PANASONIC EEUEB1E471

Aluminum Electrolytic Capacitors/ EB
Radial Lead Type
Series:
EB
Type:
A
■ Features
● Endurance : +105 °C 5000 h to 10000 h
● Hight ripple hight frequency (Hight Voltage)
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
–40 °C to +105 °C
10 V.DC to 63 V.DC
2.2 μF to 3300 μF
–25 °C to +105 °C
160 V.DC to 450 V.DC
10 μF to 330 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA)
After 2 minutes application of rated working voltage at +20 °C (Whichever is greater)
DC Leakage Current
tan d
Please see the attached standard products list
After following life test with DC voltage and +105 °C±2 °C ripple current value applied
(The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when
the capacitors are restord to 20 °C, the capacitors shall meet the limits specified below.
(10 to 63 V.DC)
Duration : 05×11 to 08×11.5 : 5000 hours 05×15 to 06.3×15 : 7000 hours
08×15 to 012.5×25 : 10000 hours
Capacitance change ±30 % of initial measured value
tan d
< 300 % of initial specified value
DC leakage current
< initial specified value
Endurance
(160 to 450 V.DC)
Duration : 5000 hours
Capacitance change ±20 % of initial measured value
tan d
< 200 % of initial specified value
DC leakage current
< initial specified value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Shelf Life
■ Frequency correction factor for ripple current
(10 ~ 63 V.DC)
Frequency (Hz)
Capacitance
(μF)
60
120
1k
10 k
100 k
120
1k
10
0.75
1.00
1.40
1.55
1.65
160 to 250
0.55
0.85
0.90
1.00
470
0.85
1.00
1.20
1.25
1.30
350 to 450
0.50
0.80
0.90
1.00
to 3300
0.95
1.00
1.05
1.10
1.15
0.47 to
22
1000
Frequency (Hz)
W. V.
(V. DC)
to
10 k to 30k 30 k to 100k
■ Dimensions in mm (not to scale)
(Unit : mm)
Sleeve
05 to08
0d±0.05
Pressure relief
06.3
010
+
L=
14 min.
0D±0.5
3 min.
F±0.5
–
0D±0.5
=L16 : L±1.0 (08L15 only L±1.5)
L20 : L±2.0
Body Dia. 0D
Lead Dia. 0d
Lead space F
5
0.5
2.0
6.3
0.5
2.5
8
0.6
3.5
10
0.6
5.0
12.5
0.6
5.0
16
0.8
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01
– EEE-87 –
18
0.8
7.5
Oct. 2013
Aluminum Electrolytic Capacitors/ EB
■ Standard Products
Endurance : 105 °C 05×11 to 08×11.5=5000 h, 05×15 to 06.3×15=7000 h, 08×15 to 012.5×25=10000 h
Case size
Specification
Lead Length
Ripple tan d Endur- Lead
Lead Space
Cap.
W.V.
ance Dia.
(±20 %) Dia. Length Current
Taping Taping
(120 Hz) (120 Hz)
Straight
✽B
✽H
(+105 °C) (+20 °C)
(V)
(μF) (mm) (mm) (mA r.m.s.)
(hours) (mm) (mm) (mm) (mm)
5
15
105
0.30
7000 0.5
2.0
5.0
2.5
100
5
11
66
0.30
5000 0.5
2.0
5.0
2.5
6.3
15
152
0.30
7000 0.5
2.5
5.0
2.5
220
6.3
11.2
100
0.30
5000 0.5
2.5
5.0
2.5
10
8
15
278
0.30 10000 0.6
3.5
5.0
470
8
11.5
180
0.30
5000 0.6
3.5
5.0
2200 12.5 20
540
0.32 10000 0.6
5.0
5.0
3300 12.5 25
802
0.34 10000 0.6
5.0
5.0
1000 10
20
430
0.25 10000 0.6
5.0
5.0
16
2200 12.5 25
706
0.27 10000 0.6
5.0
5.0
5
15
78
0.22
7000 0.5
2.0
5.0
2.5
47
5
11
55
0.22
5000 0.5
2.0
5.0
2.5
6.3
15
135
0.22
7000 0.5
2.5
5.0
2.5
100
6.3
11.2
95
0.22
5000 0.5
2.5
5.0
2.5
25
220
8
11.5
125
0.22
5000 0.6
3.5
5.0
330
8
15
255
0.22 10000 0.6
3.5
5.0
470
10
16
321
0.22 10000 0.6
5.0
5.0
1000 12.5 20
498
0.22 10000 0.6
5.0
5.0
5
15
66
0.18
7000 0.5
2.0
5.0
2.5
33
5
11
46
0.18
5000 0.5
2.0
5.0
2.5
220
8
15
197
0.18 10000 0.6
3.5
5.0
35
330 10
16
278
0.18 10000 0.6
5.0
5.0
470
10
20
349
0.18 10000 0.6
5.0
5.0
1000 12.5 25
586
0.18 10000 0.6
5.0
5.0
0.47
5
11
4
0.15
5000 0.5
2.0
5.0
2.5
1
5
11
8
0.15
5000 0.5
2.0
5.0
2.5
2.2
5
11
15
0.15
5000 0.5
2.0
5.0
2.5
3.3
5
11
18
0.15
5000 0.5
2.0
5.0
2.5
4.7
5
11
18
0.15
5000 0.5
2.0
5.0
2.5
10
5
11
27
0.15
5000 0.5
2.0
5.0
2.5
5
15
55
0.15
7000 0.5
2.0
5.0
2.5
50
22
5
11
39
0.15
5000 0.5
2.0
5.0
2.5
6.3
15
87
0.15
7000 0.5
2.5
5.0
2.5
47
6.3
11.2
61
0.15
5000 0.5
2.5
5.0
2.5
100
8
11.5
99
0.15
5000 0.6
3.5
5.0
220 10
16
234
0.15 10000 0.6
5.0
5.0
330 10
20
293
0.15 10000 0.6
5.0
5.0
470
12.5 20
370
0.15 10000 0.6
5.0
5.0
5
15
6
0.12
7000 0.5
2.0
5.0
2.5
0.47
5
11
4.5
0.12
5000 0.5
2.0
5.0
2.5
5
15
12
0.12
7000 0.5
2.0
5.0
2.5
1
5
11
9
0.12
5000 0.5
2.0
5.0
2.5
2.2
5
11
16.5
0.12
5000 0.5
2.0
5.0
2.5
5
15
30
0.12
7000 0.5
2.0
5.0
2.5
3.3
5
11
20
0.12
5000 0.5
2.0
5.0
2.5
5
15
30
0.12
7000 0.5
2.0
5.0
2.5
4.7
5
11
23
0.12
5000 0.5
2.0
5.0
2.5
5
15
46
0.12
7000 0.5
2.0
5.0
2.5
10
63
5
11
30
0.12
5000 0.5
2.0
5.0
2.5
6.3
15
55
0.12
7000 0.5
2.5
5.0
2.5
22
6.3
11.2
40
0.12
5000 0.5
2.5
5.0
2.5
6.3
15
71
0.12
7000 0.5
2.5
5.0
2.5
33
6.3
11.2
50
0.12
5000 0.5
2.5
5.0
2.5
8
15
94
0.12 10000 0.6
3.5
5.0
47
8
11.5
80
0.12
5000 0.6
3.5
5.0
100
8
15
180
0.12 10000 0.6
3.5
5.0
220 10
20
292
0.12 10000 0.6
5.0
5.0
330
12.5 20
381
0.12 10000 0.6
5.0
5.0
470
12.5 25
454
0.12 10000 0.6
5.0
5.0
Min. Packaging Q'ty
Part No.
EEUEB1A101( )
EEUEB1A101S( )
EEUEB1A221( )
EEUEB1A221S( )
EEUEB1A471( )
EEUEB1A471S( )
EEUEB1A222( )
EEUEB1A332( )
EEUEB1C102( )
EEUEB1C222( )
EEUEB1E470( )
EEUEB1E470S( )
EEUEB1E101( )
EEUEB1E101S( )
EEUEB1E221S( )
EEUEB1E331( )
EEUEB1E471( )
EEUEB1E102( )
EEUEB1V330( )
EEUEB1V330S( )
EEUEB1V221( )
EEUEB1V331( )
EEUEB1V471( )
EEUEB1V102( )
EEUEB1HR47S( )✽✽✽
EEUEB1H1R0S( )✽✽✽
EEUEB1H2R2S( )
EEUEB1H3R3S( )
EEUEB1H4R7S( )
EEUEB1H100S( )
EEUEB1H220( )
EEUEB1H220S( )
EEUEB1H470( )
EEUEB1H470S( )
EEUEB1H101S( )
EEUEB1H221( )
EEUEB1H331( )
EEUEB1H471( )
EEUEB1JR47( )✽✽✽
EEUEB1JR47S( )✽✽✽
EEUEB1J1R0( )✽✽✽
EEUEB1J1R0S( )✽✽✽
EEUEB1J2R2S( )
EEUEB1J3R3( )
EEUEB1J3R3S( )
EEUEB1J4R7( )
EEUEB1J4R7S( )
EEUEB1J100( )
EEUEB1J100S( )
EEUEB1J220( )
EEUEB1J220S( )
EEUEB1J330( )
EEUEB1J330S( )
EEUEB1J470( )
EEUEB1J470S( )
EEUEB1J101( )
EEUEB1J221( )
EEUEB1J331( )
EEUEB1J471( )
Straight
Taping
Leads
(pcs)
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
(pcs)
2000
2000
2000
2000
1000
1000
500
500
500
500
2000
2000
2000
2000
1000
1000
500
500
2000
2000
1000
500
500
500
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
1000
500
500
500
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
1000
1000
1000
500
500
500
· When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 31/Mar/2015
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01
– EEE-88 –
Oct. 2013
Aluminum Electrolytic Capacitors/ EB
■ Standard Products
Endurance : 105 °C 5000 h
Case size
W.V.
(V)
Cap.
(±20 %)
(μF)
22
33
47
68
160
100
150
220
330
22
33
47
68
200
100
150
220
22
33
47
250
68
100
150
10
22
33
350
47
68
100
10
22
400
33
47
10
22
450
33
47
Dia.
(mm)
10
10
12.5
12.5
16
16
18
16
18
16
18
18
10
12.5
12.5
12.5
16
16
18
16
18
18
12.5
12.5
12.5
16
16
18
16
18
18
10
12.5
16
16
18
16
18
18
10
12.5
16
16
18
16
18
12.5
16
18
16
18
18
Specification
Ripple tan d EndurCurrent
ance
Length
(100 kHz) (120 Hz)
(+105 °C) (+20 °C)
(mm) (mA r.m.s.)
(hours)
20
470
0.15
5000
20
470
0.15
5000
20
600
0.15
5000
25
750
0.15
5000
20
750
0.15
5000
25
1060
0.15
5000
20
1060
0.15
5000
31.5
1280
0.15
5000
25
1280
0.15
5000
31.5
1280
0.15
5000
25
1280
0.15
5000
31.5
1690
0.15
5000
20
470
0.15
5000
20
600
0.15
5000
20
600
0.15
5000
25
750
0.15
5000
20
750
0.15
5000
25
1060
0.15
5000
20
1060
0.15
5000
31.5
1280
0.15
5000
25
1280
0.15
5000
31.5
1690
0.15
5000
20
560
0.15
5000
20
560
0.15
5000
25
710
0.15
5000
20
710
0.15
5000
25
990
0.15
5000
20
990
0.15
5000
31.5
1200
0.15
5000
25
1200
0.15
5000
31.5
1470
0.15
5000
20
270
0.20
5000
20
350
0.20
5000
20
480
0.20
5000
25
640
0.20
5000
20
640
0.20
5000
31.5
780
0.20
5000
25
780
0.20
5000
31.5
970
0.20
5000
20
250
0.24
5000
25
410
0.24
5000
20
410
0.24
5000
25
600
0.24
5000
20
600
0.24
5000
31.5
730
0.24
5000
25
730
0.24
5000
20
310
0.24
5000
25
560
0.24
5000
20
560
0.24
5000
31.5
680
0.24
5000
25
680
0.24
5000
31.5
850
0.24
5000
Lead Length
Lead
Lead Space
Dia.
Taping
Straight
✽B
(mm)
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.6
0.8
0.8
0.8
0.8
0.8
(mm)
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
7.5
7.5
7.5
7.5
7.5
5.0
7.5
7.5
7.5
7.5
7.5
(mm)
5.0
5.0
5.0
5.0
7.5
7.5
7.5
–
7.5
–
7.5
–
5.0
5.0
5.0
5.0
7.5
7.5
7.5
–
7.5
–
5.0
5.0
5.0
7.5
7.5
7.5
–
7.5
–
5.0
5.0
7.5
7.5
7.5
–
7.5
–
5.0
5.0
7.5
7.5
7.5
–
7.5
5.0
7.5
7.5
–
7.5
–
Min. Packaging Q'ty
Part No.
EEUEB2C220( )
EEUEB2C330( )
EEUEB2C470( )
EEUEB2C680( )
EEUEB2C680S( )
EEUEB2C101( )
EEUEB2C101S( )
EEUEB2C151
EEUEB2C151S( )
EEUEB2C221
EEUEB2C221S( )
EEUEB2C331
EEUEB2D220( )
EEUEB2D330( )
EEUEB2D470( )
EEUEB2D680( )
EEUEB2D680S( )
EEUEB2D101( )
EEUEB2D101S( )
EEUEB2D151
EEUEB2D151S( )
EEUEB2D221
EEUEB2E220( )
EEUEB2E330( )
EEUEB2E470( )
EEUEB2E470S( )
EEUEB2E680( )
EEUEB2E680S( )
EEUEB2E101
EEUEB2E101S( )
EEUEB2E151
EEUEB2V100( )
EEUEB2V220( )
EEUEB2V330S( )
EEUEB2V470( )
EEUEB2V470S( )
EEUEB2V680
EEUEB2V680S( )
EEUEB2V101
EEUEB2G100( )
EEUEB2G220( )
EEUEB2G220S( )
EEUEB2G330( )
EEUEB2G330S( )
EEUEB2G470
EEUEB2G470S( )
EEUEB2W100( )
EEUEB2W220( )
EEUEB2W220S( )
EEUEB2W330( )
EEUEB2W330S( )
EEUEB2W470
Straight
Taping
Leads
(pcs)
200
200
200
200
100
100
100
100
100
100
100
50
200
200
200
200
100
100
100
100
100
50
200
200
200
100
100
100
100
100
50
200
200
100
100
100
100
100
50
200
200
100
100
100
100
100
200
100
100
100
100
50
(pcs)
500
500
500
500
250
250
250
–
250
–
250
–
500
500
500
500
250
250
250
–
250
–
500
500
500
250
250
250
–
250
–
500
500
250
250
250
–
250
–
500
500
250
250
250
–
250
500
250
250
–
250
–
· When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01
– EEE-89 –
Oct. 2013