GKS221( )
200
2000
22
4
5
29
0.24
0.45
1.5
5.0
2.5
ECEA0JKS220( )
200
2000
33
5
5
38
0.24
0.45
2.0
5.0
2.5
ECEA0JKS330( )
200
2000
47
5
5
46
0.24
0.45
2.0
5.0
2.5
ECEA0JKS470( )
200
2000
5.0
2.5
ECEA0JKS101( )
200
2000
2.5
ECEA0JKS331( )
200
1000
100
6.3
5
71
0.24
0.45
2.5
8
5
130
0.24
0.45
2.5
8
5
130
0.24
0.45
22
5
5
35
0.20
0.45
2.0
5.0
2.5
ECEA1AKS220( )
200
2000
33
5
5
43
0.20
0.45
2.0
5.0
2.5
ECEA1AKS330( )
200
2000
47
6.3
5
65
0.20
0.45
2.5
5.0
2.5
ECEA1AKS470( )
200
2000
100
6.3
5
80
0.20
0.45
2.5
5.0
2.5
ECEA1AKS101( )
200
2000
2.5
ECEA1AKS221( )
200
8
5
120
0.20
0.45
8
5
120
0.20
0.45
5.0
ECEA0JKS331Q
2.5
5.0
1000
ECEA1AKS221Q
1000
1000
10
4
5
28
0.16
0.45
1.5
5.0
2.5
ECEA1CKS100( )
200
2000
22
5
5
39
0.16
0.45
2.0
5.0
2.5
ECEA1CKS220( )
200
2000
33
6.3
5
60
0.16
0.45
2.5
5.0
2.5
ECEA1CKS330( )
200
2000
47
6.3
5
70
0.16
0.45
2.5
5.0
2.5
ECEA1CKS470( )
200
2000
2.5
ECEA1CKS101( )
200
8
5
91
0.16
0.45
8
5
91
0.16
0.45
4.7
4
5
22
0.14
0.45
1.5
5.0
2.5
ECEA1EKS4R7( )
200
2000
10
5
5
28
0.14
0.45
2.0
5.0
2.5
ECEA1EKS100( )
200
2000
22
6.3
5
55
0.14
0.45
2.5
5.0
2.5
ECEA1EKS220( )
200
2000
33
6.3
5
65
0.14
0.45
2.5
5.0
2.5
ECEA1EKS330( )
200
2000
8
5
85
0.14
0.45
2.5
2.5
ECEA1EKS101( )
200
1000
8
5
85
0.14
0.45
4
5
16
0.12
0.45
200
2000
3.3
2.5
5.0
ECEA1CKS101Q
5.0
1.5
5.0
ECEA1EKS101Q
2.5
ECEA1VKS3R3( )
1000
1000
1000
4.7
4
5
22
0.12
0.45
1.5
5.0
2.5
ECEA1VKS4R7( )
200
2000
10
5
5
30
0.12
0.45
2.0
5.0
2.5
ECEA1VKS100( )
200
2000
22
6.3
5
60
0.12
0.45
2.5
5.0
2.5
ECEA1VKS220( )
200
2000
8
5
65
0.12
0.45
2.5
2.5
ECEA1VKS330( )
200
1000
33
8
5
65
0.12
0.45
8
5
85
0.12
0.45
8
5
85
0.12
0.45
2.2
4
5
16
0.10
0.45
1.5
5.0
2.5
ECEA1HKS2R2( )
200
2000
3.3
4
5
16
0.10
0.45
1.5
5.0
2.5
ECEA1HKS3R3( )
200
2000
47
50
Taping Taping
✽B
✽i
(mm)
26
100
35
Min. Packaging Q'ty
Lead Space
Straight
5
100
25
Lead
Dia.
4
220
16
(mm)
Lead Length
33
330
10
Dia.
Speciﬁcation
Ripple tan d
Current
Length
(120 Hz) (120 Hz)
(+85 °C) (+20 °C)
(mm) (mA r.m.s.)
5.0
2.5
ECEA1VKS330Q
2.5
5.0
ECEA1VKS470( )
1000
200
ECEA1VKS470Q
1000
1000
4.7
5
5
23
0.10
0.45
2.0
5.0
2.5
ECEA1HKS4R7( )
200
2000
10
6.3
5
35
0.10
0.45
2.5
5.0
2.5
ECEA1HKS100( )
200
2000
2.5
ECEA1HKS220( )
200
22
8
5
60
0.10
0.45
8
5
60
0.10
0.45
2.5
5.0
ECEA1HKS220Q
1000
1000
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-124 –
Aluminum Electrolytic Capacitors/ KS-(Bi-polar)
Radial Lead Type
Series:
KS(Bi-polar)
Type:
A
■ Features
● Endurance : 85° C 1000 h
● 5 mm height
● RoHS directive compliant
■ Specifications
Category Temp. Range
–40 °C to +85 °C
Rated W.V. Range
63 V.DC to 50 V.DC
Nominal Cap. Range
2.2 μF to 47 μF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
I < 0.05 CV or 10 (μA) After 2 minutes (Whichever is greater)
DC Leakage Current
tan d
Please see the attached standard products list
After 1000 hours application of DC working voltage (500 hours for each polarity) at +85 °C±2 °C,
when the capacitors are restored to 20 °C, the capacitors shall meet the following limits.
Endurance
Capacitance change
± 20% of initial measured value
tan d
<200 % of initial speciﬁed value
DC leakage current
<initial speciﬁed value
After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits speciﬁed in Endurance (With voltage treatment)
Shelf Life
■ Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
50, 60
120
1k
10 k to
0.70
1.00
1.30
1.70
■ Dimensions in mm (not to scale)
Sleeve
L±1.0
14 min.
0D±0.5
3 min.
F±0.5
fd±0.05
(Unit : mm)
Body Dia. 0D
4
5
6.3
Lead Dia. 0d
0.45
0.45
0.45
Lead space F
1.5
2.0
2.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-125 –
Aluminum Electrolytic Capacitors/ KS-(Bi-polar)
■ Standard Products (Bi-polar)
Endurance : 85 °C 1000 h (500hours for each polarity)
Case size
W.V.
(V)
6.3
10
16
25
Cap.
(±20 %)
(μF)
Dia.
(mm)
Speciﬁcation
Ripple tan d
Current
Length
(120 Hz) (120 Hz)
(+85 °C) (+20 °C)
(mm) (mA r.m.s.)
29
0.24
Lead Length
Lead
Dia.
Min. Packaging Q'ty
Lead Space
Straight
Taping Taping
✽B
✽i
(mm)
(mm)
(mm)
(mm)
0.45
2.0
5.0
2.5
Part No.
Straight
Taping
Leads
(pcs)
(pcs)
ECEA0JSN220( )
200
2000
22
5
5
33
6.3
5
38
0.24
0.45
2.5
5.0
2.5
ECEA0JSN330( )
200
2000
47
6.3
5
46
0.24
0.45
2.5
5.0
2.5
ECEA0JSN470( )
200
2000
10
4
5
25
0.20
0.45
1.5
5.0
2.5
ECEA1ASN100( )
200
2000
22
6.3
5
35
0.20
0.45
2.5
5.0
2.5
ECEA1ASN220( )
200
2000
33
6.3
5
43
0.20
0.45
2.5
5.0
2.5
ECEA1ASN330( )
200
2000
4.7
4
5
20
0.20
0.45
1.5
5.0
2.5
ECEA1CSN4R7( )
200
2000
10
5
5
25
0.20
0.45
2.0
5.0
2.5
ECEA1CSN100( )
200
2000
22
6.3
5
39
0.20
0.45
2.5
5.0
2.5
ECEA1CSN220( )
200
2000
3.3
5
5
18
0.20
0.45
2.0
5.0
2.5
ECEA1ESN3R3( )
200
2000
4.7
5
5
21
0.20
0.45
2.0
5.0
2.5
ECEA1ESN4R7( )
200
2000
10
6.3
5
28
0.20
0.45
2.5
5.0
2.5
ECEA1ESN100( )
200
2000
35
2.2
4
5
12
0.20
0.45
1.5
5.0
2.5
ECEA1VSN2R2( )
200
2000
50
2.2
5
5
16
0.20
0.45
2.0
5.0
2.5
ECEA1HSN2R2( )
200
2000
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2015
– EEE-126 –
Radial Lead Type Aluminum Electrolytic Capacitors
Notice matter
■ Law and regulation which are applied
● This product complies with the RoHS Directive (Restriction of the use of certain Hazardous Substances in electrical
and electronic equipment (DIRECTIVE 2011/65/EU)).
● No Ozone Depleting Chemicals (ODC's), controlled under the Montreal Protocol Agreement, are used in producing
this product.
● We do not PBBs or PBDEs as brominated ﬂame retardants.
● Export procedure which followed export related regulations, such as foreign exchange and a foreign trade method,
on the occasion of export of this product Thank you for your consideration.
■ Usage limitation
● This capacitor is designed to be used for electronics circuits such as audio/visual equipment, home appliances,
computers and other ofﬁce equipment, optical equipment, measuring equipment.
● When using for purposes which requires high reliability and safety, in cases such as when incorrect operation of this
product may do harm to human life or property, delivery speciﬁcations suitable for such uses must be exchanged
separately.
Items to be observed
● This speciﬁcation guarantees the quality and performance of the product as individual components.
Before use, check and evaluate their compatibility with installed in your products.
● Do not use the products beyond the speciﬁcations described in this document.
● Install the following systems for a failsafe design to ensure safety if these products are to be used in
equipment where a defect in these products may cause the loss of human life or other signiﬁcation damage,
such as damage to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace
equipment, electric heating appliances, combustion/ gas equipment, rotating equipment, and disaster/
crime prevention equipment.
1) The system is equipped with a protection circuit and protection device.
2) The system is equipped with a redundant circuit or other system to prevent an unsafe status in the event
of a single fault.
● Before using the products, carefully check the effects on their quality and performance, and determined
whether or not they can be used. These products are designed and manufactured for general-purpose and
standard use in general electronic equipment.
These products are not intended for use in the following special conditions.
1) In liquid, such as Water, Oil, Chemicals, or Organic solvent
2) In direct sunlight, outdoors, or in dust
3) In vapor, such as dew condensation water of resistive element, or water leakage, salty air, or air with a
high concentration corrosive gas, such as Cl2, H2S, NH3, SO2, or NOx.
4) In an environment where strong static electricity or electromagnetic waves exist.
5) Mounting or placing heat-generating components or inflammables, such as vinyl-coated wires, near
these products.
6) Sealing or coating of these products or a printed circuit board on which these products are mounted,
with resin and other material.
7) Using resolvent, water or water-soluble cleaner for ﬂux cleaning agent after soldering.
(In particular, when using water or a water-soluble cleaning agent, be careful not to leave water residues)
● Please arrange circuit design for preventing impulse or transitional voltage. Do not apply voltage, which
exceeds the full rated voltage when the capacitors receive impulse voltage, instantaneous high voltage,
high pulse voltage etc.
● Electrolyte is used in the products. Therefore, misuse can result in rapid deterioration of characteristics
and functions of each product. Electrolyte leakage damages printed circuit and affects performance,
characteristics, and functions of customer system.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Mar. 2015
Radial Lead Type Aluminum Electrolytic Capacitors
Application Guidelines
1. Circuit Design
1.1 Operating Temperature and Frequency
Electrical parameters for electrolytic capacitors are normally speciﬁed at 20 °C temperature and 120 Hz frequency.
These parameters vary with changes in temperature and frequency. Circuit designers should take these changes into
consideration.
1) Effects of operating temperature on electrical parameters
(a) At higher temperatures, leakage current and capacitance increase while equivalent series resistance (ESR) decreases.
(b) At lower temperatures, leakage current and capacitance decrease while equivalent series resistance (ESR) increases.
2) Effects of frequency on electrical parameters
(a) At higher frequencies, capacitance and impedance decrease while tan d increases.
(b) At lower frequencies, heat generated by ripple current will rise due to an increase in equivalent series resistance
(ESR).
1.2 Operating Temperature and Life Expectancy
1) Expected life is affected by operating temperature. Generally, each 10 °C reduction in temperature will double the
expected life.
Use capacitors at the lowest possible temperature below the upper category temperature.
2) If operating temperatures exceed the upper category limit, rapid deterioration of electrical parameter will occur and
irreversible damage will result.
Check for the maximum capacitor operating temperatures including ambient temperature, internal capacitor
temperature rise due to ripple current, and the effects of radiated heat from power transistors, IC's or resistors.
Avoid placing components, which could conduct heat to the capacitor from the back side of the circuit board.
3) The formula for calculating expected life at lower operating temperatures is as follows;
L2 = L1×2
T1–T2
10
L1 : Guaranteed life (h) at temperature, T1 °C
L2 : Expected life (h) at temperature, T2 °C
T1 : Upper category temperature + temperature rise due to rated ripple current (°C)
T2 : Actual operating temperature, ambient temperature + temperature rise due to ripple current (°C)
4) Please use according to the lifetime as noted in this speciﬁcation. Using products beyond end of the lifetime may
change characteristics rapidly, short-circuit, operate pressure relief vent, or leak electrolyte.
1.3 Common Application Conditions to Avoid
The following misapplication load conditions will cause rapid deterioration of a capacitor’s electrical parameters.
In addition, rapid heating and gas generation within the capacitor can occur, causing the pressure relief vent to operate
and resultant leakage of electrolyte. Under extreme conditions, explosion and ﬁre ignition could result.
The leaked electrolyte is combustible and electrically conductive.
1) Reverse Voltage
DC capacitors have polarity. Verify correct polarity before insertion. For circuits with changing or uncertain polarity,
use DC bipolar capacitors. DC bipolar capacitors are not suitable for use in AC circuits.
2) Charge / Discharge Applications
Standard capacitors are not suitable for use in repeating charge/discharge applications. For charge/ discharge
applications, consult us with your actual application condition.
For rush current, please to not exceed 100 A.
3) ON-OFF circuit
Do not use capacitors in circuit where ON-OFF switching is repeated more than 10000 times/per day.
In case of applying to the theses ON-OFF circuit, consult with us about circuit condition and so on.
4) Over voltage
Do not apply voltages exceeding the maximum speciﬁed rated voltage. Voltages up to the surge voltage rating are
acceptable for short periods of time.
Ensure that the sum of the DC voltage and the superimposed AC ripple voltage does not exceed the rated voltage.
5) Ripple Current
Do not apply ripple currents exceeding the maximum speciﬁed value. For high ripple current applications, use a
capacitor designed for high ripple currents. In addition, consult us if the applied ripple current is to be higher than
the maximum speciﬁed value.
Ensure that rated ripple currents that superimposed on low DC bias voltages do not cause reverse voltage
conditions.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Mar. 2015
Radial Lead Type Aluminum Electrolytic Capacitors
1.4 Using Two or More Capacitors in Series or Parallel
1) Capacitors Connected in Parallel
The circuit resistance can closely approximate the series resistance of the capacitor, causing an imbalance of ripple
current loads within the capacitors. Careful wiring methods can minimize the possible application of an excessive
ripple current to a capacitor.
2) Capacitors Connected in Series
Differences in normal DC leakage current among capacitors can cause voltage imbalances.
The use of voltage divider shunt resistors with consideration to leakage currents can prevent capacitor voltage imbalances.
1.5 Capacitor Mounting Considerations
1) Double-Sided Circuit Boards
Avoid wiring pattern runs, which pass between the mounted capacitor and the circuit board. When dipping into a
solder bath, an excess solder may deposit under the capacitor by capillary action, causing short circuit between
anode and cathode terminals.
2) Circuit Board Hole Positioning
The vinyl sleeve of the capacitor can be damaged if solder passes through a lead hole into the subsequently
processed parts.
Special care when locating hole positions in proximity to capacitors is recommended.
3) Circuit Board Hole Spacing
The spacing of circuit board holes should match the lead wire spacing of capacitors within the speciﬁed tolerances.
Incorrect spacing can cause an excessive lead wire stress during the insertion process.
This may result in premature capacitor failure due to the short or open circuit, increased leakage current, or
electrolyte leakage.
4) Clearance for Case Mounted Pressure Relief
Capacitors with case mounted pressure relief require sufﬁcient clearance to allow for proper pressure relief operation.
The minimum clearance are dependent on capacitor diameters as follows.
(Dia 6.3 mm to Dia 16 mm : 2 mm minimum, Dia 18 mm : 3 mm minimum)
5) Wiring Near the Pressure Relief
Avoid locating high voltage or high current wiring or circuit board paths above the pressure relief. Flammable, high
temperature gas that exceeds 100 °C may be released which could dissolve the wire insulation and ignite.
6) Circuit Board Patterns Under the Capacitor
Avoid circuit board runs under the capacitor, as an electrical short can occur due to an electrolyte leakage.
7) Please note the resonant after product implementation
The vicinity of the resonant point will take a heavy load on the capacitor.
Capacitors can cause rapid change in characteristics and dropout by this load.
1.6 Electrical Isolation of the Capacitor
Completely isolate the capacitor as follows.
Between the cathode and the case and between the anode terminal and other circuit paths.
1.7 Capacitor Sleeve
The vinyl sleeve or laminate coating is intended for marking and identiﬁcation purposes and is not meant to electrically
insulate the capacitor.
The sleeve may split or crack if immersed into solvents such as toluene or xylene and then subsequently exposed to
high temperatures.
2. Capacitor Handling Techniques
2.1 Considerations Before Using
1) Capacitors have a ﬁnite life. Do not reuse or recycle capacitors from used equipment.
2) Transient recovery voltage may be generated in the capacitor due to dielectric absorption.
If required, this voltage can be discharged with a resistor with a value of about 1 kΩ.
3) Capacitors stored for a long period of time may exhibit an increase in leakage current.
This can be corrected by gradually applying rated voltage in series with a resistor of approximately 1 kΩ.
4) If capacitors are dropped, they can be damaged mechanically or electrically. Avoid using dropped capacitors.
5) Dented or crushed capacitors should not be used. The seal integrity can be damaged and loss of electrolyte/
shortened life can result.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Mar. 2015
Radial Lead Type Aluminum Electrolytic Capacitors
2.2 Capacitor Insertion
1) Verify the correct capacitance and rated voltage of the capacitor.
2) Verify the correct polarity of the capacitor before insertion.
3) Verify the correct hole spacing and land pattern size before insertion to avoid stress on the terminals.
4) Ensure that the lead clinching operation done by auto insertion equipments does not stress the capacitor leads
where they enter the seal of the capacitor.
2.3 Flow Soldering
1) Do not immerse the capacitor body into the solder bath as excessive internal pressure could result.
2) Apply proper soldering conditions (temperature, time, etc.). Do not exceed the speciﬁed limits.
3) Do not allow other parts or components to touch the capacitor during soldering.
2.4 Manual Soldering
1) Apply soldering conditions (temperature and time) based on the speciﬁcation, or do not exceed temperature of 350 °C
for 3 seconds or less.
2) If lead wires must be modiﬁed to meet terminal board hole spacing, avoid stress on the lead wire where it enters the
capacitor seal.
3) If a soldered capacitor must be removed and reinserted, avoid excessive stress on the capacitor leads.
4) Avoid physical contacts between the tip of the soldering iron and capacitors to prevent melting of the vinyl sleeve.
2.5 Other Soldering Considerations
Rapid temperature rise during the preheat operation and resin bonding operation can cause cracking of the capacitor’s
vinyl sleeve.
For heat curing, do not exceed 150 °C for the maximum time of 2 minutes.
2.6 Capacitor Handling after Soldering
1) Avoid moving the capacitor after soldering to prevent excessive stress on the lead wires where they enter the seal.
2) Do not use the capacitor as a handle when moving the circuit board assembly.
3) Avoid striking the capacitor after assembly to prevent failure due to excessive shock.
2.7 Circuit Board Cleaning
1) Circuit boards can be immersed or ultrasonically cleaned using suitable cleaning solvents for up to 5 minutes and up
to 60 °C maximum temperatures. The boards should be thoroughly rinsed and dried.
The use of ozone depleting cleaning agents is not recommended for the purpose of protecting our environment.
2) Avoid using the following solvent groups unless speciﬁcally allowed in the speciﬁcation;
(a) Halogenated cleaning solvents: except for solvent resistant capacitor types, halogenated solvents can permeate
the seal and cause internal capacitor corrosion and failure.
For solvent resistant capacitors, carefully follow the temperature and time requirements based on the speciﬁcation.
1,1,1-trichloroethane should never be used on any aluminum electrolytic capacitor.
(b) Alkaline solvents
: could react and dissolve the aluminum case.
(c) Petroleum based solvents : deterioration of the rubber seal could result.
(d) Xylene
: deterioration of the rubber seal could result.
(e) Acetone
: removal of the ink markings on the vinyl sleeve could result.
3) A thorough drying after cleaning is required to remove residual cleaning solvents that may be trapped between the capacitor
and the circuit board. Avoid drying temperatures, which exceed the Upper category temperature of the capacitor.
4) Monitor the contamination levels of the cleaning solvents during use in terms of electrical conductivity, pH, speciﬁc gravity, or
water content. Chlorine levels can rise with contamination and adversely affect the performance of the capacitor.
5) Depending on the cleaning method, the marking on a capacitor may be erased or blurred.
Please consult us if you are not certain about acceptable cleaning solvents or cleaning methods.
2.8 Mounting Adhesives and Coating Agents
When using mounting adhesives or coating agents to control humidity, avoid using materials containing halogenated solvents.
Also, avoid the use of chloroprene based polymers.
Harden on dry adhesive or coating agents well lest the solvent should be left.
After applying adhesives or coatings, dry thoroughly to prevent residual solvents from being trapped between the capacitor
and the circuit board.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Mar. 2015
Radial Lead Type Aluminum Electrolytic Capacitors
2.9 Fumigation
In exporting electronic appliances with aluminum electrolytic capacitors, in some cases fumigation treatment using
such halogen compound as methyl bromide is conducted for wooden boxes.
If such boxes are not dried well, the halogen left in the box is dispersed while transported and enters in the capacitors inside.
This possibly causes electrical corrosion of the capacitors. Therefore, after performing fumigation and drying make
sure that no halogen is left.
Don’t perform fumigation treatment to the whole electronic appliances packed in a box.
3. Precautions for using capacitors
3.1 Environmental Conditions
Capacitors should not be used in the following environments.
1) Exposure to temperatures above the upper category or below the lower category temperature of the capacitor.
2) Direct contact with water, salt water, or oil.
3) High humidity conditions where water could condense on the capacitor.
4) Exposure to toxic gases such as hydrogen sulﬁde, sulfuric acid, nitric acid, chlorine, Chlorine compound, Bromine,
Bromine compound or ammonia.
5) Exposure to ozone, radiation, or ultraviolet rays.
6) Vibration and shock conditions exceeding speciﬁed requirements.
3.2 Electrical Precautions
1) Avoid touching the terminals of a capacitor as a possible electric shock could result. The exposed aluminum case is
not insulated and could also cause electric shock if touched.
2) Avoid short circuiting the area between the capacitor terminals with conductive materials including liquids such as
acids or alkaline solutions.
3) A low-molecular-weight-shiroxane which is included in a silicon material shall causes abnormal electrical
characteristics.
4. Emergency Procedures
1) If the pressure relief of the capacitor operates, immediately turn off the equipment and disconnect from the power source.
This will minimize an additional damage caused by the vaporizing electrolyte.
2) Avoid contact with the escaping electrolyte gas, which can exceed 100 °C temperatures.
If electrolyte or gas enters the eye, immediately ﬂush the eye with large amounts of water.
If electrolyte or gas is ingested by mouth, gargle with water.
If electrolyte contacts the skin, wash with soap and water.
5. Long Term Storage
Leakage current of a capacitor increases with long storage times. The aluminum oxide ﬁlm deteriorates as a function of
temperature and time.
If used without reconditioning, an abnormally high current will be required to restore the oxide ﬁlm.
This surge current could cause the circuit or the capacitor to fail.
Storage period is one year. When storage period is over 12 months, a capacitor should be reconditioned by applying
the rated voltage in series with a 1000 Ω current limiting resistor for a time period of 30 minutes.
For storage condition, keep room temperature (5 °C to 35 °C) and humidity (45 % to 85 %) where direct sunshine
doesn't reach.
5.1 Environmental Conditions
1) Exposure to temperatures above the upper category or below the lower category temperature of the capacitor.
2) Direct contact with water, salt water, or oil.
3) High humidity conditions where water could condense on the capacitor.
4) Exposure to toxic gases such as hydrogen sulﬁde, sulfuric acid, nitric acid, chlorine, Chlorine compound, Bromine,
Bromine compound or ammonia.
5) Exposure to ozone, radiation, or ultraviolet rays.
6) Vibration and shock conditions exceeding speciﬁed requirements.
6. Capacitor Disposal
When disposing capacitors, use one of the following methods.
1) Incinerate after crushing the capacitor or puncturing the can wall (to prevent explosion due to internal pressure rise).
2) Dispose as solid waste.
NOTE: Local laws may have speciﬁc disposal requirements which must be followed.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Mar. 2015
Aluminum Electrolytic Capacitors
■ Lead Taping Radial Lead Type
● Dimensions in mm (not to scale)
Lead space
(F) 2.5 mm 5.0 mm 7.5 mm
Case size
× 5L
B
A
04
× 5L
B
A
05
C
A
06.3 × 5L
× 5L
C
E
08
× 7L
B
A
04
× 7L
B
A
05
C
A
06.3 × 7L
× 7L
C
E
08
× 11L
C
D
05
C
D
06.3 × 11.2L, 15L
× 11.5L, 15L, 20L
E
08
F
010 × 12.5L, 16L, 20L, 25L
G
012.5 × 15L, 20L, 25L
H
016 × 15L, 20L, 25L
H
018 × 15L, 20L, 25L
■ Figure A (Lead space: 5.0 mm / 0D×L : 04×5, 7, 05×5, 7, 06.3×5, 7)
12.7±1.0
fD
1.0
1.0
16.0±0.5
9.0±0.5
F
Nominal
Tolerance
0d
0.45
±0.05
F
5.0
+0.8
–0.2
P1
3.85
±0.50
17.50+0.75
–0.20
fd
P1
(Unit : mm)
Dimensions
0.6±0.3
6.0 0 to 1.5
18.0±0.5
L
6.35±1.0
f4.0±0.2
12.7±0.2
■ Figure B (Lead space: 2.5 mm / 0D×L : 04×5, 7, 05×5, 7)
12.7±1.0
6.35±1.0
1.0
fD
1.0
9.0±0.5
F
Nominal
04.0±0.2
Tolerance
0d
0.45
±0.05
F
2.5
±0.5
P1
5.1
±0.5
0.6±0.3
0d
P1
Dimensions
18.50+0.75
–0.50
6.0 0 to 1.5
18.0±0.5
L
(Unit : mm)
12.7±0.2
■ Figure C (Lead space: 2.5 mm / 0D×L : 05×11, 06.3×5, 7, 11.2, 15, 08×5, 7)
12.7±1.0
1.0
fD
1.0
f4.0±0.2
Dimensions
Nominal
(Unit : mm)
Tolerance
0d
0.45(5×11, 6.3×11.2, 15 : 0.50)
±0.05
F
2.5
±0.5
P1
5.1
±0.5
0.6±0.3
9.0±0.5
P1 F
18.50+0.75
–0.50
fd
6.0
18.0±0.5
0 to 1.5
L
6.35±1.0
12.7±0.2
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
05 Mar. 2014
Aluminum Electrolytic Capacitors
■ Figure D (Lead space: 5 mm / 0D×L : 05×11, 06.3×11.2, 15)
12.7±1.0
fD
1.0
1.0
Nominal
0d
0.50
F
5.0
P1
3.85
Tolerance
±0.05
+0.8
–0.2
±0.50
0.6±0.3
9.0±0.5
F
16.0±0.5
fd
P1
(Unit : mm)
Dimensions
18.50+0.75
–0.50
6.0 0 to 1.5
18.0±0.5
L
6.35±1.0
f4.0±0.2
12.7±0.2
■ Figure E (Lead space: 5 mm / 0D×L : 08×5, 7, 11.5, 15, 20)
12.7±1.0
fD
1.0
6.0 0 to 1.5
Dimensions
0.6±0.3
F
H
P1
16.0±0.5
fd
9.0±0.5
18.0±0.5
(Unit : mm)
1.0
L
6.35±1.0
f4.0±0.2
12.7±0.2
Nominal
08×11.5 to 20
08×5, 7
Sufﬁx code
B
BQ
0d
0.60
0.45
F
5.0
P1
3.85
H
20.00
Tolerance
±0.05
+0.8
–0.2
±0.50
18.50
+0.75
–0.50
■ Figure F (Lead space: 5 mm / 0D×L : 010×12.5, 16, 20, 25)
12.7±1.0
1.0
fD
1.0
(Unit : mm)
f4.0±0.2
Dimensions
Nominal
Tolerance
0d
0.60
±0.05
F
5.0
+0.8
–0.2
P1
3.85
±0.50
0.6±0.3
9.0±0.5
P1 F
18.50+0.75
–0.50
fd
6.0
18.0±0.5
0 to 1.5
L
6.35±1.0
12.7±0.2
■ Figure G (Lead space: 5 mm / 0D×L : 012.5×15, 20, 25)
15.0±1.0
1.0
fD
1.0
f4.0±0.2
(Unit : mm)
Dimensions
Nominal
0d
0.60
Tolerance
±0.05
F
5.0
+0.8
–0.2
P1
5.0
±0.5
0.6±0.3
9.0±0.5
18.50+0.75
–0.50
fd
P1 F
6.0
18.0±0.5
0 to 1.5
L
7.5±1.0
15.0±0.2
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
05 Mar. 2014
Aluminum Electrolytic Capacitors
■ Figure H (Lead space: 7.5 mm / 0D×L : 016×15, 20, 25, 018×15, 20, 25)
1.3
7.5±1.0
1.3
30.0±1.0
fD
2.0
(Unit : mm)
2.0
Nominal
Tolerance
0d
0.80
±0.05
F
7.5
±0.5
P1
3.75
±0.50
0.6±0.3
15.0±0.2
18.50+0.75
–0.50
fd
F
9.0±0.5
P1
6.0
18.0±0.5
0 to 1.5
L
Dimensions
f4.0±0.2
■ Packaging Specifications
Dimensions of Outer Carton Box
b
c
Dimensions (mm)
a
(Unit : mm)
04 to 05
06.3
08
010, 012.5
016, 018
a
340 max.
340 max.
340 max.
340 max.
340 max.
b
to 55 max.
to 55 max.
to 55 max.
55 to 66 max.
62 to 75 max.
c
170 to 210 max.
270 max.
230 max.
170 to 270 max.
225 to 310 max.
2000 pcs.
2000 pcs.
1000 pcs.
500 pcs.
250 pcs.
Packaging Quantity
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
05 Mar. 2014
Aluminum Electrolytic Capacitors
Lead Forming Type (Snap-in)
Lead formed Aluminium Electrolytic Capacitor for self mounting, for rationalization and upgrade of soldering process.
H3
H2
P
=
H1
0d
E
F
04, 05, 06.3, 08
H1
H2
P
=
0d
E
F
010, 012.5, 016, 018
✽ Direction of bending shape is not speciﬁed
■ Dimensions in mm (not to scale)
Dia 0D
(Unit : mm)
for PWB
H1±0.5
H2
H3
F±0.5
P
E max.
0d
5
4.5
2.7
2.5
5.0
1.0
1.0
6.3
4.5
2.7
2.5
5.0
1.0
8
4.5
2.7
2.5
5.0
1.0
10
4.5
2.7
5.0
1.0
1.0
0.6
1.0
1.6
12.5
4.5
2.7
5.0
1.0/0.9
1.0
0.6/0.8
1.0 /1.1
1.6
16
4.5
2.7
7.5
0.9
1.0
0.8
1.1
1.6
18
4.5
2.7
7.5
0.9
1.0
0.8
1.1
1.6
hole dia. 0
thickness
0.5
0.9
1.6
1.0
0.5
1.0
1.6
1.0
0.6
1.0
1.6
■ Series KA/KS Dimensions in mm (not to scale)
Dia 0D
(Unit : mm)
for PWB
H1±0.5
H2
H3±0.3
F±0.5
P
E max.
0d
hole dia. 0
thickness
4
4.5
2.7
1.5
5.0
0.95
1.0
0.45
0.9
1.6
5
4.5
2.7
1.5
5.0
0.95
1.0
0.45
0.9
1.6
6.3
4.5
2.7
1.5
5.0
0.95
1.0
0.45
0.9
1.6
8
4.5
2.7
1.5
5.0
0.95
1.0
0.45
0.9
1.6
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
05 Mar. 2014
Discontinued Series (not recommended for new design)
Aluminum Electrolytic Capacitors (Radial Lead Type)
Discontinued Product
Series
Part No.
Endurance
Features
S SW
S(High voltage) ECEA--S-----
+ 85 °C 1000 h Standard
S Bi-polar
SU
K
KS(03)
KG
SS
Z
HF
HFS
HFE
HFG
HFQ
HFZ
KF
ESM
FA
FB
NHE
MH
NH
NE
NX
3H
MG
TH
MT
MS
GA
EA
+ 85 °C 2000 h
+ 85 °C 2000 h
+ 85 °C 1000 h
+ 85 °C 1000 h
+105 °C 1000 h
+ 85 °C 2000 h
+ 85 °C 2000 h
+105 °C 2000 h
+105 °C 1000 to 2000 h
+105 °C 2000 h
+105 °C 2000 to 5000 h
+105 °C 1000 to 2000 h
+105 °C 5000 h
+105 °C 1000 h
+ 85 °C 2000 h
+105 °C 2000 to 5000 h
+105 °C 1000 to 2000 h
+105 °C 2000 h
+105 °C 1000 h
+105 °C 2000 h
+105 °C 5000 to 7000 h
+105 °C 5000 h
+125 °C 1000 h
+ 85 °C 2000 h
+105 °C 1000 h
+ 85 °C 1000 h
+ 85 °C 2000 h
+105 °C 2000 h
+105 °C 5000 h
ECEA--N----S
ECEA--U----ECEA--K----ECEA--KK---ECEA--KG----ECEA--SS--ECEA--Z---ECEA--F---ECEA--FS--ECEA--FE--ECA--FG---ECA--FQ---ECA--FZ---ECA--KF---ECEA--E---M
EEUFA-----EEUFB-----ECEA--GE--ECA--MH--ECEA--G---S
ECA--TE--ECEA--NX--ECEA--T---EEUMG---ECEA--V---T
ECEA--M---T
ECEA--M--EEUGA----EEUEA-----
Horizontal
defection
ECEA--W---current
correction
Bi-polar Standard
Standard
Height 7 mm
Height 5 mm 03×5
Height 7 mm
Low profile
Low impedance
Low impedance
Low impedance
Low impedance
Low impedance
Low impedance
Low impedance
Height 7 mm, Low impedance
Low impedance
Low impedance
Low impedance
Longlife
Longlife
Longlife
Longlife
Longlife
High reliability
High ripple
Fixed time-interval circuit
Time constant circuit
Low LC
+105°C Standard
Longlife
Replacement
Rated.W.V.
(V)
10 to 50
Capacitance
(μF)
1
to
100
4 to 100
6.3 to 450
6.3 to 50
4 to 50
6.3 to 50
6.3 to 50
6.3 to 50
10 to 63
6.3 to 63
6.3 to 100
6.3 to 63
6.3 to 63
6.3 to 35
6.3 to 35
10 to 50
6.3 to 63
10 to 50
6.3 to 450
6.3 to 100
6.3 to 100
10 to 63
6.3 to 50
10 to 63
160 to 450
10, 16, 25, 50
6.3 to 50
10 to 50
6.3 to 50
160 to 450
0.1 to 1000
0.1 to 15000
0.1 to 100
0.1 to
22
0.1 to 220
3.3 to 4700
0.1 to 2200
22 to 2200
0.47 to 4700
3.3 to 15000
0.1 to 15000
6.8 to 15000
56 to 5600
1 to 120
0.1 to 220
68 to 15000
0.47 to 10000
0.1 to 15000
0.1 to 22000
0.47 to 4700
0.47 to 3300
0.047 to 2200
1 to 1000
2.2 to 470
1 to 2200
47 to 2200
0.1 to 100
0.1 to 15000
10 to 150
25
3.5 to 10
Series
Endurance
M
+ 85 °C 2000 h
SU-BP
M
KA
+ 85 °C 2000 h
+ 85 °C 2000 h
+ 85 °C 1000 h
Available upon request
GA
+105 °C 1000 h
Available upon request
FC
+105 °C
1000 to 5000 h
NHG
+105 °C
1000 to 2000 h
EB
+105 °C
5000 to 10000 h
TA
+125 °C 2000 h
Available upon request
NHG
M
NHG
EE
+105 °C 1000 to 2000 h
+85 °C 2000 h
+105 °C 1000 to 2000 h
+105 °C 8000 to 10000 h
Horizontal
+ 85 °C 2000 h defection current
Not available
correction for TV
Check Panasonic website for discontinued / revised product series specification.
http://panasonic.net/id/
03 Dec. 2013
MEMO
.
CAUTION AND WARNING
1. The electronic components contained in this catalog are designed and produced for use in home electric appliances, ofﬁce eq uipment, information equipment,
communications equipment, and other general purpose electronic devices.
Before use of any of these components for equipment that requires a high degree of safety, such as medical instruments, aeros pace equipment, disaster-prevention
equipment, security equipment, vehicles (automobile, train, vessel),
please be sure to contact our sales representative.
2. When applying one of these components for equipment requiring a high degree of safety, no matter what sort of application itmight be, be sure to install a protective
circuit or redundancy arrangement to enhance the safety of your equipment. In addition, please carry out the safety test on your own responsibility.
3. When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on thespeciﬁcations with us in advance.
4. Technical information contained in this catalog is intended to convey examples of typical performances and/or applications a nd is not intended to make any
warranty with respect to the intellectual property rights or any other related rights of our company or any third parties nor rgant any license under such rights.
5. In order to export products in this catalog, the exporter may be subject to the export license requirement under the Foreign Exchange and Foreign Trade Law of
Japan.
6. No ozone-depleting substances (ODSs) under the Montreal Protocol are used in the manufacturing processes of Automotive & Ind ustrial Systems Company, Panasonic
Corporation.
Please contact
Factory
Device Solutions Business Division
Automotive & Industrial Systems Company
Panasonic Corporation
1006 Kadoma, Kadoma City, Osaka 571-8506,
JAPAN
The information in this catalog is valid as of July 2015.

Open as PDF

Similar pages: Aluminum Electrolytic Capacitors (Radial Lead Type)[pdf :1.29 MB]; PANASONIC EEUED2C151S; PANASONIC EEU; PANASONIC EEUTA1E221; Aluminum Electrolytic Capacitors/ FM Radial Lead Type; PANASONIC EEUFR0J122L; PANASONIC EEUEB1E471; PANASONICBATTERY EEUED2E101; PANASONIC ECEA0JN222U; PANASONIC EEU; PANASONIC ECEA1EKK4R7I; PANASONIC EEUEE2E330; PANASONIC EEUEB1A471S; PANASONIC EEUMG2G100; ECEA1VKN100; PANASONIC ECEA0JKA221; PANASONIC ECE; PANASONIC ECEA1CSN4R7; PANASONIC EEUEB1J331; PANASONIC ECA1EEN100; PANASONIC ECA; PANASONIC ECA