ULTRA FAST RECOVERY RECTIFIER RoHS UF5400 Thru UF54008 3.0 Amps FEATURES • • • • .375(9.50) .335(8.50) Low power loss, high efficiency Low leakage High speed switching High current capability 1.0(25.4) MIN 1.0(25.4) MIN .220(5.60) .052(1.30) .197(5.00) .048(1.20) DIA DO-201AD / DO-27 Dimensions in inches and (millimeters) MECHANICAL DATA • Transfer Molded plastic body (UL 94V-0 rated) • Axial leads solderable per MIL-STD-202 Method 208 • Polarity: Color band denotes cathode end 260° C/10 seconds/0.375” (9.5mm) lead lengths at 5lbs (2.3kg) tension • Weight: 1.2 gram MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS Rating at 25° C ambient temperature unless otherwise specified. Single phase, h alf w ave , 60 H z, r esistive o r i nductive l oad . For capactitive l oad, d erate c urrent b y 20% Parameter Symbol UF5400 UF5401 UF5402 UF5403 UF5404 UF5405 UF5406 UF5407 UF5408 Maximum Repetitive Peak Reverse Voltage VRRM 50 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 100 200 300 400 500 600 140 210 200 300 280 350 420 400 500 600 800 Unit 1000 V 560 760 V 800 1000 V Maximum Average Forward Rectified Current @ Ta = 55˚C I F (AV) 3.0 A Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) I FSM 150 A Maximum Instantaneous Forward Voltage @1.0A VF Maximum DC Reverse Current At rated DC blocking voltage IR @ TA = 25˚C @ TA = 125˚C 1.0 1.3 1.7 5.0 V A T RR 50 Typical Junction Capacitance (Note 2.) CJ 70 Operating Temperature Range TJ -65 to +150 ˚C TSTG -65 to +150 ˚C Reverse Recovery Time (Note 1.) Storage Temperature Range 75 nS 50 ˚C / W Note: 1. Test Condition: IF = 0.5A, IR = 1.0A, IRR = 0.25A. 2. Measured at 1MHz and applied reverse of 4.0 volts. 3. Thermal resistance from junction to ambient with 0.375” (9.5mm) lead length, P.C.B. mounted. Page 1 of 2 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C3HER01 2013.07.18 ULTRA FAST RECOVERY RECTIFIER RoHS UF5400 Thru UF54008 3.0 Amps RATING & CHARACTERISTIC CURVES FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG. 2 - AVERAGE FORWARD CURRENT CURVE TA=55°C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 125 3.0 AVERAGE FORWARD CURRENT (A) PEAK FORWARD SURGE CURRENT (A) 150 100 75 50 25 RESISTIVE OR INDUCTIVE LOAD 2.5 2.0 1.5 1.0 0.5 0 0 20 100 10 1 0.375" (9.5mm) LEAD LENGTH 40 NUMBER OF CYCLES AT 60Hz 60 80 100 120 140 160 AMBIENT TEMPERATURE (°C) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 100 TJ=125°C INSTANTANEOUS REVERSE CURRENT (µA) INSTANTANEOUS FORWARD SURGE CURENT (µA) UF5400 - UF5404 10 UF5405 - UF5408 1 TJ=25°C PULSE WIDTH=300ms 1% DUTY CYCLE 0.1 0.01 0.4 TJ=100°C 10 TJ=125°C TJ=100°C 1 TJ=25°C 0.1 UF5400-UF5404 UF5405-UF5408 0.01 0.6 0.8 1.0 1.2 1.4 1.6 0 1.8 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) INSTANTANEOUS FORWARD VOLTAGE (V) FIG.5-REVERSE RECOVER TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 160 TJ=25°C f=1.0 MHZ Vsig=50mVp-p 140 120 100 UF5400-UF5404 UF5405-UF5408 80 60 40 20 0.1 1 10 100 Page 2 of 2 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C3HER01 2013.07.18