Capacitor Discharge Resistors, 10-16 Watt RESISTORS Series CD, CDF . CAPS & COILS . DELAY LINES C Series CD □ Designed for mounting on high-power □ .60” capacitors with industry-standard .875” & 1.25” terminal spacing (non-standard Mounting spans available from 0.5” to 2.5”) New CDF Series offers low profile design at a price below conventional CD Series Volt Rating up to 1.2KV □ □ Temperature Range:-55°C to + 350°C □ 1KΩ to 100KΩ standard, .260” A .90” B Max .260” Series CDF (non-standard values available) Performance per Mil-R-26 □ □ Multiple resistor strings available C A 1.50” B Max for use on capacitor banks RCD Type Wattage 25ºC Voltage A B Max C Max CD170, CDF170 CD175, CDF175 CD180, CDF180 10W 13W 16W 700V 1000V 1200V .875” 1.25” 1.25” 1.58” 2.00” 2.40” .407” .407” .545” Standard Resistance Values (±5%): 1KΩ, 5KΩ, 10KΩ, 15KΩ, 18KΩ, 22KΩ, 27KΩ, 33KΩ, 47KΩ, 68KΩ, 82KΩ, 100KΩ Non-standard resistance values (as low as 0.005Ω) and tolerances to ± 0.1% available Series CD Temperature Coefficient: 30 ppm/°C (available to 5ppm) Dielectric Strength: 500 Vdc (for 750V specify opt.91, for 1KV specify opt.33) Insulation resistance: 10,000 Mohms minimum dry, 100 Mohms minimum after moisture test. Short time overload: 10 times rated power, 5Sec, not to exceed volt rating Low Inductance models available: (specify option ‘X’) Series CDF RCD COMPONENTS INC., 520 E.Industrial Park Dr., Manchester, NH USA 03109 Tel: (603) 669-0054 Fax:(603) 669-5455 E-Mail:[email protected] www.rcdcomponents.com RCD DWG FA2688C Specifications subject to change without notice