1.5SMC SERIES

1.5SMC SERIES
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 1500 Watts
BREAK DOWN VOLTAGE
6.8 to 250 Volt
FEATURES
• Plastic package has Underwriters Laboratory Flammability Classification 94V-O
• Glass passivated chip junction in SMC/DO-214AB package
• 1500W surge capability at 1ms
• Excellent clamping capability
• Low zener impedance
• Fast response time: typically less than 1 ps from 0 volts to BV min
• High temperature soldering guaranteed: 260°C/10 seconds/0.375",(9.5mm)
lead length/5lbs., (2.3kg) tension
• Lead free in compliance with EU RoHS 2011/65/EU directive
• Green molding compound as per IEC61249 Std. . (Halogen Free)
MECHANICAL DATA
• Case: JEDEC SMC/DO-214AB molded plastic
• Terminals: Axial leads, solderable per MIL-STD-750, Method 2026
• Polarity: Color band denotes cathode end
• Weight: 0.0082 ounce, 0.233 gram
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types 1.5SMC6.8 thru types 1.5SMC250.
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified.
Rating
Symbol
Value
Units
Peak Power Dissipation at T A=25OC, T P=1ms (Notes 1)
PPP
1500
Watts
Typical Thermal Resistance Junction to Air (Notes 2)
RθJA
50
Peak Pulse Current on tp=10/1000μs waveform (Notes 1)
IPPM
see Table
Amps
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (Notes 3)
I FSM
200
Amps
TJ,TSTG
-55 to +150
Operating Junction and Storage Temperature Range
O
C/W
O
C
NOTES :
1. Non-repetitive current pulse, per Fig. 3 and derated above TA =25°C per Fig. 2.
2. Mounted on Copper Leaf area of 0.79 in2(20mm2).
3. 8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum.
4. A transient suppressor is selected according to the working peak reverse voltage (VRWM), which should be equal to or greater than the DC
or continuous peak operating voltage level.
September 12,2014-REV.08
PAGE . 1
1.5SMC SERIES
Re ve rse
S ta nd -o ff
Vo lta g e
B re a kd o wn
Vo lta g e
Test Current
Reverse Leakage
Max. Clamp
Voltage
10/1000μs
Peak Pulse
Current
10/1000μs
Marking
Code
Part Number
V B R @ IT
IR @ V RWM
V RWM (Notes 4)
UNI
BI
IT
Mi n.
Ma x.
V
V
V
VC @ IPP
IPP
μA
V
A
UNI
BI
UNI
BI
mA
μA
1500W Transient Voltage Suppressor
1.5SMC6.8
1.5SMC6.8C
5.5
6.12
7.48
10
1000
2000
10.8
139
FZA
JZA
1.5SMC6.8A
1.5SMC6.8CA
5.8
6.45
7.14
10
1000
2000
10.5
143
FZB
JZB
1.5SMC7.5
1.5SMC7.5C
6.05
6.75
8.25
10
500
1000
11.7
128
FZC
JZC
1.5SMC7.5A
1.5SMC7.5CA
6.4
7.13
7.88
10
500
1000
11.3
132
FZD
JZD
1.5SMC8.2
1.5SMC8.2C
6.63
7.38
9.02
10
200
400
12.5
120
FZE
JZE
1.5SMC8.2A
1.5SMC8.2CA
7.02
7.79
8.61
10
200
400
12.1
124
FZF
JZF
1.5SMC9.1
1.5SMC9.1C
7.37
8.19
10
1
50
100
13.8
109
FZG
JZG
1.5SMC9.1A
1.5SMC9.1CA
7.78
8.65
9.5
1
50
100
13.4
112
FZH
JZH
1.5SMC10
1.5SMC10C
8.1
9
11
1
10
20
15
100
FZJ
JZJ
1.5SMC10A
1.5SMC10CA
8.55
9.5
10.5
1
10
20
14.5
103
FZK
JZK
1.5SMC11
1.5SMC11C
8.92
9.9
12.1
1
5
10
16.2
93
FZL
JZL
1.5SMC11A
1.5SMC11CA
9.4
10.5
11.6
1
5
10
15.6
96
FZM
JZM
1.5SMC12
1.5SMC12C
9.72
10.8
13.2
1
5
5
17.3
87
FZN
JZN
1.5SMC12A
1.5SMC12CA
10.2
11.4
12.6
1
5
5
16.7
90
FZP
JZP
1.5SMC13
1.5SMC13C
10.5
11.7
14.3
1
1
1
19
79
FZQ
JZQ
1.5SMC13A
1.5SMC13CA
11.1
12.4
13.7
1
1
1
18.2
82
FZR
JZR
1.5SMC15
1.5SMC15C
12.1
13.5
16.5
1
1
1
22
68
FZS
JZS
1.5SMC15A
1.5SMC15CA
12.8
14.3
15.8
1
1
1
21.2
71
FZT
JZT
1.5SMC16
1.5SMC16C
12.9
14.4
17.6
1
1
1
23.5
64
FZU
JZU
1.5SMC16A
1.5SMC16CA
13.6
15.2
16.8
1
1
1
22.5
67
FZV
JZV
1.5SMC18
1.5SMC18C
14.5
16.2
19.8
1
1
1
26.5
56.5
FZW
JZW
1.5SMC18A
1.5SMC18CA
15.3
17.1
18.9
1
1
1
25.2
59.5
FZX
JZX
1.5SMC20
1.5SMC20C
16.2
18
22
1
1
1
29.1
51.5
FZY
JZY
1.5SMC20A
1.5SMC20CA
17.1
19
21
1
1
1
27.7
54
FZZ
JZZ
1.5SMC22
1.5SMC22C
17.8
19.8
24.2
1
1
1
31.9
47
FXA
JXA
1.5SMC22A
1.5SMC22CA
18.8
20.9
23.1
1
1
1
30.6
49
FXB
JXB
1.5SMC24
1.5SMC24C
19.4
21.6
26.4
1
1
1
34.7
43
FXC
JXC
1.5SMC24A
1.5SMC24CA
20.5
22.8
25.2
1
1
1
33.2
45
FXD
JXD
1.5SMC27
1.5SMC27C
21.8
24.3
29.7
1
1
1
39.1
38.5
FXE
JXE
1.5SMC27A
1.5SMC27CA
23.1
25.7
28.4
1
1
1
37.5
40
FXF
JXF
1.5SMC30
1.5SMC30C
24.3
27
33
1
1
1
43.5
34.5
FXG
JXG
1.5SMC30A
1.5SMC30CA
25.6
28.5
31.5
1
1
1
41.4
36
FXH
JXH
1.5SMC33
1.5SMC33C
26.8
29.7
36.3
1
1
1
47.7
31.5
FXJ
JXJ
1.5SMC33A
1.5SMC33CA
28.2
31.4
34.7
1
1
1
45.7
33
FXK
JXK
1.5SMC36
1.5SMC36C
29.1
32.4
39.6
1
1
1
52
29
FXL
JXL
1.5SMC36A
1.5SMC36CA
30.8
34.2
37.8
1
1
1
49.9
30
FXM
JXM
1.5SMC39
1.5SMC39C
31.6
35.1
42.9
1
1
1
56.4
26.5
FXN
JXN
1.5SMC39A
1.5SMC39CA
33.3
37.1
41
1
1
1
53.9
28
FXP
JXP
1.5SMC43
1.5SMC43C
34.8
38.7
47.3
1
1
1
61.9
24
FXQ
JXQ
September 12,2014-REV.08
PAGE . 2
1.5SMC SERIES
Revers e
S tand-off
Voltage
B re akd own
Voltag e
Test Current
Reverse Leakage
Max. Clamp
Voltage
10/1000μs
Peak Pulse
Current
10/1000μs
Marking
Code
Part Number
V B R @ IT
IR @ VRWM
V RWM (Notes 4)
UNI
BI
IT
Mi n.
Ma x.
V
V
V
36.8
40.9
V C @ IPP
IPP
μA
V
A
UNI
BI
1
1
59.3
25.3
FXR
JXR
UNI
BI
mA
μA
45.2
1
1500W Transient Voltage Suppressor
1.5SMC43A
1.5SMC43CA
1.5SMC47
1.5SMC47C
38.1
42.3
51.7
1
1
1
67.8
22.2
FXS
JXS
1.5SMC47A
1.5SMC47CA
40.2
44.7
49.4
1
1
1
64.8
23.2
FXT
JXT
1.5SMC51
1.5SMC51C
41.3
45.9
56.1
1
1
1
73.5
20.4
FXU
JXU
1.5SMC51A
1.5SMC51CA
43.6
48.5
53.6
1
1
1
70.1
21.4
FXV
JXV
1.5SMC56
1.5SMC56C
45.6
50.4
61.6
1
1
1
80.5
18.6
FXW
JXW
1.5SMC56A
1.5SMC56CA
47.8
53.2
58.8
1
1
1
77
19.5
FXX
JXX
1.5SMC62
1.5SMC62C
50.2
55.8
68.2
1
1
1
89
16.9
FXY
JXY
1.5SMC62A
1.5SMC62CA
53
58.9
65.1
1
1
1
85
17.7
FXZ
JXZ
1.5SMC68
1.5SMC68C
55.1
61.2
74.8
1
1
1
98
15.3
FYA
JYA
1.5SMC68A
1.5SMC68CA
58.1
64.6
71.4
1
1
1
92
16.3
FYB
JYB
1.5SMC75
1.5SMC75C
60.7
67.5
82.5
1
1
1
108
13.9
FYC
JYC
1.5SMC75A
1.5SMC75CA
64.1
71.3
78.8
1
1
1
103
14.6
FYD
JYD
1.5SMC82
1.5SMC82C
66.4
73.8
90.2
1
1
1
118
12.7
FYE
JYE
1.5SMC82A
1.5SMC82CA
70.1
77.9
86.1
1
1
1
113
13.3
FYF
JYF
1.5SMC91
1.5SMC91C
73.7
81.9
100
1
1
1
131
11.4
FYG
JYG
1.5SMC91A
1.5SMC91CA
77.8
86.5
95.5
1
1
1
125
12
FYH
JYH
1.5SMC100
1.5SMC100C
81
90
110
1
1
1
144
10.4
FYJ
JYJ
1.5SMC100A
1.5SMC100CA
85.5
95
105
1
1
1
137
11
FYK
JYK
1.5SMC110
1.5SMC110C
89.2
99
121
1
1
1
158
9.5
FYL
JYL
1.5SMC110A
1.5SMC110CA
94
105
116
1
1
1
152
9.9
FYM
JYM
1.5SMC120
1.5SMC120C
97.2
108
132
1
1
1
173
8.7
FYN
JYN
1.5SMC120A
1.5SMC120CA
102
114
126
1
1
1
165
9.1
FYP
JYP
1.5SMC130
1.5SMC130C
105
117
143
1
1
1
187
8
FYQ
JYQ
1.5SMC130A
1.5SMC130CA
111
124
137
1
1
1
179
8.4
FYR
JYR
1.5SMC150
1.5SMC150C
121
135
165
1
1
1
215
7
FYS
JYS
1.5SMC150A
1.5SMC150CA
128
143
158
1
1
1
207
7.2
FYT
JYT
1.5SMC160
1.5SMC160C
130
144
176
1
1
1
230
6.5
FYU
JYU
1.5SMC160A
1.5SMC160CA
136
152
168
1
1
1
219
6.8
FYV
JYV
1.5SMC170
1.5SMC170C
138
153
187
1
1
1
244
6.2
FYW
JYW
1.5SMC170A
1.5SMC170CA
145
162
179
1
1
1
234
6.4
FYX
JYX
1.5SMC180
1.5SMC180C
146
162
198
1
1
1
258
5.8
FYY
JYY
1.5SMC180A
1.5SMC180CA
154
171
189
1
1
1
246
6.1
FYZ
JYZ
1.5SMC200
1.5SMC200C
162
180
220
1
1
1
287
5.2
FWA
JWA
1.5SMC200A
1.5SMC200CA
171
190
210
1
1
1
274
5.5
FWB
JWB
1.5SMC220
1.5SMC220C
175
198
242
1
1
1
344
4.3
FWC
JWC
1.5SMC220A
1.5SMC220CA
185
209
231
1
1
1
328
4.6
FWD
JWD
1.5SMC250
1.5SMC250C
202
225
275
1
1
1
360
4.3
FWE
JWE
1.5SMC250A
1.5SMC250CA
214
237
263
1
1
1
344
4.5
FWF
JWF
September 12,2014-REV.08
PAGE . 3
100
100
Non-Repetitve
Pulse Wavefom
Shown in Figure.3
O
T A = 25 C
10
1.0
0.1
0.1
1.0
10
100
1000
10000
PEAK PULSE FORWARD (P PP) OR CURRENT (I PP)
DERATING IN PERCENTAGE %
P PPM ,PEAK PULSE FORWARD,KW
1.5SMC SERIES
75
50
25
0
0
td,PULSE WIDTH,usec
75
100
125
10 4
TA = 25 C
Pulse Wid th (td ) is Define d
a s the Point Where t he Pea k
Current De c a ys to 5 0% of Ip p
Pea k Va lue
Ip p m
100
Ha lf Va lue -Ip p
2
10/1000u se c Wa ve form
a s Defined b ye R.E.A.
50
100
10
1.0
2.0
3.0
Me a sure d a t
Sta nd -Off
Volta ge(V RWM )
5.0 10
20
50
100
200
500
4.0
V (BR) , BREAKDOWN VOLTAGE, VOLTS
T,TIME,ms
Fig.4 TYPICAL JUNCTION CAPACITANCE
Fig.3 PULSE WAVEFORM
200
Me a sured a t
Zero Bia s
Unidirectional
Bidirectional
td
0
200
Tj= 25 C
f= 1.0MHZ
Vsig = 50mVp -p
1,000
e-kt
0
175
Fig.2 PULSE DERATING CURVE
150
tf= 10u se c
150
O
CJ,CAPACITANCE,p F
I PPM ,PEAK PULSE CURRENT,%
50
T A ,AMBIENT TEMPERATURE, C
Fig.1 PEAK PULSE POWER RATING VERSUS
PULSE TIME CURVE
IFSM , PEAK FORWARD SURGE CURRENT
AMPERES
25
Tj= Tj m a x
8.3ms SINGLE HALF sinc e -WAVE
JEDEC METHOD
100
50
UNIDIRECTIONAL ONLY
10
1
5
10
50
100
NUMBER OF CYCLES AT 60 Hz
Fig.5 MAXIMUN NON-REPETITEVE PEAK FORWARD
SURGE CURRENT UNIDIRECTIONAL
September 12,2014-REV.08
PAGE . 4
1.5SMC SERIES
MOUNTING PAD LAYOUT
ORDER INFORMATION
• Packing information
T/R - 3K per 13" plastic Reel
T/R - 0.5K per 7" plastic Reel
September 12,2014-REV.08
PAGE . 5
1.5SMC SERIES
Part No_packing code_Version
1.5SMC6.8_R1_00001
1.5SMC6.8_R2_00001
For example :
RB500V-40_R2_00001
Serial number
Version code means HF
Packing size code means 13"
Part No.
Packing type means T/R
Packing Code XX
Packing type
Tape and Ammunition Box
(T/B)
Tape and Reel
(T/R)
Bulk Packing
(B/P)
Tube Packing
(T/P)
Tape and Reel (Right Oriented)
(TRR)
Tape and Reel (Left Oriented)
(TRL)
FORMING
September 12,2014-REV.08
Version Code XXXXX
1st Code
Packing size code
A
N/A
0
HF
0
serial number
R
7"
1
RoHS
1
serial number
B
13"
2
T
26mm
X
S
52mm
Y
L
F
PANASERT T/B CATHODE UP
(PBCU)
PANASERT T/B CATHODE DOWN
(PBCD)
2nd Code HF or RoHS 1st Code 2nd~5th Code
U
D
PAGE . 6
1.5SMC SERIES
Disclaimer
• Reproducing and modifying information of the document is prohibited without permission
from Panjit International Inc..
• Panjit International Inc. reserves the rights to make changes of the content herein the
document anytime without notification. Please refer to our website for the latest
document.
• Panjit International Inc. disclaims any and all liability arising out of the application or use of
any product including damages incidentally and consequentially occurred.
• Panjit International Inc. does not assume any and all implied warranties, including warranties
of fitness for particular purpose, non-infringement and merchantability.
• Applications shown on the herein document are examples of standard use and operation.
Customers are responsible in comprehending the suitable use in particular applications.
Panjit International Inc. makes no representation or warranty that such applications will be
suitable for the specified use without further testing or modification.
•
The products shown herein are not designed and authorized for equipments requiring high
level of reliability or relating to human life and for any applications concerning life-saving
or life-sustaining, such as medical instruments, transportation equipment, aerospace
machinery et cetera. Customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages
resulting from such improper use or sale.
• Since Panjit uses lot number as the tracking base, please provide the lot number for tracking
when complaining.
September 12,2014-REV.08
PAGE . 7