RCD SMN16AJ-1000-J

THICK FILM SURFACE MOUNT NETWORKS
SMALL OUTLINE MOLDED DIP
RoHS
RC
D
SM 100
N1 1F
6A
S
Term.W is
RoHS
compliant
& 260°C
compatible
1
SMN16 SERIES
RESISTORSCAPACITORSCOILSDELAY LINES
Choice of gull-wing or J-lead styles!
RCD’s SMN series feature SOIC-type packaging with gull-wing
leads, or SOJ type with leads formed under the body for even
greater space savings. The molded construction results in
excellent moisture resistance, and compliant leads prevent
solder joint fatigue under vibration and thermal shock conditions.
Epoxy-molded for excellent environmental performance
Standard tolerance: ±5% (1%, 2% available)
Temperature coefficient: ±100ppm/°C typical
Available on 24mm embossed plastic tape or magazine tube
DERATING
Single Resistor
P ackag e
Config.
Type
@ 25°C
@ 70°C
@ 25°C
@ 70°C
A
.25W
.16W
.75W
.5W
B
.125W
.08W
.75W
.5W
STANDARD CONFIGURATIONS
(Custom circuits available.)
PACKAGE (W)
POWER RATING
SINGLE RESISTOR (W)
16-Pin
.75
.65
Config. A
.250
Config. B
.125
0
Config. A
(Isolated resistors)
16 PIN/8RES
25
50
75
AMBIENT TEMP. (°C)
100
125
150
J Type (SOJ)
S Type (SOIC)
Pin #1
Config. B
(bussed resistors)
16 PIN/15RES
.016 →
[.4]
.016[.4] → ←
←
.43±.02 [11±0.5]
←
← .43±.02
→
[11±0.5]
→
Pin #1
SPECIFICATIONS, TYPICAL
.085
[2.2] max.
.079 [2]
Resistance Range
Resistance Tolerance
Voltage Rating
Temperature Range
Temperature Coefficient
T.C. Tracking
Voltage Coefficient
33Ω to 3.3 Meg
±1, 2, 5, 10%
25VDC or √PR
(whichever is less)
-55 to +150°C
±200ppm/°C
50ppm/°C
<50 ppm/ V Typ.
Thermal Shock
±0.5% + .05Ω
Short-Time Overload
±.25% + .05Ω
Resistance to Solder Heat
±.25% + .05Ω
Moisture Resistance
±0.5% + .05Ω
Load Life (1000 hours)
±1.0% + .05Ω
Dielectric Strength
200V Min.
→
← .012 [.3]
←.30± .02 [7.7± 0.3] →
P/N DESIGNATION:
max
↓
↑.004
[0.1]
SMN 16 A
←
← .040 [1] typ.
←
.240 ± .012
[6.1 ± .3]
→
S - 102 - J B W
RCD Type
Number of Pins (16 is standard)
Configuration: A=Isolated, B=Bussed
Package Style: S= SOIC, J = SOJ
Resis.Code 1%: 3 signif. figures & multiplier (10R0=10Ω,
1000=100Ω, 1001=1K, 1002=10K, 1003=100K, 1004=1M)
Resis.Code 2%-5%: 2 signif. figures & multiplier (100=10Ω,
101=100Ω, 102=1KΩ, 103=10K, 104=100K, 105=1M, etc.)
Tolerance: J=5% (standard), G=2%, F=1%
Packaging: B = Bulk, M = Magazine, T = Plastic Tape
Termination: W= Lead-free, Q= Tin/Lead
(leave blank if either is acceptable)
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected]
FA072A Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
33