PRODUCT INFORMATION swiss world connects IP0001.00 SMD socket and pin connectors, parallel mount 1. Description and general features General description Low profile surface mount socket and pin connectors for parallel mounting. The number of contacts for each connector is from 2 to 10 poles. This pair of connectors is an optimal solution to connect and stack printed circuit boards. Both carriers are made of high temperature plastic and maintain the contacts in place during the soldering operation. Carrier is used as a pick & place cap allowing automatic positioning on the PCB. Cap is not foreseen to be removed after soldering. Both connectors can be supplied either in bulk or in a tape & reel packaging. Challenge was to develop a connector that will be soldered on a minimum PCB surface. Advantages Main advantage of this connector is its small size and it can be soldered from underneath. Optimal connection between two PCB. Reliable technology using our BeCu clip with 500 cycles guaranteed. The maximum current rating is 3 Amps. Applications Pair of connectors (socket connector & pin header) has originally been designed and developed for a connection between two LED lighting strips. Each strip is equipped on one end with a 2-way socket connector and on the other end with a pin header. LED lighting strips are stackable. For this application, a connector with SMD solder tails at the back of the connector was not possible due to space limitation. This type of connectors can of course be used in many other applications where a board-to-board connection is needed. Optional versions Current version can be modified to meet with your specific requirements. Plastic carrier and contacts can easily be adapted to fit your application. 1 2. Technical Specifications Mechanical Characteristics Environtmental Operating temperature -55 ... + 125°C Mating pins (socket) Diameter 0.70 to 0.90 mm Climatic category (IEC) 55 / 125 / 21 Connecting pin 0.76 mm Solderability 245°C, 5s Mechanical life Min. 500 cycles Resistance to soldering heat 260°C, 10s Coplanarity SMD terminations Max. 0.1 mm Electrical Characteristics Materials Contact body (socket) Contact body (pin) Contact spring Insulator Machined brass C36000, tin plating 5 μm Sn over 2.5 μm Ni Operating voltage 100 VRMS / 150 VDC Machined brass C36000, gold plating 0.25 μm Sn over 2.5 μm Ni Rated current 3A Contact resistance max 10 mΩ Insulation resistance Min. 10'000 MΩ at 500 VaC Dielectric strength 500 VRMS Air and creepage distances 0.70 mm Capacitance 1 pF max. BeCu C17200, gold plated (gold flash or 0.75 μm) over Ni Glass filled polyester PCT-GF30FR, self-extinguishing UL94V-0, colour black 3. Ordering Information Dimensions, Order Code Numbers Socket connector 8FM-PP-0NNN-02-278 Contact Plating Code -PP-: 78-Body: tin Clip: gold flash 38-Body: tin Clip: 0.75 µm gold Code for number of contacts –0NNN-: 2 to 10 contacts Pin connector 8MM-11-0NNN-02-279 Contact Plating Code -11-: Body and clip: 0.25 µm gold Code for number of contacts –0NNN-: 2 to 10 contacts Packaging Information Available in bulk or in tape & reel packaging. 4. TECHNICAL DRAWINGS Socket conector 8FM-PP-0NNN-02-278 Pin conector 8MM-11-0NNN-02-279 2