Comchip ESD Leaded Schottky Barrier Rectifiers SMD Diode Specialist SB520E-G Thru. SB5100E-G Voltage: 20 to 100 V Current: 5.0 A RoHS Device DO-201AD Features -Low drop down voltage. -5.0A operation at TA=75°C with no thermal runaway. -For use in low voltage, high frequency invertors free wheeling and polarity protection. -Silicon epitaxial planar chips. -ESD test under IEC6100-4-2 : Standard: >15KV(Air) & 8KV(Contact) -Lead-free part, meet RoHS requirements. 1.0(25.4) Min. 0.210(5.3) 0.189(4.8) 0.375(9.5) 0.287(7.3) Mechanical data 1.0(25.4) Min. 0.052(1.3) 0.048(1.2) -Epoxy: UL94-V0 rated flame retardant -Case: Molded plastic body DO-201AD -Terminals: Solderable per MIL-STD-750 Method 2026 Dimensions in inches and (millimeter) -Polarity: Color band denotes cathode end -Mounting Position: Any -Weight: 1.12grams Electrical Characteristics (at T =25°C unless otherwise noted) A Ratings at 25°C ambient temperature unless otherwise specified. Symbol SB 520E-G SB 540E-G SB 545E-G SB 550E-G SB 560E-G SB 580E-G SB 5100E-G Unit Maximum recurrent peak reverse voltage VRRM 20 40 45 50 60 80 100 V Maximum RMS voltage VRMS 14 28 30 35 42 56 70 V Maximum DC blocking voltage VDC 20 40 45 50 60 80 100 V Parameter Maximum average forward rectified current 0.5” (12.7mm) lead length at TA=75°C, See Figure 1 I(AV) A 5.0 Peak forward surge current IFSM 150 Maximum forward voltage at 5.0A (Note 1) VF 0.55 Maximum DC reverse current At rated DC blocking voltage IR 8.3ms single half sine-wave superimposed on rated load 125 A (JEDEC method) TL=110°C TA=25°C TA=100°C Typical junction capacitance (Note 2) Typical thermal resistance (Note 3) Operating junction temperature range Storage temperature range 0.70 V 0.85 0.5 mA 30 50 CJ 500 pF RθJA RθJL 35.0 15.0 °C/W TJ -65 to +125 TSTG -65 to +150 -65 to +150 °C °C NOTES: 1. Pulse test : 300µS pulse width, 1% duty cycle. 2. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts. 3. Thermal resistance from junction to ambient and from junction to lead P.C.B. mounted 0.500” (12.7mm) lead length with 2.5x2.5” (63.5x63.5mm) copper pad. REV:A Page 1 QW-BB043 Comchip Technology CO., LTD. Comchip ESD Leaded Schottky Barrier Rectifiers SMD Diode Specialist RATING AND CHARACTERISTIC CURVES (SB520E-G Thru. SB5100E-G) Fig.2 Maximum Non-repetitive Peak Forward Surge Current Fig.1 Forward Current Derating Curve 200 5.0 4.0 SB520E-G ~ SB545E-G 3.0 2.0 SB550E-G ~ SB5100E-G 1.0 single phase half wave 60Hz resistive or inductive load 3.75”(9.5mm) lead length 0 0 25 50 TL=110°C 8.3mS single half sine-wave (JEDEC Method) Peak Forward Surge Current (A) Average Forward Current (A) 6.0 150 100 SB520E-G ~ SB545E-G 50 SB550E-G ~ SB5100E-G 0 75 100 125 O Lead Temperature ( 1 10 100 175 150 C) Number of Cycles at 60Hz Fig.3 Typical Instantaneous Forward Characteristics Fig.4A Typical Reverse Characteristics 50 100 10 SB580E-G ~ SB5100E-G 1 SB550E-G ~ SB560E-G 0.1 SB520E-G ~ SB545E-G 0.01 Instantaneous Reverse Current (mA) Instantaneous Forward Current (A) SB520E-G ~ SB545E-G 10 TJ=125°C 1.0 TJ=100°C 0.1 0.01 TJ=25°C 0.001 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 1.6 Instantaneous Forward Voltage (V) 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage (%) Fig.5 Typical Junction Capacitance per leg Fig.4B Typeical Reverse Characteristic 5 10 SB550E-G ~ SB5100E-G Instantaneous Reverse Current (uA) Junction Capacitacne (pF) 10,000 1,000 TJ=25°C f=1.0MHz Vsig=50mVp-p 100 0.1 TJ=125°C 3 10 2 100 TJ=75°C 10 1 10 TJ=25°C 1 1.0 10 Reverse Voltage (V) TJ=150°C 4 10 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage ( %) REV:A Page 2 QW-BB043 Comchip Technology CO., LTD. Comchip ESD Leaded Schottky Barrier Rectifiers SMD Diode Specialist Marking Code Part Number Marking code Packaging SB520ET-G SB540ET-G SB545ET-G SB550ET-G SB560ET-G SB580ET-G SB5100ET-G SB520EA-G SB540EA-G SB545EA-G SB550EA-G SB560EA-G SB580EA-G SB5100EA-G SB520EB-G SB540EB-G SB545EB-G SB550EB-G SB560EB-G SB580EB-G SB5100EB-G SB520E SB540E SB545E SB550E SB560E SB580E SB5100E SB520E SB540E SB545E SB550E SB560E SB580E SB5100E SB520E SB540E SB545E SB550E SB560E SB580E SB5100E REEL REEL REEL REEL REEL REEL REEL AMMO AMMO AMMO AMMO AMMO AMMO AMMO BULK BULK BULK BULK BULK BULK BULK SBXXXE XXX / XXXX = Product type marking code Note: 1) Suffix code after part number to specify packaging item . Packaging REEL PACK AMMO PACK BULK PACK Code T A B Standard Packaging BULK PACK REEL PACK Case Type DO-201AD REEL Reel Size ( pcs ) (inch) 1,200 13 Case Type BOX ( pcs ) DO-201AD 200 AMMO PACK Case Type BOX ( pcs ) DO-201AD 1,200 REV:A Page 3 QW-BB043 Comchip Technology CO., LTD.