SURFACE MOUNT FAST RECOVERY RECTIFIER FM101 Thru FM107 1.0Amps RoHS FEATURES SOD - 123FL • Voltage range 50~1000 volts • Fast recovery time • Low profile package • High surge current capability • Glass passivated chip • Lead free / RoHS compliant • High temperature soldering: 250°C /10 seconds at terminals 1.9± 0.1 1.0 0.2 Cathode Band Top View 1.4± 0.15 0.10-0.30 2.8 0.1 MECHANICAL DATA • • • • • 0.6 0.25 Molded plastic body (UL 94V-0) Solder plated terminals Polarity: Indicated by cathode band Packaging: EIA STD RS-481 Weight: 0.01 grams 3.7 0.2 Dimensions in millimeters MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS Rating at 25°C ambient temperature unless otherwise specified. Parameter Symbol FM101 FM102 FM103 FM104 FM105 FM106 FM107 Unit Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current IF(AV) 1.0 A Peak Forward Surge (Non-Repetitive) Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) I FSM 30 A Maximum Instantaneous Forward Voltage @1.0A VFM 1.3 V IRRM1 IRRM2 5 100 µA Maximum DC Reverse Current At rated DC blocking voltage @ TA = 25ºC @ TA = 100ºC 150 TRR Junction Thermal Resistance R0JA R0JL 20 42 ºC / W TJ -55 to +150 ºC TSTG -55 to +175 ºC Operating Temperature Range Storage Temperature Range 250 500 Reverse Recovery Time (Note 1) ns NOTE: 1. Reverse Recovery Test conditions:IF=0.5A,IR=1.0A,IRR=0.25A. Page 1 of 2 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C5BA03 2015.04.02 SURFACE MOUNT FAST RECOVERY RECTIFIER FM101 Thru FM107 1.0Amps RoHS Rating and characteristic curves (FM101 THRU FM107) FIG.1-TYPICAL FORWARD FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,(A) CHARACTERISTICS 10 3.0 1.0 1.2 1.0 0.8 Single Phase 0.6 Half Wave 60Hz Resistive Or Inductive Load 0.4 0.2 0 0 20 40 TJ=25 C 60 80 100 120 140 160 180 200 AMBIENT TEMPERATURE ( C) Pulse Width 300us 1% Duty Cycle 0.1 .01 .6 .8 1.0 1.2 1.4 1.6 1.8 2.0 FORWARD VOLTAGE,(V) FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS 50W NONINDUCTIVE 10W NONINDUCTIVE ( ) (+) D.U.T. 25Vdc (approx.) PULSE GENERATOR (NOTE 2) ( ) PEAK FORWAARD SURGE CURRENT,(A) FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 50 40 30 Sine Wave 20 JEDEC method 10 0 1 5 2. Rise Time= 10ns max., Source Impedance= 50 ohms. | | | | | | | | 0 -0.25A 100 FIG.5-TYPICAL JUNCTION CAPACITANCE NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. +0.5A 50 10 NUMBER OF CYCLES AT 60Hz OSCILLISCOPE (NOTE 1) trr 8.3ms Single Half TJ=25 C (+) 1W NONINDUCTIVE 35 JUNCTION CAPACITANCE,(pF) INSTANTANEOUS FORWARD CURRENT,(A) 50 30 25 20 15 10 5 0 -1.0A 1cm .01 SET TIME BASE FOR .05 .1 .5 1 5 10 50 100 REVERSE VOLTAGE,(V) 50 / 10ns / cm Page 2 of 2 RFE International • Tel:(949)583-0808 • Fax:(949)583-9898 • E-Mail [email protected] C5BA03 2015.04.02