PCB CONNECTORS - EBY Electro Inc.

PCB CONNECTORS
PCB CONNECTORS
QUICK SELECTOR CHART
PCB CONNECTORS
72
75
85, 86
87, 88
89, 90
91, 100*
TRIPLE ROW
DOUBLE ROW
dia. 0.76 mm (* ◊ 1 mm)
DOUBLE ROW
SINGLE ROW
dia. 0.47 mm
SEE PAGE
44
Right angle
solder tail
46
47
46
46
48
48
48
55*, 57 57
58, 59 58, 59
60
69, 70 69, 70
71, 72 71,72
74, 75 73, 74
75
60
Surface mount
perpendicular
floating pin
62
Surface mount
perpendicular
gull-wing
Surface mount
parallel
2.54 mm
MATING PIN
SINGLE ROW
Straight
solder tail
2.54 mm
MATING PIN
TRIPLE ROW
SOCKET CONNECTORS
QUAD ROW
DOUBLE ROW
2 mm (* 1.778 / 1.8 mm)
SINGLE ROW
1.27 mm
TRIPLE ROW
1 mm
SINGLE ROW
GRID
[email protected]
DOUBLE ROW
TEL +41 32 421 04 00
SINGLE ROW
WWW.PRECIDIP.COM
49
44
49, 50
61
50
61
62
Solderless
compliant
press-fit
63
76
76
92, 93
92
77
77
94
94
77
77
78
63
85,86 86, 87
87, 89 89, 90
90, 91
100*
94, 95 94, 95
96
79, 80 79, 80
Wire-wrap
81, 82 81, 82
Carrier
83, 84
97, 98 97, 98
99
99
PIN CONNECTORS
Straight
solder tail
45
Right angle
solder tail
51
51
51
56*, 64
65
52
52
52
65
65
Surface mount
perpendicular
floating pin
Surface mount
perpendicular
gull-wing
Surface mount
parallel
53
45
54
53, 54
66
66
67
101
101
to 104 to 104
105
105
112
113*
112
113
106
106
114
114
106
106
114
115
114
115
107
Solderless
compliant
press-fit
108
SQUARE PIN CONNECTORS
109
109
to 111 to 111
110
111
113
115
108
116
117
0.5 mm
116
117
117
0.635 mm
Straight
solder tail
68
68
118
118
118
Right angle
solder tail
68
68
119
119
119
HEADERS / JUMPERS
• Slotted head
• Turret head
• Solder cup
• Male jumpers
• Female jumpers
42
120
121
123
122
123
Due to technical progress, all information provided is subject to change without prior notice.
PCB CONNECTORS
GENERAL SPECIFICATIONS
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
The values listed below are general specs applying for Preci-Dip socket and pin connectors. Please see individual catalog page for additional and
product specific technical data.
-55 ... +125 °C
55/125/21
Annual mean 75%
100 VRMS /150 VDC (2.54 mm grid)
OPERATING TEMPERATURE RANGE
CLIMATIC CATEGORY (IEC)
OPERATING HUMIDIT Y RANGE
MA X. WORKING VOLTAGE
®
Preci-Dip products are recognized by Underwriters Laboratories Inc. and listed under “Connectors for Use in Data, Signal, Control and
Power Applications“, File Nr. E174442.
PACKAGING
MECHANICAL CHARACTERISTICS
CLIP RETENTION
CONTACT (SLEEVE / CLIP) RETENTION
Min. 40 N (no displacement under axial force applied)
Min. 3.3 N acc. to MIL-DTL-83734, pt 4.6.4.2
ELECTRICAL CHARACTERISTICS
INSUL ATION RESISTANCE BETWEEN ANY TWO ADJACENT CONTACTS
CAPACITANCE BETWEEN ANY TWO ADJACENT CONTACTS
• Standard connector packaging is card box.
• SMD mount connectors available on request
with Tape & Reel packaging acc. to EIA Standard 481.
These products are marked with the symbol:
Min. 10’000 MΩ at 500 VAC
Max. 1 pF
AIR AND CREEPAGE DISTANCES BETWEEN ANY TWO ADJACENT CONTACTS
SERIE
mm
3xx/4xx/7xx
0.7
80x
0.85 / 0.7
83x
0.5
85x
0.4 / 0.5
T & R Packaging
86x
0.5
ENVIRONMENTAL CHARACTERISTICS
Please consult www.precidip.com for availability
size of tape, size of reel, number of components
per reel and packing units.
The sockets withstand the following environmental tests without mechanical
and electrical defects:
• Dry heat steady state IEC 60512-11-9.11i / 60068-2-2.Bb: 125 °C, 16 h
• Damp heat cyclic IEC 60512-11-12.11m / 60068-2-30.Db: 25/55 °C, 90 – 100 %rH,
1 cycle of 24 h
• Cold steady state IEC 60512-11-10.11j / 60068-2-1.A: -55 °C, 2 h
• Thermal shock IEC 60512-11-4.11d / 60068-2-14.Na: -55/125 °C, 5 cycles 30 min.
• Sinusoidal vibrations IEC 60512-6-4.6d / 60068-2-6.Fc: 10 to 500 Hz, 10 g,
1 octave/min., 10 cycles for each axis
• Shock IEC 60512-6-3.6c / 60068-2-27.Ea: 50 g, 11 ms, 3 shocks in three axis
During the above two tests, no contact interruption >50 ns does appear.
• Solderability J-STD-002A, Test A, 245 °C, 5 s, solder alloy SnAg3.8Cu0.7
• Resistance to soldering heat J-STD-020C, 260 °C, 20 s
• Moisture sensitivity J-STD-020C level 1
• Resistance to corrosion:
1) Salt spray test IEC 60068-2-11.Ka: 48 h
2) Sulfur dioxide (SO2) test IEC 60068-2-42 Kc: 96 h at 25 ppm SO2,
25 °C, 75 %rH
3) Hydrogen sulfide (H2S) test IEC 60068-2-43 Kd: 96 h at 12 ppm H2S,
25 °C, 75 %rH
SOLDERLESS COMPLIANT PRESS-FIT CHARACTERISTICS
PRESS-FIT CHARACTERISTICS MEASURED ACC. TO IEC 60352-5
• Press-in force:
• Push-out force:
• Push-out 3rd cycle:
90 N max. (at min. hole dia.) / 65 N typ.
30 N min. (at max. hole dia.) / 50 N typ.
20 N min. (at max. hole dia.)
PCB HOLE DIMENSIONS
• 2 mm grid
• 2.54 mm grid
Finished hole Ø: 0.7 + 0.09/-0.06 mm
Drilled hole Ø: 0.8 ± 0.02 mm
Finished hole Ø: 1 + 0.09/-0.06 mm
Drilled hole Ø: 1.15 ± 0.02 mm
PCB HOLE PL ATING
PCB surface finish
• Tin
• Copper
• Gold over nickel
Hole plating
5-15 μm tin over min. 25 μm copper
min. 25 μm copper
0.05-0.2 μm gold over 2.5-5 μm nickel
over min. 25 μm copper
Due to technical progress, all information provided is subject to change without prior notice.
43
PCB CONNECTORS
UL
SOCKET CONNECTORS 1 mm
SINGLE ROW / SOLDER TAIL / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Ultraminiature PCB socket connectors, solder tail and SMD parallel mount.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.36 to 0.46 mm
0.25 N typ. insertion
0.15 N typ. withdrawal
(polished steel gauge Ø 0.40 mm)
Min. 500 cycles
1A
Max. 10 mΩ
Min. 500 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.1 mm (measured on 25 mm long connectors)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
For corresponding pin connectors, see page 45.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 861-87-NNN-10-001101 for a single row version with 8 pins becomes
861-87-008-10-001101.
861-PP-NNN-10-001101
Straight socket connector low profile, solder tail, single row
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
861-PP-NNN-40-001101
SMD socket connector, single row, parallel mount
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
For connectors having more than 24 contacts,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
44
Due to technical progress, all information provided is subject to change without prior notice.
PIN CONNECTORS 1 mm
SINGLE ROW / SOLDER TAIL / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Ultraminiature PCB pin connectors, solder tail and SMD parallel mount.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.40 mm
Min. 500 cycles
1A
Min. 500 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.1 mm (measured on 25 mm long connectors)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
0.25 μm gold
0.25 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 860-10-NNN-10-001101 for a single row version with 8 pins becomes
860-10-008-10-001101.
860-10-NNN-10-001101
Straight pin connector low profile, solder tail, single row
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
860-10-NNN-40-001101
SMD pin connector, single row, parallel mount
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
For connectors having more than 24 contacts,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
Due to technical progress, all information provided is subject to change without prior notice.
45
PCB CONNECTORS
For corresponding socket connectors, see page 44.
SOCKET CONNECTORS 1.27 mm
SINGLE ROW / DOUBLE ROW / TRIPLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Ultraminiature PCB socket connectors, solder tail
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (3 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000
Beryllium copper (C17200)
0.38 to 0.50 mm
0.5 N typ. insertion
0.2 N typ. withdrawal
(polished steel gauge Ø 0.41 mm)
Min. 500 cycles
1A
Max. 20 mΩ
Min. 500 VRMS
For corresponding pin connectors, see pages 51-54.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 851-87-NNN-10-001101 for a single row version with 8 pins becomes
851-87-008-10-001101
851-PP-NNN-10-001101
Straight socket connector, solder tail, single row
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 25 and 50)
853-PP-NNN-10-001101
Straight socket connector, solder tail, double row
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 50 and 100)
853-PP-NNN-10-002101
Straight socket connector, solder tail, double row with 2.54 mm
row to row distance
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
855-PP-NNN-10-001101
Straight socket connector, solder tail, triple row
AVAIL ABILIT Y FROM
9 to 150 contacts
(standard number of contacts: 150)
46
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 1.27 mm
SINGLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Ultraminiature PCB socket connectors, solder tail
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (3 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.38 to 0.50 mm
0.5 N typ. insertion
0.2 N typ. withdrawal
(polished steel gauge Ø 0.41 mm)
Min. 500 cycles
1A
Max. 20 mΩ
Min. 500 VRMS
PCB CONNECTORS
INSUL ATOR
For corresponding pin connectors, see pages 51-54.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
851-PP-009-10-477101
Straight socket connector height 8.8 mm, solder tail, single row
Standard number of contacts: 9
Please consult for other pin number
Due to technical progress, all information provided is subject to change without prior notice.
47
SOCKET CONNECTORS 1.27 mm
SINGLE ROW / DOUBLE ROW / TRIPLE ROW / SOLDER TAIL, RIGHT ANGLE
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Ultraminiature PCB socket connectors, solder tail right angle.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (3 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.38 to 0.50 mm
0.5 N typ. insertion
0.2 N typ. withdrawal
(polished steel gauge Ø 0.41 mm)
Min. 500 cycles
1A
Max. 20 mΩ
Min. 500 VRMS
For corresponding pin connectors, see pages 51-54.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 851-87-NNN-20-001101 for a single row version with 8 pins becomes
851-87-008-20-001101.
851-PP-NNN-20-001101
Right angle socket connector, solder tail, single row
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 25 and 50)
853-PP-NNN-20-001101
Right angle socket connector, solder tail, double row
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 50 and 100)
853-PP-NNN-20-002101
Right angle socket connector, solder tail, double row with 2.54 mm
row to row distance
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
855-PP-NNN-20-001101
Right angle receptacle, solder tail, triple row
AVAIL ABILIT Y FROM
9 to 150 contacts
(standard number of contacts: 150)
48
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 1.27 mm
SINGLE ROW / DOUBLE ROW / TRIPLE ROW / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Ultraminiature PCB socket connectors, SMD mount.
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.35 to 0.50 mm
0.5 N typ. insertion
0.2 N typ. withdrawal
(polished steel gauge Ø 0.41 mm)
Min. 500 cycles
1A
Max. 20 mΩ
Min. 500 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.1 mm (measured on 25 mm long connectors)
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (3 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
For corresponding pin connectors, see pages 51-54.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 851-83-NNN-30-001101 for a single row version with 8 pins becomes
851-83-008-30-001101.
851-PP-NNN-30-001101
SMD socket connector, single row, perpendicular mount
AVAIL ABILIT Y FROM
3 to 50 contacts
(standard number of contacts: 25 and 50)
For connectors having more than 19 contacts,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
853-PP-NNN-30-001101
SMD socket connector, double row, perpendicular mount
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 50 and 100)
For connectors having more than 19 contacts per row,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
853-PP-NNN-30-002101
SMD socket connector, double row with 2.54 mm row to row distance,
perpendicular mount
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
For connectors having more than 19 contacts per row,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
851-PP-NNN-30-136101
SMD socket connector, single row, perpendicular mount
with 2 positioning pins
AVAIL ABILIT Y FROM
5 to 50 contacts
(standard number of contacts: 25 and 50)
For connectors having more than 19 contacts,
the coplanarity issue is to be addressed specifically
Due to technical progress, all information provided is subject to change without prior notice.
49
PCB CONNECTORS
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
SOCKET CONNECTORS 1.27 mm
SINGLE ROW / DOUBLE ROW / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Ultraminiature PCB socket connectors, SMD mount.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.38 to 0.50 mm
0.5 N typ. insertion
0.2 N typ. withdrawal
(polished steel gauge Ø 0.41 mm)
Min. 500 cycles
1A
Max. 20 mΩ
Min. 500 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.1 mm (measured on 25 mm long connectors)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
For corresponding pin connectors, see pages 51-54.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 851-83-NNN-40-001101 for a single row version with 8 pins becomes
851-83-008-40-001101.
853-PP-NNN-30-051101
SMD socket connector, double row with 2.54 mm row to row distance,
perpendicular mount with 2 positioning pins
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
For connectors having more than 19 contacts per row,
the coplanarity issue is to be addressed specifically
851-PP-NNN-40-001101
SMD socket connector, single row, parallel mount with long solder
termination
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 25 and 50)
For connectors having more than 19 contacts,
the coplanarity issue is to be addressed specifically
851-PP-NNN-40-252101
SMD socket connector, single row, parallel mount
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 25 and 50)
For connectors having more than 19 contacts,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
50
Due to technical progress, all information provided is subject to change without prior notice.
PIN CONNECTORS 1.27 mm
SINGLE ROW / DOUBLE ROW / TRIPLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Ultraminiature PCB pin connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.41 mm
Min. 500 cycles
1A
Min. 1’000 VRMS
For corresponding socket connectors, see pages 46-50.
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
80
0.25 μm gold
Tin
0.25 μm gold
Tin
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 852-10-NNN-10-001101 for a double row version with 16 pins
becomes 852-10-016-10-001101.
850-PP-NNN-10-001101
Straight pin connector, solder tail, single row
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 25 and 50)
852-PP-NNN-10-001101
Straight pin connector, solder tail, double row
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 50 and 100)
852-PP-NNN-10-002101
Straight pin connector, solder tail, double row with 2.54 mm
row to row distance
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
854-PP-NNN-10-001101
Straight pin connector, solder tail, triple row
AVAIL ABILIT Y FROM
9 to 150 contacts
(standard number of contacts: 150)
Due to technical progress, all information provided is subject to change without prior notice.
51
PCB CONNECTORS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PIN CONNECTORS 1.27 mm
SINGLE ROW / DOUBLE ROW / TRIPLE ROW / SOLDER TAIL, RIGHT ANGLE
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Ultraminiature PCB pin connectors, solder tail, right angle.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.41 mm
Min. 500 cycles
1A
Min. 1’000 VRMS
For corresponding socket connectors, see pages 46-50.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
80
0.25 μm gold
Tin
0.25 μm gold
Tin
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 852-10-NNN-20-001101 for a double row version with 16 pins
becomes 852-10-016-20-001101.
850-PP-NNN-20-001101
Right angle pin connector, solder tail, single row
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 25 and 50)
852-PP-NNN-20-001101
Right angle pin connector, solder tail, double row
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 50 and 100)
852-PP-NNN-20-002101
Right angle pin connector, solder tail, double row with 2.54 mm
row to row distance
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
854-PP-NNN-20-001101
Right angle pin connector, solder tail, triple row
AVAIL ABILIT Y FROM
9 to 150 contacts
(standard number of contacts: 150)
52
Due to technical progress, all information provided is subject to change without prior notice.
PIN CONNECTORS 1.27 mm
SINGLE ROW / DOUBLE ROW / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Ultraminiature PCB pin connectors, SMD mount.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.41 mm
Min. 500 cycles
1A
Min. 1’000 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.1 mm (measured on 25 mm long connectors)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
80
0.25 μm gold
Tin
0.25 μm gold
Tin
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 852-10-NNN-30-001101 for a double row version with 16 pins
becomes 852-10-016-30-001101.
850-PP-NNN-30-001101
SMD pin connector, single row, perpendicular mount
AVAIL ABILIT Y FROM
3 to 50 contacts
(standard number of contacts: 25 and 50)
For connectors having more than 19 contacts,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
852-PP-NNN-30-001101
SMD pin connector, double row, perpendicular mount
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 50 and 100)
For connectors having more than 19 contacts per row,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
852-PP-NNN-30-002101
SMD pin connector, double row with 2.54 mm row to row distance,
perpendicular mount
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
For connectors having more than 19 contacts per row,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
850-PP-NNN-30-135101
SMD pin connector, single row, perpendicular mount with 2 positioning pins
AVAIL ABILIT Y FROM
5 to 50 contacts
(standard number of contacts: 25 and 50)
For connectors having more than 19 contacts,
the coplanarity issue is to be addressed specifically
Due to technical progress, all information provided is subject to change without prior notice.
53
PCB CONNECTORS
For corresponding socket connectors, see pages 46-50.
PIN CONNECTORS 1.27 mm
SINGLE ROW / DOUBLE ROW / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Ultraminiature PCB pin connectors, SMD mount.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.41 mm
Min. 500 cycles
1A
Min. 1’000 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.1 mm (measured on 25 mm long connectors)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
For corresponding socket connectors, see pages 46-50.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
80
0.25 μm gold
Tin
0.25 μm gold
Tin
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 850-10-NNN-40-001101 for a single row version with 16 pins
becomes 850-10-016-40-001101.
852-PP-NNN-30-051101
SMD pin connector, double row with 2.54 mm row to row distance,
perpendicular mount with 2 positioning pins
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
For connectors having more than 19 contacts per row,
the coplanarity issue is to be addressed specifically
850-PP-NNN-40-001101
SMD pin connector, single row, parallel mount with long solder termination
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 25 and 50)
For connectors having more than 19 contacts,
the coplanarity issue is to be addressed specifically
850-PP-NNN-40-251101
SMD pin connector, single row, parallel mount short solder termination
and wider insulator for easier pick and place
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
For connectors having more than 19 contacts,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
54
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS
1.778 and 1.8 mm
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
SINGLE ROW / SOLDER TAIL
Socket connectors, with reduced grid spacing 1.778 and 1.8 mm, solder tail.
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 500 cycles
1A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see page 56.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 317-87-1NN-41-005101 for a single row version with 8 pins becomes
317-87-108-41-005101.
317-PP-1NN-41-005101
Straight socket connector, single row, grid spacing 1.778 mm
AVAIL ABILIT Y FROM
2 to 38 contacts
(standard number of contacts: 38)
317-PP-1NN-41-022101
Straight socket connector elevated, single row, grid spacing 1.778 mm
AVAIL ABILIT Y FROM
2 to 38 contacts
(standard number of contacts: 38)
317-PP-1NN-41-026101
Straight socket connector elevated, single row, grid spacing 1.778 mm
AVAIL ABILIT Y FROM
2 to 38 contacts
(standard number of contacts: 38)
317-PP-1NN-01-687101
Straight socket connector, single row, grid spacing 1.8 mm for LCD-displays
AVAIL ABILIT Y FROM
2 to 42 contacts
(standard number of contacts: 42)
Due to technical progress, all information provided is subject to change without prior notice.
55
PCB CONNECTORS
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
PIN CONNECTORS 1.778 mm
SINGLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
PCB pin connectors, solder tail with reduced pin spacing 1,778 mm.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.47 mm
Min. 500 cycles
1A
Min. 1’000 VRMS
For corresponding socket connectors, see page 55.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
80
0.25 μm gold
Tin
0.25 μm gold
Tin
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 350-10-1NN-00-012101 for a single row version with 8 pins becomes
350-10-108-00-012101.
350-PP-1NN-00-012101
Straight pin connector, single row, grid spacing 1.778 mm
AVAIL ABILIT Y FROM
2 to 38 contacts
(standard number of contacts: 38)
56
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 2 mm
SINGLE ROW / DOUBLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
"Hard metric" PCB socket connectors, solder tail.
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polymer LCP-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
Ø 0.40 to 0.66 mm,
0.50 mm
0.7 N typ. insertion
0.4 N typ. withdrawal
(polished steel gauge Ø 0.46 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 64-68.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 833-87-NNN-10-001101 for a double row version with 16 pins
becomes 833-87-016-10-001101.
831-PP-NNN-10-273101
Straight socket connector, low profile height 2.8 mm, solder tail, single row
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
833-PP-NNN-10-273101
Straight socket connector, low profile height 2.8 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
831-PP-NNN-10-001101
Straight socket connector, height 4.2 mm, solder tail, single row
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
833-PP-NNN-10-001101
Straight socket connector, height 4.2 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
Due to technical progress, all information provided is subject to change without prior notice.
57
PCB CONNECTORS
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
SOCKET CONNECTORS 2 mm
SINGLE ROW / DOUBLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
"Hard metric" PCB socket connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polymer LCP-GF30-FR
(PCT-GF30-FR for 833...10-457101)
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
Ø 0.40 to 0.56 mm,
0.50 mm
0.7 N typ. insertion
0.4 N typ. withdrawal
(polished steel gauge Ø 0.46 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 64-68.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 833-87-NNN-10-453101 for a double row version with 16 pins
becomes 833-87-016-10-453101.
831-PP-NNN-10-230101
Straight socket connector, height 4.2 mm, with clinched (right/left)
solder tails, single row
AVAIL ABILIT Y FROM
3 to 50 contacts
(standard number of contacts: 50)
833-PP-NNN-10-453101
Straight socket connector, height 8 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
833-PP-NNN-10-457101
Straight socket connector, height 10.4 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 50 contacts
(standard number of contacts: 50)
833-PP-NNN-10-287101
Straight socket connector, height 11.5 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
58
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 2 mm
SINGLE ROW / DOUBLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
"Hard metric" PCB socket connectors, solder tail, polarised.
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polymer LCP-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
Ø 0.40 to 0.66 mm,
0.50 mm
0.7 N typ. insertion
0.4 N typ. withdrawal
(polished steel gauge Ø 0.46 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 64-68.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 833-87-NNN-10-245101 for a double row version with 26 pins
becomes 833-87-026-10-245101.
831-PP-NNN-10-242101
Straight socket connector height 4.55 mm, solder tail, single row, polarised
AVAIL ABILIT Y FROM
22 contacts
Other pin number on request
833-PP-NNN-10-245101
Straight socket connector height 4.55 mm, solder tail, double row, polarised
AVAIL ABILIT Y FROM
26 and 44 contacts
Other pin number on request
Due to technical progress, all information provided is subject to change without prior notice.
59
PCB CONNECTORS
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
SOCKET CONNECTORS 2 mm
SINGLE ROW / DOUBLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
"Hard metric" PCB socket connectors right angle, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polymer LCP-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
Ø 0.40 to 0.66 mm,
0.50 mm
0.7 N typ. insertion
0.4 N typ. withdrawal
(polished steel gauge Ø 0.46 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 64-68.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 833-87-NNN-20-001101 for a double row version with 16 pins
becomes 833-87-016-20-001101.
831-PP-NNN-20-001101
Right angle socket connector, solder tail, single row
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
833-PP-NNN-20-001101
Right angle socket connector, solder tail, double row
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
60
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 2 mm
SINGLE ROW / DOUBLE ROW / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
"Hard metric" PCB socket connectors, SMD perpendicular mount.
DIELECTRIC STRENGTH
Black glass filled polymer LCP-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
Ø 0.40 to 0.56 mm,
0.50 mm
0.7 N typ. insertion
0.4 N typ. withdrawal
(polished steel gauge Ø 0.46 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.1 mm (measured on 25 mm long connectors)
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
For corresponding pin connectors, see pages 64-68.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 833-87-NNN-30-001101 for a double row version with 16 pins
becomes 833-87-016-30-001101.
831-PP-NNN-30-001101
SMD socket connector, single row, perpendicular mount
AVAIL ABILIT Y FROM
3 to 50 contacts
(standard number of contacts: 50)
For connectors having more than 12 contacts,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
833-PP-NNN-30-001101
SMD socket connector, double row, perpendicular mount
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
For connectors having more than 12 contacts per row,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
831-PP-NNN-30-242101
SMD socket connector, single row, perpendicular mount, polarised
AVAIL ABILIT Y
22 contacts
Other pin number on request
For connectors having more than 12 contacts,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
833-PP-NNN-30-245101
SMD socket connector, double row, perpendicular mount, polarised
AVAIL ABILIT Y FROM
26 and 44 contacts
Other pin number on request
For connectors having more than 12 contacts per row,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
Due to technical progress, all information provided is subject to change without prior notice.
61
PCB CONNECTORS
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
SOCKET CONNECTORS 2 mm
SINGLE ROW / QUAD ROW / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
"Hard metric" PCB socket connectors, SMD mount.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polymer LCP-GF30-FR
(PCT-GF30-FR for 837...30-291101)
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
Ø 0.40 to 0.66 mm,
0.50 mm
0.7 N typ. insertion
0.4 N typ. withdrawal
(polished steel gauge Ø 0.46 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.1 mm (measured on 25 mm long connectors)
Other plating on request (see page 178 for plating specs).
For corresponding pin connectors, see pages 64-68.
NNN number of poles. Replace NNN with the requested number of poles,
ORDERING INFORMATION ROHS COMPLIANT PARTS
e.g. 831-87-NNN-40-001101 for a single row version with 16 pins
PP PL ATING CODE
SLEEVE
CLIP
becomes 831-87-016-40-001101.
87
Tin
Flash gold
83
Tin
0.75 μm gold
837-83-NNN-30-291101
SMD socket connector, 4 row, perpendicular mount, floating pin
AVAIL ABILIT Y
72 and 200 contacts
Other pin number on request
831-PP-NNN-40-001101
SMD socket connector, single row, parallel mount
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
For connectors having more than 12 contacts,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
62
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 2 mm
SINGLE ROW / DOUBLE ROW / PRESS-FIT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
"Hard metric" PCB socket connectors, solderless press-fit mount.
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
PCB HOLE Ø
Black glass filled polymer LCP-GF30-FR
UL 94V-O
Bronze CuSn4Pb4Zn4 (C54400)
Beryllium copper (C17200)
Ø 0.40 to 0.66 mm,
0.50 mm
0.7 N typ. insertion
0.4 N typ. withdrawal
(polished steel gauge Ø 0.46 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
0.7 +0.07/-0.05 mm finished (0.8 ±0.025 mm drill)
For corresponding pin connectors, see pages 64-68.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 833-87-NNN-64-001101 for a double row version with 16 pins
becomes 833-87-016-64-001101.
831-PP-NNN-64-001101
Press-fit socket connector, single row, compliant pin
for PCB thickness 1.5 to 2 mm
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
833-PP-NNN-64-001101
Press-fit socket connector, double row, compliant pin
for PCB thickness 1.5 to 2 mm
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
831-PP-NNN-64-242101
Press-fit socket connector polarised, single row, compliant pin
for PCB thickness 1.5 to 2 mm
AVAIL ABILIT Y
22 contacts
Other pin number on request
833-PP-NNN-64-245101
Press-fit socket connector polarised, double row, compliant pin
for PCB thickness 1.5 to 2 mm
AVAIL ABILIT Y
26 and 44 contacts
Other pin number on request
Due to technical progress, all information provided is subject to change without prior notice.
63
PCB CONNECTORS
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
PIN CONNECTORS 2 mm
SINGLE ROW / DOUBLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
"Hard metric" PCB pin connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
Black glass filled polymer LCP-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.47 mm)
Min. 500 cycles
3A
Min. 1’000 VRMS
For corresponding socket connectors, see pages 57-63.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
10
0.25 μm gold
80
Tin
V3*
Tin
*only for 830/832...12-002101 series
CONNECTING PIN
0.25 μm gold
Tin
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 830-10-NNN-10-001101 for a single row version with 8 pins becomes
830-10-008-10-001101.
830-PP-NNN-10-001101
Straight pin connector, solder tail, single row
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
832-PP-NNN-10-001101
Straight pin connector, solder tail, double row
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
830-V3-NNN-12-002101
Straight pin connector, solder tail, single row, shrouded and polarised
AVAIL ABILIT Y
22 contacts
Other pin number on request
832-V3-NNN-12-002101
Straight pin connector, solder tail, double row, shrouded and polarised
AVAIL ABILIT Y
26 and 44 contacts
Other pin number on request
64
Due to technical progress, all information provided is subject to change without prior notice.
PIN CONNECTORS 2 mm
SINGLE ROW / DOUBLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
"Hard metric" PCB pin connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
Black glass filled polymer LCP-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.47 mm)
Min. 500 cycles
3A
Min. 1’000 VRMS
For corresponding socket connectors, see pages 57-63.
PP PL ATING CODE
TERMINATION
10
0.25 μm gold
80
Tin
V3*
Tin
*only for 830/832...22-002101 series
CONNECTING PIN
0.25 μm gold
Tin
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 830-10-NNN-20-001101 for a single row version with 8 pins becomes
830-10-008-20-001101.
830-PP-NNN-20-001101
Right angle pin connector, solder tail, single row
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
832-PP-NNN-20-001101
Right angle pin connector, solder tail, double row
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
830-V3-NNN-22-002101
Right angle pin connector, solder tail, single row, shrouded and polarised
AVAIL ABILIT Y
22 contacts
Other pin number on request
832-V3-NNN-22-002101
Right angle pin connector, solder tail, double row, shrouded and polarised
AVAIL ABILIT Y
26 and 44 contacts
Other pin number on request
Due to technical progress, all information provided is subject to change without prior notice.
65
PCB CONNECTORS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PIN CONNECTORS 2 mm
SINGLE ROW / DOUBLE ROW / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
"Hard metric" PCB pin connectors, SMD mount.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
DIELECTRIC STRENGTH
Black glass filled polymer LCP-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.47 mm
Min. 500 cycles
3A
Min. 1’000 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.1 mm (measured on 25 mm long connectors)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
For corresponding socket connectors, see pages 57-63.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
10
0.25 μm gold
80
Tin
V3*
Tin
*only for 830/832...32-002101 series
CONNECTING PIN
0.25 μm gold
Tin
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 830-10-NNN-30-001101 for a single row version with 8 pins becomes
830-10-008-30-001101.
830-PP-NNN-30-001101
SMD pin connector, single row, perpendicular mount
AVAIL ABILIT Y FROM
3 to 50 contacts
(standard number of contacts: 50)
For connectors having more than 12 contacts,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
832-PP-NNN-30-001101
SMD pin connector, double row, perpendicular mount
AVAIL ABILIT Y FROM
4 to 100 contacts
(Standard number of contacts: 100)
For connectors having more than 12 contacts per row,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
830-V3-NNN-32-002101
SMD pin connector, single row, perpendicular mount, shrouded and polarised
AVAIL ABILIT Y
22 contacts
Other pin number on request
For connectors having more than 12 contacts per row,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
832-V3-NNN-32-002101
SMD pin connector, double row, perpendicular mount, shrouded
and polarised
AVAIL ABILIT Y
26 and 44 contacts
Other pin number on request
For connectors having more than 12 contacts per row,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
66
Due to technical progress, all information provided is subject to change without prior notice.
PIN CONNECTORS 2 mm
SINGLE ROW / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
"Hard metric" PCB pin connectors, SMD mount.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
DIELECTRIC STRENGTH
Black glass filled polymer LCP-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.47 mm
Min. 500 cycles
3A
Min. 1’000 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.1 mm (measured on 25 mm long connectors)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
80
0.25 μm gold
Tin
0.25 μm gold
Tin
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 830-10-NNN-40-001101 for a single row version with 8 pins becomes
830-10-008-40-001101.
830-PP-NNN-40-001101
SMD pin connector, single row, parallel mount
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
For connectors having more than 12 contacts,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
Due to technical progress, all information provided is subject to change without prior notice.
67
PCB CONNECTORS
For corresponding socket connectors, see pages 57-63.
PIN CONNECTORS 2 mm
SQUARE PIN
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
0.5 mm / SINGLE ROW / DOUBLE ROW / SOLDER TAIL
[email protected]
Square pin headers, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
Black glass filled polyamide PA-GF30-FR
UL 94V-O
Brass
0.5 mm
Min. 100 cycles
1A
Min. 500 VRMS
For corresponding socket connectors, see pages 57-63.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
70
Flash gold
Flash gold
See page 178 for plating specs.
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 880-70-NNN-10-001101 for a single row version with 8 pins becomes
880-70-008-10-001101.
880-70-NNN-10-001101
Straight square pin header, solder tail, single row
AVAIL ABILIT Y FROM
2 to 40 contacts
(standard number of contacts: 40)
882-70-NNN-10-001101
Straight square pin header, solder tail, double row
AVAIL ABILIT Y FROM
4 to 80 contacts
(standard number of contacts: 80)
880-70-NNN-20-001101
Right angle square pin header, solder tail, single row
AVAIL ABILIT Y FROM
2 to 40 contacts
(standard number of contacts: 40)
882-70-NNN-20-001101
Right angle square pin header, solder tail, double row
AVAIL ABILIT Y FROM
4 to 80 contacts
(standard number of contacts: 80)
68
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.47 mm / SINGLE ROW / DOUBLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Ultralow and very low profile socket connectors, solder tail.
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.52 mm
3 N typ. insertion
1.5 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 500 cycles
1A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 101-108.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 415-83-2NN-41-001101 for a double row version with 16 pins
becomes 415-83-216-41-001101.
315-PP-1NN-41-003101
Straight socket connector ultralow profile, height 2.4 mm, solder tail, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
Please note: ultralow version not available as double row
315-PP-1NN-41-001101
Straight socket connector very low profile, height 3.14 mm, solder tail, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
415-PP-2NN-41-001101
Straight socket connector very low profile, height 3.14 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
Please note: ultralow version not available as double row
315-PP-1YY-01-881101
Straight socket connector very low profile, height 3.14 mm, partially
equipped 5.08 mm, solder tail, single row
AVAIL ABILIT Y FROM
2 to 32 contacts
YY number of poles:
please consult for ordering code
Due to technical progress, all information provided is subject to change without prior notice.
69
PCB CONNECTORS
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.47 mm / SINGLE ROW / DOUBLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connector strips, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see page 45.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 410-83-2NN-41-001101 for a double row version with 16 pins
becomes 410-83-216-41-001101.
310-PP-1NN-41-001101
Straight socket connector height 4.2 mm, solder tail, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
410-PP-2NN-41-001101
Straight socket connector height 4.2 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
310-PP-1YY-01-609101
Straight socket connector height 4.2 mm, solder tail, single row,
partially equipped 5.08 mm
AVAIL ABILIT Y FROM
2 to 32 contacts
YY number of poles:
please consult for ordering code
310-PP-1NN-01-666101
Straight socket connector height 4.2 mm, with clinched (right/left)
solder tails, single row
AVAIL ABILIT Y FROM
3 to 64 contacts
(standard number of contacts: 64)
70
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.47 mm / SINGLE ROW / DOUBLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors, long solder tail.
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 101-108.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 411-83-2NN-41-001101 for a double row version with 16 pins
becomes 411-83-216-41-001101.
311-PP-1NN-41-001101
Straight socket connector height 4.1 mm, long solder tail, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
411-PP-2NN-41-001101
Straight socket connector height 4.1 mm, long solder tail, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
Due to technical progress, all information provided is subject to change without prior notice.
71
PCB CONNECTORS
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.47 mm / SINGLE ROW / DOUBLE ROW / TRIPLE ROW
SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors, solder tail with standoff.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200))
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see page 45.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested nu.mber of poles,
e.g. 410-83-2NN-01-640101 for a double row version with 16 pins
becomes 410-83-216-01-640101.
310-PP-1NN-01-640101
Straight socket connector height 4.2 mm, solder tail, single row,
with standoff
AVAIL ABILIT Y FROM
2 to 32 contacts
(standard number of contacts: 32)
410-PP-2NN-01-640101
Straight socket connector height 4.2 mm, solder tail, double row,
with standoff
AVAIL ABILIT Y FROM
4 to 64 contacts
(standard number of contacts: 64)
410-PP-3NN-01-640101
Straight socket connector height 4.2 mm: solder tail, triple row,
with standoff
AVAIL ABILIT Y FROM
9 to 96 contacts
(standard number of contacts: 96)
310-PP-1NN-01-754101
Straight socket connector height 4.2 mm, with clinched (right/left)
solder tails, single row, with standoff
AVAIL ABILIT Y FROM
3 to 32 contacts
(standard number of contacts 32):
72
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.47 mm / DOUBLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.36 to 0.46 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
PCB CONNECTORS
INSUL ATOR
For corresponding pin connectors, see pages 101-108.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
805-PP-YYY-10-229101
Straight socket connector height 4.2 mm. solder tail, double row,
partially equipped 5.08 mm
AVAIL ABILIT Y FROM
4 to 32 contacts
YYY number of poles:
please consult for ordering code
Due to technical progress, all information provided is subject to change without prior notice.
73
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.47 mm / SINGLE ROW / DOUBLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Interconnect socket strips, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 101-108.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 416-83-2NN-41-007101 for a double row version with 16 pins
becomes 416-83-216-41-007101.
316-PP-1NN-41-XXX101
Interconnect socket strip, solder tail, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
416-PP-2NN-41-XXX101
Interconnect socket strip, solder tail, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
AVAILABLE CONTACT LENGTHS
74
CONTACT LENGTH
L1 (mm)
CONTACT DIAMETER
D1 (mm)
D2 (mm)
X X X CODE
L2 (mm)
6
7
8
9
10
11
12
13
15
18
22
33
4.2
4.2
4.2
4.85
4.2
4.2
4.2
4.2
4.2
4.2
4.2
4.2
1
1
1
1
1
0.85
1
1
1
1
1
1.18
006
018
003
012
007
002
008
009
001
011
004
013
0.51
0.51
0.51
0.46
0.51
0.51
0.51
0.51
0.51
0.51
0.51
0.51
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.47 mm / SINGLE ROW / DOUBLE ROW / TRIPLE ROW
SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors, solder tail.
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 101-108.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 803-83-NNN-10-132101 for a double row version with 16 pins
becomes 803-83-016-10-132101.
801-PP-NNN-10-132101
Straight socket connector height 7 mm, solder tail, single row
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
803-PP-NNN-10-132101
Straight socket connector height 7 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
805-PP-NNN-10-132101
Straight socket connector height 7 mm, solder tail, triple row
AVAIL ABILIT Y FROM
9 to 96 contacts
(standard number of contacts: 96)
801-PP-NNN-10-173101
Straight socket connector height 7 mm, with clinched (right/left)
solder tails, single row
AVAIL ABILIT Y FROM
3 to 50 contacts
(standard number of contacts: 50)
Due to technical progress, all information provided is subject to change without prior notice.
75
PCB CONNECTORS
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.47 mm / SINGLE ROW / DOUBLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Right angle socket connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 499-83-2NN-10-003101 for a double row version with 16 pins
becomes 499-83-216-10-003101.
399-PP-1NN-10-003101
Right angle socket connector, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
499-PP-2NN-10-003101
Right angle socket connector, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts 72):
76
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.47 mm / SINGLE ROW / DOUBLE ROW / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors, SMD perpendicular mount.
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.1 mm (measured on 25 mm long connectors)
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
For corresponding pin connectors, see pages 101-108.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 410-87-2NN-41-105101 for a double row version with 16 pins
becomes 410-87-216-41-105101.
314-PP-1NN-01-899101
SMD socket connector, low profile, single row, perpendicular mount
with self-levelling floating contacts
AVAIL ABILIT Y FROM
2 to 12 contacts
(standard number of contacts: 12)
For connectors having more than 9 contacts,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
414-PP-2NN-41-134101
SMD socket connector, low profile, double row, perpendicular mount
with self-levelling floating contacts
AVAIL ABILIT Y FROM
4 to 64 contacts
(standard number of contacts: 64)
For connectors having more than 9 contacts per row,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
310-PP-1NN-41-105101
SMD socket connector, single row, perpendicular mount
with gull-wing terminations
AVAIL ABILIT Y FROM
3 to 64 contacts
(standard number of contacts: 64)
For connectors having more than 9 contacts,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
410-PP-2NN-41-105101
SMD socket connector, double row, perpendicular mount
with gull-wing terminations
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
For connectors having more than 9 contacts per row,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
Due to technical progress, all information provided is subject to change without prior notice.
77
PCB CONNECTORS
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.47 mm / SINGLE ROW / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors, SMD parallel mount.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.1 mm (measured on 25 mm long connectors)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
For corresponding pin connectors, see pages 101-108.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 310-87-1NN-41-205101 for a single row version with 8 pins becomes
310-87-108-41-205101.
310-PP-1NN-41-205101
SMD socket connector, single row, parallel mount
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
For connectors having more than 9 contacts,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
78
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.47 mm / SINGLE ROW / DOUBLE ROW / PRESS-FIT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors, press-fit with compliant pin for solderless mount in PCB plated through holes.
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
PCB HOLE Ø
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Bronze CuSn4Pb4Zn4 (C54400)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
1 mm +0.09/-0.06 mm finished
(1.15 ±0.025 mm drill)
For corresponding pin connectors, see pages 101-108.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 346-83-1NN-41-036101 for a single row version with 8 pins becomes
346-83-108-41-036101.
346-PP-1NN-41-036101
Press-fit socket connector, single row, compliant pin
for PCB thickness 1.5 to 2.5 mm
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
446-PP-2NN-41-036101
Press-fit socket connector,double row, compliant pin
for PCB thickness 1.5 to 2.5 mm
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
346-PP-1NN-41-035101
Press-fit socket connector,single row, compliant pin
for PCB thickness 2.1 to 3.2 mm
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
446-PP-2NN-41-035101
Press-fit socket connector, double row, compliant pin
for PCB thickness 2.1 to 3.2 mm
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
Due to technical progress, all information provided is subject to change without prior notice.
79
PCB CONNECTORS
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.47 mm / SINGLE ROW / DOUBLE ROW / PRESS-FIT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors, press-fit with compliant pin for solderless mount in PCB plated through holes.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
PCB HOLE Ø
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Bronze CuSn4Pb4Zn4 (C54400)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
1 mm +0.09/-0.06 mm finished
(1.15 ±0.025 mm drill)
For corresponding pin connectors, see pages 101-108.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 801-87-NNN-65-410101 for a single row version with 8 pins becomes
801-87-008-65-410101.
801-PP-NNN-65-410101
Press-fit socket connector height 7 mm, single row, compliant pin
for PCB thickness 1.5 to 2.5 mm
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
803-PP-NNN-65-410101
Press-fit receptacle socket height 7 mm, double row, compliant pin
for PCB thickness 1.5 to 2.5 mm
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
80
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.47 mm / SINGLE ROW / DOUBLE ROW / WIRE-WRAP
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors with wire-wrap terminations.
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 101-108.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 422-83-2NN-41-001101 for a double row version with 16 pins
becomes 422-83-216-41-001101.
322-PP-1NN-41-001101
Wire-wrap socket connector height 4.9 mm, 2-level, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
422-PP-2NN-41-001101
Wire-wrap socket connector height 4.9 mm, 2-level, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
323-PP-1NN-41-001101
Wire-wrap socket connector height 4.9 mm, 3-level, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
423-PP-2NN-41-001101
Wire-wrap socket connector height 4.9 mm, 3-level, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
Due to technical progress, all information provided is subject to change without prior notice.
81
PCB CONNECTORS
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.47 mm / SINGLE ROW / DOUBLE ROW / WIRE-WRAP
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors with wire-wrap terminations and connecting pin for board stacking.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 101-108.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
83
Tin
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 426-83-2NN-41-001101 for a double row version with 16 pins
becomes 426-83-216-41-001101.
326-83-1NN-41-XXX101
Wire-wrap socket connector with connecting pin, height 4.9 mm, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
426-83-2NN-41-XXX101
Wire-wrap socket connector with connecting pin, height 4.9 mm, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
AVAILABLE CONTACT LENGTHS
82
CONTACT LENGTH L (mm)
WW-LEVEL
X X X CODE
5.9
8.9
11.9
1
2
3
001
002
003
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.47 mm / SINGLE ROW / CARRIER ASSEMBLIES
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
“Zero profile” socket connectors. Single socket contacts for solder mount into PCB, supplied on disposable carriers.
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (4 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.56 mm
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 101-108.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested nu.mber of poles,
e.g. 714-83-1NN-41-001101 for a single row version with 8 pins becomes
714-83-108-41-001101.
712-PP-1NN-41-001101
Single row carrier with standard socket contact with solder tail
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
Double row, disposable carrier strips on request
714-PP-1NN-41-001101
Single row carrier with low profile contact
for solder mount into PCB hole Ø 1.4-1.8 mm, PCB thickness 1 to 2.6 mm
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
Double row, disposable carrier strips on request
714-PP-1NN-41-014101
Single row carrier with low profile contact
for solder mount into PCB hole Ø 1.4-1.8 mm, PCB thickness 1 to 5 mm
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
Double row, disposable carrier strips on request
Due to technical progress, all information provided is subject to change without prior notice.
83
PCB CONNECTORS
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.47 mm / SINGLE ROW / CARRIER ASSEMBLIES
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
“Zero profile” socket connectors. Single socket contacts for solder and press-fit solderless mount into PCB, supplied on disposable carriers.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (3 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.40 to 0.52 mm
1 N typ. insertion
0.4 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 101-108.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 714-83-1NN-31-018101 for a single row version with 8 pins becomes
714-83-108-31-018101.
714-PP-1NN-31-012101
Single row carrier with ultra thin, low profile contact
or solder mount into PCB hole Ø 1-1.3 mm, PCB thickness 1 to 2.4 mm
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
Double row, disposable carrier strips on request
714-PP-1NN-31-018101
Single row carrier with ultra thin, low profile contact
for solder mount into PCB hole Ø 1-1.3 mm, PCB thickness 1 to 3.4 mm
AVAIL ABILIT Y FROM
to 64 contacts
(standard number of contacts: 64)
Double row, disposable carrier strips on request
714-PP-1NN-31-008101
Single row carrier with contacts for solderless press-fit mount into plated
trough PCB hole Ø 1.05 ±0.05 mm finished, PCB thickness 1.5 to 2.5 mm
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
Double row, disposable carrier strips on request
84
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.76 mm / SINGLE ROW / DOUBLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Very low profile socket connectors, solder tail.
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
Ø 0.70 to 0.90 mm,
0.635 mm
1.2 N typ. insertion
0.6 N typ. withdrawal
(polished steel gauge Ø 0.76 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 109-119.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 803-87-NNN-10-268101 for a double row version with 16 pins
becomes 803-87-016-10-268101.
801-PP-NNN-10-268101
Straight socket connector, very low profile, height 2.95 mm, solder tail,
single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
803-PP-NNN-10-268101
Straight socket connector, very low profile, height 2.95 mm, solder tail,
double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
Due to technical progress, all information provided is subject to change without prior notice.
85
PCB CONNECTORS
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.76 mm / SINGLE ROW / DOUBLE ROW / TRIPLE ROW
SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Very low profile socket connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
Ø 0.70 to 0.90 mm,
0.635 mm
1.2 N typ. insertion
0.6 N typ. withdrawal
(polished steel gauge Ø 0.76 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 109-119.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 803-87-NNN-10-012101 for a double row version with 16 pins
becomes 803-87-016-10-012101.
801-PP-NNN-10-012101
Straight socket connector, low profile, height 4.2 mm, solder tail, single row
AVAIL ABILIT Y FROM
2 to 32 contacts
(standard number of contacts: 32)
803-PP-NNN-10-012101
Straight socket connector, low profile, height 4.2 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 64 contacts
(standard number of contacts: 64)
805-PP-NNN-10-012101
Straight socket connector, low profile, height 4.2 mm, solder tail, triple row
AVAIL ABILIT Y FROM
9 to 96 contacts
(standard number of contacts: 96)
801-PP-YYY-10-458101
Straight socket connector, low profile, height 4.2 mm, solder tail, single row,
partially equipped 5.08 mm
AVAIL ABILIT Y FROM
2 to 16 contacts
YYY number of poles:
please consult for ordering code
86
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.76 mm / SINGLE ROW / DOUBLE ROW / TRIPLE ROW
SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors, solder tail.
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
Ø 0.70 to 0.90 mm,
0.635 mm
1.2 N typ. insertion
0.6 N typ. withdrawal
(polished steel gauge Ø 0.76 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 109-119.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 803-87-NNN-10-001101 for a double row version with 16 pins
becomes 803-87-016-10-001101.
801-PP-NNN-10-001101
Straight socket connector, height 7 mm, solder tail, single row
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
803-PP-NNN-10-001101
Straight socket connector, height 7 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
805-PP-NNN-10-001101
Straight socket connector, height 6.9 mm, solder tail, triple row
AVAIL ABILIT Y FROM
9 to 96 contacts
(standard number of contacts: 96)
Due to technical progress, all information provided is subject to change without prior notice.
87
PCB CONNECTORS
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.76 mm / SINGLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
Ø 0.70 to 0.90 mm,
0.635 mm
1.2 N typ. insertion
0.6 N typ. withdrawal
(polished steel gauge Ø 0.76 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 109-119.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 801-87-NNN-10-143101 for a double row version with 16 pins
becomes 801-87-016-10-143101.
801-PP-YYY-10-101101
Straight socket connector, height 7 mm, solder tail, single row,
partially equipped 5.08 mm
AVAIL ABILIT Y FROM
2 to 25 contacts
YYY number of poles:
please consult for ordering code
801-PP-NNN-10-143101
Straight socket connector, height 7 mm with clinched (right/left) solder tail,
single row
AVAIL ABILIT Y FROM
3 to 50 contacts
(standard number of contacts: 50)
88
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.76 mm / SINGLE ROW / DOUBLE ROW / TRIPLE ROW
SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors, solder tail.
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
Ø 0.70 to 0.90 mm,
0.635 mm
1.2 N typ. insertion
0.6 N typ. withdrawal
(polished steel gauge Ø 0.76 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 109-119.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 803-87-NNN-10-003101 for a double row version with 16 pins
becomes 803-87-016-10-003101.
801-PP-NNN-10-003101
Straight socket connector, height 8 mm, solder tail, single row
AVAIL ABILIT Y FROM
2 to 36 contacts
(standard number of contacts: 36)
803-PP-NNN-10-003101
Straight socket connector, height 7.9 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
805-PP-NNN-10-003101
Straight socket connector, height 7.9 mm, solder tail, triple row
AVAIL ABILIT Y FROM
9 to 96 contacts
(standard number of contacts: 96)
Due to technical progress, all information provided is subject to change without prior notice.
89
PCB CONNECTORS
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.76 mm / SINGLE ROW / DOUBLE ROW / TRIPLE ROW
SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
Ø 0.70 to 0.90 mm,
0.635 mm
1.2 N typ. insertion
0.6 N typ. withdrawal
(polished steel gauge Ø 0.76 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 109-119.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 803-87-NNN-10-005101 for a double row version with 16 pins
becomes 803-87-016-10-005101.
801-PP-NNN-10-005101
Straight socket connector, height 8.5 mm, solder tail, single row
AVAIL ABILIT Y FROM
2 to 36 contacts
(standard number of contacts: 36)
803-PP-NNN-10-005101
Straight socket connector, height 8.5 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
805-PP-NNN-10-005101
Straight socket connector, height 8.4 mm, solder tail, triple row
AVAIL ABILIT Y FROM
9 to 96 contacts
(standard number of contacts: 96)
803-PP-NNN-10-269101
Straight socket connector, height 11 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
90
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.76 mm / SINGLE ROW / DOUBLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors, solder tail.
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
Ø 0.70 to 0.90 mm,
0.635 mm
1.2 N typ. insertion
0.6 N typ. withdrawal
(polished steel gauge Ø 0.76 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 109-119.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 803-87-NNN-10-216101 for a double row version with 16 pins
becomes 803-87-016-10-216101.
803-PP-NNN-10-249101
Straight socket connector, height 19.7 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 40 contacts
(standard number of contacts: 40)
801-PP-NNN-10-216101
Straight socket connector, height 37.5 mm, solder tail, single row
AVAIL ABILIT Y FROM
2 to 32 contacts
(standard number of contacts: 32)
803-PP-NNN-10-216101
Straight socket connector, height 37.5 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
Due to technical progress, all information provided is subject to change without prior notice.
91
PCB CONNECTORS
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.76 mm / SINGLE ROW / DOUBLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Right angle socket connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
Ø 0.70 to 0.90 mm,
0.635 mm
1.2 N typ. insertion
0.6 N typ. withdrawal
(polished steel gauge Ø 0.76 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 109-119.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 803-87-NNN-20-001101 for a double row version with 16 pins
becomes 803-87-016-20-001101.
801-PP-NNN-20-002101
Right angle short socket connector, solder tail, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
Option: right angle short receptacle, solder tail,
double row available on request
801-PP-YYY-20-442101
Right angle short socket connector, solder tail, single row, partially
equipped 5.08 mm
AVAIL ABILIT Y FROM
2 to 32 contacts
YYY number of poles:
please consult for ordering code
801-PP-NNN-20-001101
Right angle socket connector, solder tail, single row
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
803-PP-NNN-20-001101
Right angle socket connector, solder tail, double row
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
92
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.76 mm / SINGLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Right angle socket connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
Ø 0.70 to 0.90 mm,
0.635 mm
1.2 N typ. insertion
0.6 N typ. withdrawal
(polished steel gauge Ø 0.76 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
PCB CONNECTORS
INSUL ATOR
For corresponding pin connectors, see pages 109-119.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
801-PP-YYY-20-101101
Right angle socket connector, solder tail, single row, partially
equipped 5.08 mm
AVAIL ABILIT Y FROM
2 to 25 contacts
YYY number of poles:
please consult for ordering code
Due to technical progress, all information provided is subject to change without prior notice.
93
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.76 mm / SINGLE ROW / DOUBLE ROW / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors, SMD perpendicular mount.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
Ø 0.70 to 0.90 mm,
0.635 mm
1.2 N typ. insertion
0.6 N typ. withdrawal
(polished steel gauge Ø 0.76 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.1 mm (measured on 25 mm long connectors)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
For corresponding pin connectors, see pages 109-119.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 803-87-NNN-30-002101 for a double row version with 16 pins
becomes 803-87-016-30-002101.
801-PP-NNN-30-480101
SMD socket connector, single row, perpendicular mount with self-levelling
floating contacts
AVAIL ABILIT Y FROM
2 to 12 contacts
(standard number of contacts: 12)
For connectors having more than 9 contacts,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
803-PP-NNN-30-480101
SMD socket connector, double row, perpendicular mount with self-levelling
floating contacts
AVAIL ABILIT Y FROM
4 to 64 contacts
(standard number of contacts: 64)
For connectors having more than 9 contacts per row,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
801-PP-NNN-30-002101
SMD socket connector, single row, perpendicular mount with gull-wing
terminations
AVAIL ABILIT Y FROM
3 to 64 contacts
(standard number of contacts: 64)
For connectors having more than 9 contacts,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
803-PP-NNN-30-002101
SMD socket connector, double row, perpendicular mount with gull-wing
terminations
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 40 and 72)
For connectors having more than 9 contacts per row,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
94
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.76 mm / SINGLE ROW / DOUBLE ROW / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors, SMD perpendicular mount.
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
Ø 0.70 to 0.90 mm,
0.635 mm
1.2 N typ. insertion
0.6 N typ. withdrawal
(polished steel gauge Ø 0.76 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.1 mm (measured on 25 mm long connectors)
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
For corresponding pin connectors, see pages 109-119.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 803-87-NNN-30-001101 for a double row version with 16 pins
becomes 803-87-016-30-001101.
801-PP-NNN-30-001101
SMD socket connector, single row, perpendicular mount with gull-wing
terminations
AVAIL ABILIT Y FROM
3 to 50 contacts
(standard number of contacts: 50)
For connectors having more than 9 contacts,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
803-PP-NNN-30-001101
SMD socket connector, double row, perpendicular mount with gull-wing
terminations
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
For connectors having more than 9 contacts per row,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
Due to technical progress, all information provided is subject to change without prior notice.
95
PCB CONNECTORS
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.76 mm / SINGLE ROW / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors, SMD parallel mount.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
Ø 0.70 to 0.90 mm,
0.635 mm
1.2 N typ. insertion
0.6 N typ. withdrawal
(polished steel gauge Ø 0.76 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.1 mm (measured on 25 mm long connectors)
For corresponding pin connectors, see pages 109-119.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
78, 87
Tin
Gold flash
38, 83
Tin
Gold 0.75 μm
Code 78, 38 for 8FM...02-146 series / 87, 83 for 801...40-00X101 series
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 801-87-NNN-40-002101 for a single row version with 8 pins becomes
801-87-008-40-002101.
8FM-PP-0NNN-02-146
SMD socket connector, parallel mount, low profile minimum PCB space
requirement, single row
AVAIL ABILIT Y FROM
2 to 10 contacts
(standard number of contacts: 10)
For connectors having more than 9 contacts,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
801-PP-NNN-40-002101
SMD socket connector, parallel mount, short contact, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
For connectors having more than 9 contacts,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
801-PP-NNN-40-001101
SMD socket connector, parallel mount, long contact, single row
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
For connectors having more than 9 contacts,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
96
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.76 mm / SINGLE ROW / DOUBLE ROW / PRESS-FIT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors, press-fit with compliant pin for solderless mount in PCB plated through holes.
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
PCB HOLE Ø
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Bronze CuSn4Pb4Zn4 (C54400)
Beryllium copper (C17200)
Ø 0.70 to 0.90 mm,
0.635 mm
1.2 N typ. insertion
0.6 N typ. withdrawal
(polished steel gauge Ø 0.76 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
1 mm +0.09/-0.06 mm finished
(1.15 ±0.025 mm drill)
For corresponding pin connectors, see pages 109-119.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 801-87-NNN-65-001101 for a single row version with 8 pins becomes
801-87-008-65-001101.
801-PP-NNN-65-001101
Press-fit socket connector, single row, compliant pin for PCB thickness
1.5 to 2.5 mm
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
803-PP-NNN-65-001101
Press-fit socket connector, double row, compliant pin for PCB thickness
1.5 to 2.5 mm
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
801-PP-NNN-66-001101
Press-fit socket connector, single row, compliant pin for PCB thickness
2.1 to 3.2 mm
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
803-PP-NNN-66-001101
Press-fit socket connector, double row, compliant pin for PCB thickness
2.1 to 3.2 mm
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
Due to technical progress, all information provided is subject to change without prior notice.
97
PCB CONNECTORS
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.76 mm / SINGLE ROW / DOUBLE ROW / PRESS-FIT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Receptacle connectors, press-fit with compliant pin for solderless mount in PCB plated through holes and connecting pin for board stacking.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
PCB HOLE Ø
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Bronze CuSn4Pb4Zn4 (C54400)
Beryllium copper (C17200)
Ø 0.70 to 0.90 mm,
0.635 mm
1.2 N typ. insertion
0.6 N typ. withdrawal
(polished steel gauge Ø 0.76 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
1 mm +0.09/-0.06 mm finished
(1.15 ±0.025 mm drill)
For corresponding pin connectors, see pages 109-119.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 801-87-NNN-65-461101 for a double row version with 16 pins
becomes 801-87-016-65-461101.
801-PP-NNN-65-461101
Press-fit receptacle connector, single row, compliant pin for PCB thickness
1.5 to 2.5 mm
AVAIL ABILIT Y FROM
2 to 36 contacts
(standard number of contacts: 36)
803-PP-NNN-65-461101
Press-fit receptacle connector, double row, compliant pin for PCB thickness
1.5 to 2.5 mm
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
98
Due to technical progress, all information provided is subject to change without prior notice.
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 0.76 mm / SINGLE ROW / DOUBLE ROW / WIRE-WRAP
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors.
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PINS
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
Ø 0.70 to 0.90 mm,
0.635 mm
1.2 N typ. insertion
0.6 N typ. withdrawal
(polished steel gauge Ø 0.76 mm)
Min. 500 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see pages 109-119.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 803-87-NNN-53-001101 for a double row version with 16 pins
becomes 803-87-016-53-001101.
801-PP-NNN-53-001101
Wire-wrap socket connector, height 7 mm, 3-level, single row
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
803-PP-NNN-53-001101
Wire-wrap socket connector, height 7 mm, 3-level, double row
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
Due to technical progress, all information provided is subject to change without prior notice.
99
PCB CONNECTORS
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
SOCKET CONNECTORS 2.54 mm
MATING PIN Ø 1 mm / SINGLE ROW / DOUBLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Socket connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
SLEEVE
CONTACT CLIP (6 FINGER)
MATING PIN Ø
FORCES
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
Beryllium copper (C17200)
0.95 to 1.08 mm
1.2 N typ. insertion
0.6 N typ. withdrawal
(polished steel gauge Ø 1 mm)
Min. 100 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding pin connectors, see page 113.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
SLEEVE
CLIP
87
83
Tin
Tin
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 803-87-NNN-10-004101 for a double row version with 16 pins
becomes 803-87-016-10-004101.
801-PP-NNN-10-004101
Straight socket connector, height 7 mm, solder tail, single row
AVAIL ABILIT Y FROM
2 to 50 contacts
(standard number of contacts: 50)
803-PP-NNN-10-004101
Straight socket connector, height 7 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 100 contacts
(standard number of contacts: 100)
100
Due to technical progress, all information provided is subject to change without prior notice.
PIN CONNECTORS 2.54 mm
CONNECTING PIN Ø 0.47 mm / SINGLE ROW / DOUBLE ROW
SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Pin connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.47 mm
Min. 500 cycles
3A
Min. 1’000 VRMS
For corresponding socket connectors, see pages 69-84.
PP PL ATING CODE
TERMINATION
10
0.25 μm gold
80
Tin
V3*
Tin
*only for 350/450...00-006101 series
CONNECTING PIN
0.25 μm gold
Tin
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 450-10-2NN-00-006101 for a double row version with 16 pins
becomes 450-10-216-00-006101.
350-PP-1NN-00-019101
Straight pin connector ultralow profile, height 1.9 mm, solder tail, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
350-PP-1NN-00-024101
Straight pin connector ultralow profile, height 2.2 mm, solder tail, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
350-PP-1NN-00-006101
Straight pin connector low profile, height 3.5 mm, solder tail, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
450-PP-2NN-00-006101
Straight pin connector low profile, height 3.5 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
Due to technical progress, all information provided is subject to change without prior notice.
101
PCB CONNECTORS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PIN CONNECTORS 2.54 mm
CONNECTING PIN Ø 0.47 mm / SINGLE ROW / DOUBLE ROW
SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Pin connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.47 mm
Min. 500 cycles
3A
Min. 1’000 VRMS
For corresponding socket connectors, see pages 69-84.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
80
0.25 μm gold
Tin
0.25 μm gold
Tin
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 350-10-1NN-00-001101 for a single row version with 8 pins becomes
350-10-108-00-001101.
350-PP-1NN-01-666101
Straight pin connector, height 3.5 mm, with clinched (right/left) solder tails,
single row
AVAIL ABILIT Y FROM
3 to 64 contacts
(standard number of contacts: 64)
350-PP-1YY-01-714101
Straight pin connector, height 3.5 mm, solder tail, single row, partially
equipped 5.08 mm
AVAIL ABILIT Y FROM
2 to 32 contacts
YY number of poles:
please consult for ordering code
350-PP-1NN-00-001101
Straight pin connector, height 4 mm, solder tail, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
450-PP-2NN-00-001101
Straight pin connector, height 4 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
102
Due to technical progress, all information provided is subject to change without prior notice.
PIN CONNECTORS 2.54 mm
CONNECTING PIN Ø 0.47 mm / SINGLE ROW / DOUBLE ROW
SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Pin connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.47 mm
Min. 500 cycles
3A
Min. 1’000 VRMS
For corresponding socket connectors, see pages 69-84.
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
80
0.25 μm gold
Tin
0.25 μm gold
Tin
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 450-10-2NN-00-013101 for a double row version with 16 pins
becomes 450-10-216-00-013101.
350-PP-1YY-01-609101
Straight pin connector, low profile, height 4 mm, solder tail, single row,
partially equipped 5.08 mm
AVAIL ABILIT Y FROM
2 to 32 contacts
YY number of poles:
please consult for ordering code
350-PP-1NN-00-013101
Straight pin connector, height 4.1 mm, solder tail, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
450-PP-2NN-00-013101
Straight pin connector, height 4.1 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
Due to technical progress, all information provided is subject to change without prior notice.
103
PCB CONNECTORS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PIN CONNECTORS 2.54 mm
CONNECTING PIN Ø 0.47 mm / SINGLE ROW / DOUBLE ROW
SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Pin interconnect connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.47 mm
Min. 500 cycles
3A
Min. 1’000 VRMS
For corresponding socket connectors, see pages 69-80.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
80
0.25 μm gold
Tin
0.25 μm gold
Tin
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 451-10-2NN-00-003101 for a double row version with 8 pins becomes
451-10-208-00-003101.
351-PP-1NN-00-XXX101
Straight interconnect pin connector, solder tail, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
451-PP-2NN-00-XXX101
Straight interconnect pin connector, solder tail, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
AVAILABLE CONTACT LENGTHS
CONTACT LENGTH
L1 (mm)
L2 (mm)
X X X CODE
6.2
8.4
15.3
21.2
27.4
4.7
3.55
3.55
3.55
3.55
003
004
005
016
017
Other lengths on request
104
Due to technical progress, all information provided is subject to change without prior notice.
PIN CONNECTORS 2.54 mm
CONNECTING PIN Ø 0.47 mm / SINGLE ROW / DOUBLE ROW
SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Right angle pin connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.47 mm
Min. 500 cycles
3A
Min. 1’000 VRMS
For corresponding socket connectors, see pages 69-84.
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
80
V3
0.25 μm gold
Tin
Tin
0.25 μm gold
Tin
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 499-10-2NN-10-009101 for a double row version with 8 pins becomes
499-10-208-10-009101.
399-PP-1NN-10-009101
Right angle pin connector, solder tail, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
499-PP-2NN-10-009101
Right angle pin connector, solder tail, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
Due to technical progress, all information provided is subject to change without prior notice.
105
PCB CONNECTORS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PIN CONNECTORS 2.54 mm
CONNECTING PIN Ø 0.47 mm / SINGLE ROW / DOUBLE ROW
SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Pin connectors, SMD.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.47 mm
Min. 500 cycles
3A
Min. 1’000 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.1 mm (measured on 25 mm long connectors)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
For corresponding socket connectors, see pages 69-84.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
10
0.25 μm gold
80
Tin
V3*
Tin
*only for 350/450...00-106101 series
CONNECTING PIN
0.25 μm gold
Tin
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 350-10-1NN-00-106101 for a single row version with 8 pins becomes
350-10-108-00-106101.
350-PP-1NN-01-899101
SMD pin connector, low profile, single row, perpendicular mount with
self-levelling floating contacts
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
For connectors having more than 9 contacts,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
450-PP-2NN-01-899101
SMD pin connector, low profile, double row, perpendicular mount with
self-levelling floating contacts
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
For connectors having more than 9 contacts per row,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
350-PP-1NN-00-106101
SMD pin connector, single row, perpendicular mount with gull-wing
terminations
AVAIL ABILIT Y FROM
3 to 64 contacts
(standard number of contacts: 64)
For connectors having more than 9 contacts,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
450-PP-2NN-00-106101
SMD pin connector, double row, perpendicular mount with gull-wing
terminations
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
For connectors having more than 9 contacts per row,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
106
Due to technical progress, all information provided is subject to change without prior notice.
PIN CONNECTORS 2.54 mm
CONNECTING PIN Ø 0.47 mm / SINGLE ROW / SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Pin connectors, SMD.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.47 mm
Min. 500 cycles
3A
Min. 1’000 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.1 mm (measured on 25 mm long connectors)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
80
0.25 μm gold
Tin
0.25 μm gold
Tin
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 350-10-1NN-00-206101 for a single row version with 8 pins becomes
350-10-108-00-206101.
350-PP-1NN-00-206101
SMD pin connector, single row, parallel mount
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
For connectors having more than 9 contacts,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
Due to technical progress, all information provided is subject to change without prior notice.
107
PCB CONNECTORS
For corresponding socket connectors, see pages 69-84.
PIN CONNECTORS 2.54 mm
CONNECTING PIN Ø 0.47 mm / SINGLE ROW / DOUBLE ROW / PRESS-FIT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Pin connectors, press-fit with compliant pin for solderless mount in PCB plated through holes.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
PCB HOLE Ø
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Bronze CuSn4Pb4Zn4 (C54400)
0.47 mm
Min. 500 cycles
3A
Min. 1’000 VRMS
1 mm +0.09/-0.06 mm finished
(1.15 ±0.025 mm drill)
For corresponding socket connectors, see pages 69-84.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
V3
Tin
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 356-V3-1NN-00-014101 for a single row version with 8 pins becomes
356-V3-108-00-014101.
356-V3-1NN-00-014101
Press-fit pin connector, single row, compliant pin for PCB thickness
1.5 to 2.5 mm
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
456-V3-2NN-00-014101
Press-fit pin connector, double row, compliant pin for PCB thickness
1.5 to 2.5 mm
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
108
Due to technical progress, all information provided is subject to change without prior notice.
PIN CONNECTORS 2.54 mm
CONNECTING PIN Ø 0.76 mm / SINGLE ROW / DOUBLE ROW
SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Pin connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.76 mm
Min. 500 cycles
3A
Min. 1’000 VRMS
For corresponding socket connectors, see pages 85-99.
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
80
0.25 μm gold
Tin
0.25 μm gold
Tin
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 800-10-NNN-10-001101 for a single row version with 8 pins becomes
800-10-008-10-001101.
800-PP-NNN-10-002101
Straight pin connector, height 3.2 mm, short pin, solder tail, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
802-PP-NNN-10-002101
Straight pin connector, height 3.2 mm, short pin, solder tail, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
800-PP-NNN-10-001101
Straight pin connector, height 3.2 mm, long pin, solder tail, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
Option: partially equipped 5.08 mm connector
PN 800-PP-YYY-10-101001 available on request
802-PP-NNN-10-001101
Straight pin connector, height 3.2 mm, long pin, solder tail, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
Due to technical progress, all information provided is subject to change without prior notice.
109
PCB CONNECTORS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PIN CONNECTORS 2.54 mm
CONNECTING PIN Ø 0.76 mm / SINGLE ROW / DOUBLE ROW / TRIPLE ROW
SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Pin connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.76 mm
Min. 500 cycles
3A
Min. 1’000 VRMS
For corresponding socket connectors, see pages 85-99.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
10
0.25 μm gold
80
Tin
V3*
Tin
*only for 802/804...10-193101 series
CONNECTING PIN
0.25 μm gold
Tin
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 802-10-NNN-10-193101 for a double row version with 16 pins
becomes 802-10-016-10-193101.
350-PP-1NN-00-018101
Straight pin connector, height 4.75 mm, solder tail, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
450-PP-2NN-00-018101
Straight pin connector, height 4.75 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
802-V3-NNN-10-193101
Straight pin connector, height 21.2 mm, solder tail, double row
AVAIL ABILIT Y FROM
4 to 64 contacts
(standard number of contacts: 64)
804-V3-NNN-10-193101
Straight pin connector, height 21.2 mm, solder tail, triple row
AVAIL ABILIT Y FROM
9 to 96 contacts
(standard number of contacts: 96)
110
Due to technical progress, all information provided is subject to change without prior notice.
PIN CONNECTORS 2.54 mm
CONNECTING PIN Ø 0.76 mm / SINGLE ROW / DOUBLE ROW / TRIPLE ROW
SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Shrouded pin connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.76 mm
Min. 500 cycles
3A
Min. 1’000 VRMS
For corresponding socket connectors, see pages 85-99.
PP PL ATING CODE
TERMINATION
CONNECTING PIN
V3
Tin
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 800-V3-NNN-12-002101 for a single row version with 8 pins becomes
800-V3-008-12-002101.
800-V3-NNN-12-002101
Straight shrouded pin connector, solder tail, single row
AVAIL ABILIT Y FROM
2 to 32 contacts
(standard number of contacts: 32)
802-V3-NNN-12-002101
Straight shrouded pin connector, solder tail, double row
AVAIL ABILIT Y FROM
4 to 64 contacts
(standard number of contacts: 64)
804-V3-NNN-12-002101
Straight shrouded pin connector, solder tail, triple row
AVAIL ABILIT Y FROM
9 to 96 contacts
(standard number of contacts: 96)
800-V3-YYY-12-422101
Straight shrouded pin connector, solder tail, single row, partially
equipped 5.08 mm
AVAIL ABILIT Y FROM
2 to 16 contacts
YYY number of poles:
please consult for ordering code
Due to technical progress, all information provided is subject to change without prior notice.
111
PCB CONNECTORS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PIN CONNECTORS 2.54 mm
CONNECTING PIN Ø 0.76 mm / SINGLE ROW / DOUBLE ROW
SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Right angle pin connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.76 mm
Min. 500 cycles
3A
Min. 1’000 VRMS
For corresponding socket connectors, see pages 85-99.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
80
V3
0.25 μm gold
Tin
Tin
0.25 μm gold
Tin
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 800-10-NNN-20-001101 for a single row version with 8 pins becomes
800-10-008-20-001101.
800-PP-NNN-20-001101
Right angle pin connector, solder tail, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
802-PP-NNN-20-001101
Right angle pin connector, solder tail, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
800-PP-YYY-20-101101
Right angle pin connector, solder tail, single row, partially
equipped 5.08 mm
AVAIL ABILIT Y FROM
2 to 32 contacts
YYY number of poles:
please consult for ordering code
112
Due to technical progress, all information provided is subject to change without prior notice.
PIN CONNECTORS 2.54 mm
CONNECTING PIN Ø 0.76 / 1 mm / SINGLE ROW / DOUBLE ROW
TRIPLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Right angle pin connectors, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.76 mm / 1 mm
Min. 500 cycles
3A
Min. 1’000 VRMS
For corresponding socket connectors, see pages 85-100.
PP PL ATING CODE
TERMINATION
10*
0.25 μm gold
80*
Tin
V3
Tin
*only for 800...-20-004101 series
CONNECTING PIN
0.25 μm gold
Tin
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 800-V3-NNN-22-002101 for a single row version with 8 pins becomes
800-V3-008-22-002101.
800-V3-NNN-22-002101
Right angle shrouded pin connector, solder tail, single row
AVAIL ABILIT Y FROM
2 to 32 contacts
(standard number of contacts: 32)
802-V3-NNN-22-002101
Right angle shrouded pin connector, solder tail, double row
AVAIL ABILIT Y FROM
4 to 64 contacts
(standard number of contacts: 64)
804-V3-NNN-22-002101
Right angle shrouded pin connector, solder tail, triple row
AVAIL ABILIT Y FROM
9 to 96 contacts
(standard number of contacts: 96)
800-PP-NNN-20-004101
Right angle pin connector Ø 1 mm, solder tail, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
Due to technical progress, all information provided is subject to change without prior notice.
113
PCB CONNECTORS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PIN CONNECTORS 2.54 mm
CONNECTING PIN Ø 0.76 mm / SINGLE ROW / DOUBLE ROW
SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Pin connectors, SMD.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.76 mm
Min. 500 cycles
3A
Min. 1’000 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.1 mm (measured on 25 mm long connectors)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
For corresponding socket connectors, see pages 85-99.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
10
0.25 μm gold
80
Tin
V3*
Tin
*only for 800/802...30-001101 series
CONNECTING PIN
0.25 μm gold
Tin
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 800-10-NNN-30-001101 for a single row version with 8 pins becomes
800-10-008-30-001101.
800-PP-NNN-30-480101
SMD pin connector, low profile, single row, perpendicular mount with
self-levelling floating contacts
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
For connectors having more than 9 contacts,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
802-PP-NNN-30-480101
SMD pin connector, low profile, double row, perpendicular mount with
self-levelling floating contacts
AVAIL ABILIT Y FROM
4 to 64 contacts
(standard number of contacts: 64)
For connectors having more than 9 contacts per row,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
800-PP-NNN-30-001101
SMD pin connector, single row, perpendicular mount with gull-wing
terminations
AVAIL ABILIT Y FROM
3 to 64 contacts
(standard number of contacts: 64)
For connectors having more than 9 contacts,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
802-PP-NNN-30-001101
SMD pin connector, double row, perpendicular mount with gull-wing
terminations
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
For connectors having more than 9 contacts per row,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
114
Due to technical progress, all information provided is subject to change without prior notice.
PIN CONNECTORS 2.54 mm
CONNECTING PIN Ø 0.76 mm / SINGLE ROW / DOUBLE ROW
SURFACE MOUNT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Pin connectors, SMD.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.76 mm
Min. 500 cycles
3A
Min. 1’000 VRMS
COPL ANARIT Y
SMD TERMINATIONS
Max. 0.1 mm (measured on 25 mm long connectors)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
10*
0.25 μm gold
80*
Tin
V3
Tin
*only for 800...40-001101 series
CONNECTING PIN
0.25 μm gold
Tin
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 800-V3-NNN-32-002101 for a single row version with 8 pins becomes
800-V3-008-32-002101.
800-V3-NNN-32-002101
SMD shrouded pin connector, single row, perpendicular mount
with gull-wing terminations
AVAIL ABILIT Y FROM
3 to 32 contacts
(standard number of contacts: 32)
For connectors having more than 9 contacts,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
802-V3-NNN-32-002101
SMD shrouded pin connector, double row, perpendicular mount
with gull-wing terminations
AVAIL ABILIT Y FROM
4 to 64 contacts
(standard number of contacts: 64)
For connectors having more than 9 contacts per row,
See
the coplanarity issue is to be addressed specifically
page 43
T & R Packaging
800-PP-NNN-40-001101
SMD pin connector, single row, parallel mount
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
For connectors having more than 9 contacts,
the coplanarity issue is to be addressed specifically
See
page 43
T & R Packaging
Due to technical progress, all information provided is subject to change without prior notice.
115
PCB CONNECTORS
For corresponding socket connectors, see pages 85-99.
PIN CONNECTORS 2.54 mm
CONNECTING PIN Ø 0.76 mm / SINGLE ROW / DOUBLE ROW / PRESS-FIT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Pin connectors, press-fit with compliant pin for solderless mount in PCB plated through holes.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
PCB HOLE Ø
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Bronze CuSn4Pb4Zn4 (C54400)
0.76 mm
Min. 500 cycles
3A
Min. 1’000 VRMS
1 mm +0.09/-0.06 mm finished
(1.15 ±0.025 mm drill)
For corresponding socket connectors, see pages 85-99.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
80
0.25 μm gold
Tin
0.25 μm gold
Tin
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 800-10-NNN-65-001101 for a single row version with 8 pins becomes
800-10-008-65-001101.
800-PP-NNN-65-001101
Press-fit pin connector, single row, compliant pin for PCB thickness
1.5 to 2.5 mm
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
802-PP-NNN-65-001101
Press-fit pin connector, double row, compliant pin for PCB thickness
1.5 to 2.5 mm
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
800-PP-NNN-66-001101
Press-fit pin connector, single row, compliant pin for PCB thickness
2.1 to 3.2 mm
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
802-PP-NNN-66-001101
Press-fit pin connector, double row, compliant pin for PCB thickness
2.1 to 3.2 mm
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
116
Due to technical progress, all information provided is subject to change without prior notice.
PIN CONNECTORS 2.54 mm
CONNECTING PIN Ø 0.76 mm / SINGLE ROW / DOUBLE ROW / TRIPLE ROW
PRESS-FIT
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Pin connectors, press-fit with compliant pin for solderless mount in PCB plated through holes.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
PCB HOLE Ø
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Bronze CuSn4Pb4Zn4 (C54400)
0.76 mm
Min. 500 cycles
3A
Min. 1’000 VRMS
1 mm +0.09/-0.06 mm finished
(1.15 ±0.025 mm drill)
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
V3
Tin
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 800-V3-NNN-6B-002101 for a single row version with 8 pins becomes
800-V3-008-6B-002101.
800-V3-NNN-6B-002101
Press-fit shrouded pin connector, single row, compliant pin for PCB
thickness 1.5 to 2.5 mm
AVAIL ABILIT Y FROM
2 to 32 contacts
(standard number of contacts: 32)
802-V3-NNN-6B-002101
Press-fit shrouded pin connector, double row, compliant pin for PCB
thickness 1.5 to 2.5 mm
AVAIL ABILIT Y FROM
4 to 64 contacts
(standard number of contacts: 64)
804-V3-NNN-6B-002101
Press-fit shrouded pin connector, triple row, compliant pin for PCB
thickness 1.5 to 2.5 mm
AVAIL ABILIT Y FROM
9 to 96 contacts
(standard number of contacts: 96)
Due to technical progress, all information provided is subject to change without prior notice.
117
PCB CONNECTORS
For corresponding socket connectors, see pages 85-99.
PIN CONNECTORS 2.54 mm
SQUARE PIN
SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
0.635 mm / SINGLE ROW / DOUBLE ROW / TRIPLE ROW
[email protected]
Square pin headers, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
Black glass filled polyamide PA-GF30-FR
UL 94V-O
Brass
0.635 mm
Min. 100 cycles
3A
Min. 1’000 VRMS
For corresponding socket connectors, see pages 85-99.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
70
80
18
Flash gold
Tin
Tin
Flash gold
Tin
0.25 μm gold
See page 178 for plating specs.
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 890-70-NNN-10-001101 for a single row version with 8 pins becomes
890-70-008-10-001101.
890-PP-NNN-10-XXX101
Straight square pin header, solder tail, single row
AVAIL ABILIT Y FROM
2 to 40 contacts
(standard number of contacts: 40)
892-PP-NNN-10-XXX101
Straight square pin header, solder tail, double row
AVAIL ABILIT Y FROM
4 to 80 contacts
(standard number of contacts: 80)
894-PP-NNN-10-001101
Straight square pin header, solder tail, triple row
Only contact length code 001 available
AVAIL ABILIT Y FROM
9 to 120 contacts
(standard number of contacts: 120)
AVAILABLE CONTACT LENGTHS
118
CONNECTING PIN A (mm)
SOLDER PIN B (mm)
X X X CODE
6
7
8.5
14.9
3.1
3
3
3
001
002
003
004
Due to technical progress, all information provided is subject to change without prior notice.
PIN CONNECTORS 2.54 mm
SQUARE PIN
SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
0.635 mm / SINGLE ROW / DOUBLE ROW / TRIPLE ROW
[email protected]
Right angle square pin headers, solder tail.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
DIELECTRIC STRENGTH
Black glass filled polyamide PA-GF30-FR
UL 94V-O
Brass
0.635 mm
Min. 100 cycles
3A
Min. 1’000 VRMS
For corresponding socket connectors, see pages 85-99.
PP PL ATING CODE
TERMINATION
CONNECTING PIN
70
80
18
Flash gold
Tin
Tin
Flash gold
Tin
0.25 μm gold
See page 178 for plating specs.
NNN number of poles. Replace NNN with the requested number of poles,
e.g. 890-70-NNN-20-006101 for a single row version with 8 pins becomes
890-70-008-20-006101.
890-PP-NNN-20-XXX101
Right angle square pin header, solder tail, single row
AVAIL ABILIT Y FROM
2 to 40 contacts
(standard number of contacts: 40)
892-PP-NNN-20-XXX101
Right angle square pin header, solder tail, double row
AVAIL ABILIT Y FROM
4 to 80 contacts
(standard number of contacts: 80)
894-PP-NNN-20-001101
Right angle square pin header, solder tail, triple row
Only contact length code 001 available
AVAIL ABILIT Y FROM
9 to 120 contacts
(standard number of contacts: 120)
AVAILABLE CONTACT LENGTHS
CONNECTING PIN A (mm)
X X X CODE
6
7
001
002
Due to technical progress, all information provided is subject to change without prior notice.
119
PCB CONNECTORS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PCB HEADER STRIPS 2.54 mm
SINGLE ROW / DOUBLE ROW / SOLDER TAIL
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
PCB header strips for wiring application with solder tail / connecting pin.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.5 mm
Min. 100 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
For corresponding socket connectors, see pages 69-84.
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
80
0.25 μm gold
Tin
0.25 μm gold
Tin
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 460-10-2NN-00-001101 for a double row version with 16 pins
becomes 460-10-216-00-001101.
360-PP-1NN-00-001101
Slotted head strip with solder tail / connecting pin, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
460-PP-2NN-00-001101
Slotted head strip with solder tail / connecting pin, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
370-PP-1NN-00-001101
Turret head strip with solder tail / connecting pin, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
470-PP-2NN-00-001101
Turret head strip with solder tail / connecting pin, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
380-PP-1NN-00-001101
Solder cup strip with solder tail / connecting pin, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
480-PP-2NN-00-001101
Solder cup strip with solder tail / connecting pin, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
120
Due to technical progress, all information provided is subject to change without prior notice.
PCB HEADER STRIPS 2.54 mm
SINGLE ROW / DOUBLE ROW / WIRE-WRAP
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
PCB header strips for wiring application, wire-wrap.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
WIRE-WRAP TERMINAL
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PCT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.635 mm, 3-level
Min. 100 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PL ATING CODE
TERMINATION
CONNECTING PIN
10
0.25 μm gold
0.25 μm gold
Other plating on request (see page 178 for plating specs).
NN number of poles. Replace NN with the requested number of poles,
e.g. 453-10-2NN-00-001101 for a double row version with 16 pins
becomes 453-10-216-00-001101.
353-10-1NN-00-001101
Pin header strip with wire-wrap termination, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
453-10-2NN-00-001101
Pin header strip with wire-wrap termination, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
363-10-1NN-00-001101
Slotted head strip with wire-wrap termination, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
463-10-2NN-00-001101
Slotted head strip with wire-wrap termination, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
373-10-1NN-00-001101
Turret head strip with wire-wrap termination, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
473-10-2NN-00-001101
Turret head strip with wire-wrap termination, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
383-10-1NN-00-001101
Solder cup strip with wire-wrap termination, single row
AVAIL ABILIT Y FROM
2 to 64 contacts
(standard number of contacts: 64)
483-10-2NN-00-001101
Solder cup strip with wire-wrap termination, double row
AVAIL ABILIT Y FROM
4 to 72 contacts
(standard number of contacts: 72)
Due to technical progress, all information provided is subject to change without prior notice.
121
PCB CONNECTORS
For corresponding socket connectors, see pages 69-84.
MALE JUMPERS
2.54 mm GRID
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Available with or without insulator and with 2.54, 5.08 or 7.62 mm pitch. For use with standard socket connectors.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
CONNECTING PIN Ø
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PBT-GF30-FR
UL 94V-O
Brass CuZn36Pb3 (C36000)
0.56 mm
Min. 100 cycles
3A
Max. 10 mΩ
Min. 1’000 VRMS
ORDERING INFORMATION ROHS COMPLIANT PARTS
P PL ATING CODE
TERMINATION
1
0.25 μm gold
See page 178 for plating spec.
Jumpers for socket connectors, B = 2.54 mm, not insulated (Fig. 1)
999-11-110-10
Jumpers for socket connectors, B = 2.54 mm (Fig. 2):
999-11-210-10
Black insulator
999-11-210-11
Fig. 1
Red insulator
Fig. 2
Jumpers for socket connectors, B = 5.08 mm, not insulated (Fig. 3)
999-11-112-10
Jumpers for socket connectors, B = 5.08 mm (Fig. 4):
999-11-220-10
Black insulator
999-11-220-11
Fig. 3
Red insulator
Fig. 4
Jumpers for socket connectors, B = 2.54 mm, not insulated (Fig. 1)
999-11-113-10
Jumpers for socket connectors, B = 2.54 mm (Fig. 2):
999-11-230-10
Black insulator
999-11-210-11
Fig. 5
Red insulator
Fig. 6
OPTION
Jumpers without insulator with wire Ø 0.50 mm instead of 0.56 mm.
122
WIDTH B (MM)
PART NUMBER
2.54
5.08
7.62
999-51-110-10
999-51-112-10
999-51-113-10
Due to technical progress, all information provided is subject to change without prior notice.
FEMALE JUMPERS
2 mm / 2.54 mm GRID
WWW.PRECIDIP.COM
TEL +41 32 421 04 00
[email protected]
Female jumpers, colour coded, closed or open top of insulator body.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 43)
INSUL ATOR
FL AMMABILIT Y
CONTACT
MATING PIN
MECHANICAL LIFE
RATED CURRENT
CONTACT RESISTANCE
DIELECTRIC STRENGTH
Black glass filled polyester PBT-GF30-FR
UL 94V-O
Phosphor bronze
0.635 mm
Min. 100 cycles
1 A (2 mm) / 3 A (2.54 mm)
Max. 20 mΩ
Min. 500 VRMS
PP PL ATING CODE
TERMINATION
19
Flash gold
PCB CONNECTORS
ORDERING INFORMATION ROHS COMPLIANT PARTS
See page 178 for plating specs.
2 mm jumpers for
0.5 mm pin headers, closed body:
999-19-220-00
Black insulator
2 mm jumpers for
0.5 mm pin headers, stackable open body:
999-19-320-00
Black insulator
2.54 mm jumpers for
0.635 mm pin headers, closed body:
999-19-210-00
Black insulator
999-19-210-02
Red insulator
999-19-210-06
Blue insulator
2.54 mm jumpers for
0.635 mm pin headers, stackable open body:
999-19-310-00
Black insulator
999-19-310-02
Red insulator
999-19-310-06
Blue insulator
Due to technical progress, all information provided is subject to change without prior notice.
123