LB-602 A / K2 Series LED displays Double Digits LED Numeric Display LB-602 A / K2 Series 25.0±0.1 12.5 0.25 (15.24) 1.3 14.3 19.0±0.1 10° 2−φ1.5 1.3 8.0 8.0 zFeatures 1) The height of a letter is 14.3mm. 2) Dimension is 25.0×19.0×8.0mm. 3) The package of surface color is black. Color of segment is colored in emitting color. (Blue color is only milky white) 4) Each color has anode common and cathode common respectively. zExternal dimensions (Unit : mm) 3.5Min. LB-602 A / K2 series is designed to use in the light. Materials of emission are GaAsP on GaP, AlGalnP GaP and GaN. This is the height of a letter 14.3mm, double digits LED Numeric Display that is packed by epoxy resin. 0.5 (2.54) (20.32) Tolerance are ±0.3 unless otherwise noted : zSelection guide Emitting color Red Common Anode Cathode Yellow Orange Red (High brightness) (High brightness) (High brightness) Green Blue LB-602EA2 LB-602EK2 LB-602MA2 LB-602MK2 LB-602BA2 LB-602BK2 LB-602AA2 LB-602AK2 LB-602VA2 LB-602VK2 LB-602XA2 LB-602XK2 zPin assignments 18 17 16 15 14 13 12 11 10 + + + + + + + a1 + + a2 f1 b1 f2 b2 g1 e1 g2 c1 e2 c2 d1 d2 Digit 1 D.P1 Digit 2 D.P2 + + + + + + + + + Pin No. 1 2 3 4 5 6 7 8 9 zEquivalent circuit (anode common) a1 b1 c1 d1 e1 f1 g1 D.P1 16 15 3 2 1 18 17 4 Function Pin No. Function 1 2 3 4 5 6 7 8 9 Segment "e1" Segment "d1" Segment "c1" D.P1 Segment "e2" Segment "d2" Segment "g2" Segment "c2" D.P2 10 11 12 13 14 15 16 17 18 Segment "b2" Segment "a2" Segment "f2" Digit 2 Common Digit 1 Common Segment "b1" Segment "a1" Segment "g1" Segment "f1" (cathode common) a2 b2 c2 d2 e2 f2 g2 D.P2 11 10 8 6 5 12 7 9 14 Dig.1 Pin No. a1 b1 c1 d1 e1 f1 g1 D.P1 16 15 3 2 1 18 17 4 13 COM Dig.2 a2 b2 c2 d2 e2 f2 g2 D.P2 11 10 8 6 5 12 7 9 14 COM Dig.1 13 COM Dig.2 Rev.A COM 1/2 LB-602 A / K2 Series LED displays zAbsolute maximum ratings (Ta=25°C) Symbol Parameter PD PD / seg IF IFP VR Topr Tstg Power dissipation Power dissipation Forward current Peak forward current Reverse voltage Operating temperature Storage temperature Orange Yellow Red Blue Green (High brightness) (High brightness) (High brightness) LB-602VA2 / VK2 LB-602AA2 / AK2 LB-602EA2 /EK2 LB-602XA2 / XK2 LB-602MA2 / MK2 LB-602BA2 / BK2 960 960 960 1040 1040 1040 65 42 60 65 65 65 20 10 20 25 25 25 60 ∗1 50 ∗2 60 ∗1 50 ∗2 50 ∗2 50 ∗2 5 5 5 5 5 5 −25 to +75 −30 to +85 Red Unit mW mW mA mA V ˚C ˚C ∗1 Pulse width 1ms Duty 1 / 5 ∗2 Pulse width 0.1ms Duty 1 / 10 zElectrical characteristics (Ta=25°C) Parameter Symbol Conditions Forward voltage Reverse current Peak wavelength Spectral line half width IF=10mA VR=3V IF=10mA IF=10mA VF IR λP ∆λ Orange Yellow Red (High brightness) (High brightness) (High brightness) Typ. Max. Typ. Max. Max. Typ. Max. Typ. 2.05 ∗ 2.6 ∗ 2.05 ∗ 2.6 ∗ 2.05 ∗ 2.6 ∗ 2.0 2.8 100 − 100 − 100 − 100 − 589 ∗ − 610 ∗ − 626 ∗ − 650 − 15 ∗ − 17 ∗ − 18 ∗ − 40 − Red Green Blue Typ. Max. Typ. Max. 3.6 4.2 2.1 2.8 100 − 100 − 470 − 563 − 26 − 40 − Unit V µA nm nm The products are not radiations resistant. ∗ Shows the number on the condition of IF=20mA. zLuminous intensity Color λP (nm) Red 650 Red (High brightness) 626 Orange (High brightness) 610 Yellow (High brightness) 589 Green 563 Blue 470 Type LB-602VA2 LB-602VK2 LB-602AA2 LB-602AK2 LB-602EA2 LB-602EK2 LB-602XA2 LB-602XK2 LB-602MA2 LB-602MK2 LB-602BA2 LB-602BK2 Min. Typ. Unit 5.6 16 mcd 36 90 mcd 36 90 mcd 36 90 mcd 9 25 mcd 14 56 mcd A condition of measurement is IF=10mA. Rev.A 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1