THICK FILM SURFACE MOUNT NETWORKS SMALL OUTLINE MOLDED DIP RoHS RC D SM 100 N1 1F 6A S Term.W is RoHS compliant & 260°C compatible 1 SMN16 SERIES RESISTORSCAPACITORSCOILSDELAY LINES Choice of gull-wing or J-lead styles! RCD’s SMN series feature SOIC-type packaging with gull-wing leads, or SOJ type with leads formed under the body for even greater space savings. The molded construction results in excellent moisture resistance, and compliant leads prevent solder joint fatigue under vibration and thermal shock conditions. Epoxy-molded for excellent environmental performance Standard tolerance: ±5% (1%, 2% available) Temperature coefficient: ±100ppm/°C Typ. Available on 24mm embossed plastic tape or magazine tube DERATING Single Resistor P ackag e Config. Type @ 25°C @ 70°C @ 25°C @ 70°C A .25W .16W .75W .5W B .125W .08W .75W .5W STANDARD CONFIGURATIONS (Custom circuits available.) PACKAGE (W) POWER RATING SINGLE RESISTOR (W) 16-Pin .75 14-Pin .65 Config. A .250 Config. B .125 0 Config. A (Isolated resistors) 16 PIN/8RES 25 50 75 AMBIENT TEMP. (°C) 100 S Type (SOIC) 125 150 J Type (SOJ) Pin #1 Config. B (bussed resistors) 16 PIN/15RES .016→ [.4] .016[.4] → ← ← .43±.02 [11±0.5] ← ← .43±.02 → [11±0.5] → Pin #1 SPECIFICATIONS, TYPICAL .085 [2.2] max. .079 [2] Resistance Range Resistance Tolerance Voltage Rating Temperature Range Temperature Coefficient T.C. Tracking Voltage Coefficient 33Ω to 3.3 Meg ±1, 2, 5, 10% 25VDC or √PR (whichever is less) -55 to +150°C ±200ppm/°C 50ppm/°C <50 ppm/ V Typ. Thermal Shock ±0.5% + .05Ω Short-Time Overload ±.25% + .05Ω Resistance to Solder Heat ±.25% + .05Ω Moisture Resistance ±0.5% + .05Ω Load Life (1000 hours) ±1.0% + .05Ω Dielectric Strength 200V Min. → ← .012 [.3] ←.30± .02 [7.7± 0.3] → P/N DESIGNATION: max ↓ ↑.004 [0.1] SMN 16 A ← ← .040 [1] typ. ← .240 ± .012 [6.1 ± .3] → S - 102 - J B W RCD Type Number of Pins (16 is standard) Configuration: A=Isolated, B=Bussed Package Style: S= SOIC, J = SOJ Resis.Code 1%: 3 signif. figures & multiplier (10R0=10Ω, 1000=100Ω, 1001=1K, 1002=10K, 1003=100K, 1004=1M) Resis.Code 2%-5%: 2 signif. figures & multiplier (100=10Ω, 101=100Ω, 102=1KΩ, 103=10K, 104=100K, 105=1M, etc.) Tolerance: J=5% (standard), G=2%, F=1% Packaging: B = Bulk, M = Magazine, T = Plastic Tape Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable) RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected] FA072A Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 33