SMD TANTALUM CAPACITORS SMT Series: Surface Mount INTRODUCTION RoHS ü DIMENSION(mm) Solid tantalum chip capacitors designed and manufactured with the demanding requirements of surface mount technology in mind. We offer five body sizes. They have lower ESR Compared with the dipped tantalum capacitors. The product is compatible with automatic pick and place equipment. Suitable for military equipment, computers, mobile phone and other electronic products. Meets the requirements of EIA 535BAAC, QC300801, and Q/YHC.45-01 standard. MAXIMUM RATING & ELECTRICAL CHARACTERISTICS All technical data relate to an ambient temperature of 25°C. Performance Items -55°C ~ +125°C (above 85°C, use derated voltage) Operating Voltage Range 0.1 µF ~ 680 µF Capacitance Range ± 20%, ±10% @ 120Hz Capacitance Tolerance 55 / 125 / 21 Climatic Category 2% per 1,000hrs at 85°C with 0.1 Ω/V series impedance 60% confidence level Reliability I < 0.01CV or 0.5µA (whichever is greater) DC Leakage Current (20°C) Capacitance Change Capacitance (µF) -55°C Temperature Characteristics +85°C +125°C -10 +10 Derated Voltage > 85°C Voltage Derating Surge Voltage -55°C ~ +85°C Derated Surge Voltage > +85°C +125°C 10 12 20Vdc 25Vdc 35Vdc 50Vdc 13 16 23 33 26 32 46 65 16 20 26 38 +20°C +85°C +125°C 6 4 6 6 10 6 10 10 12 8 12 12 4Vdc 6.3Vdc 10Vdc 16Vdc 2.5 4 6.3 10 5 8 13 20 3.4 5 9 12 +12 100 ~ 680 Rated Voltage -55°C ~ +85°C +85°C -55°C <1.0 1.5 ~ 68 DCL Max DF Max DIMENSIONS (mm) Code EIA Code EIA Metric L + 0.20 (0.008) W +0.20 (0.008) H +0.20 (0.008) W 1 +0.20 (0.008) S A 0805 2012 2.00 (0.079) 1.20 (0.047) 1.20 (0.047) 1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) B 1210 3528-21 3.50 (0.138) 2.80 (0.110) C 2312 6032-28 6.00 (0.236) D 2917 7343-31 E 2917 7343-43 A +0.30 (0.012) -0.20 (0.008) S Min. 1.20 (0.047) 0.50 (0.012) 1.10 (0.043) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 ( 0.055) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114) 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) Note: S, A, B, C, D - EIA Standard EIA-535BAAC E - Extended Range (high profile D case, 7343H EIA-535BAAC) W1 - dimension applies to the termination width for A dimensional area only Page 1 of 4 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C5BA04 2013.09.09 SMD TANTALUM CAPACITORS SMT Series: Surface Mount RoHS ü CAPACITANCE, RATED VOLTAGE AND ESR (4V ~ 16V) Rated Voltage DC (VR) to 85°C Capacitance 4V (0G) Code Case Code ESR Max (Ω) 6.3V (0J) Case Code @ 100kHz 10V (1A) ESR Max (Ω) Case Code @ 100kHz 16V (1C) ESR Max (Ω) Case Code @ 100kHz @ 100kHz 0.68 684 S 1 105 S / A* 1.5 155 S S = 30 S/A 2.2 225 S S = 25 S/A 3.3 335 S/A 4.7 475 S / A* 6.8 685 A* / B 10 106 A* / B 15 156 22 S = 20 A=9 S = 20 A = 7.5 A = 6.5 B=6 S / A* S = 25 A = 12 S = 20 A=9 S = 12 A=7 S / A* S / A* A* / B S = 10 A = 10 S=7 A=7 A = 5.5 B = 5.0 S / A* S / B* A/B A* A=6 A / B* A = 5.0 A/B A* / B* S=5 B=4 A / B* A = 4.0 A / B / C* A = 6.5 B=4 A / B* A = 4.0 A/B/C A = 3.0 A/B/C A* / B* A=4 B = 3.5 A / B* A = 3.5 A/B/C A = 3.0 B = 2.8 AM/ B / C 226 B/C B = 3.2 C = 2.5 A / B* / C* A = 3.0 A/B/C 33 336 B/C B = 2.8 C = 2.2 A / B */ C* A = 2.2 A/B/C/D 47 476 C/D A / B / C / D* 68 686 C/D C = 1.8 D = 1.3 C = 1.6 D = 1.1 100 107 C/D C = 1.3 D = 0.9 BM / C / D* 150 157 C/D C = 1.3 D = 0.9 B/C/D 220 227 E E = 0.9 E E = 0.9 E E = 0.9 E 330 337 E E = 0.9 E E = 0.9 E E = 0.9 EM 470 477 E E = 0.9 E E = 0.9 E E = 0.9 680 687 E E = 0.9 E E = 0.9 B / C / D* A = 1.6 B = 2.0 C = 1.6 B = 0.9 C = 1.5 B = 1.7 C = 0.9 B = 1.2 C = 1.3 D = 0.9 B/C/D B/C/D B / C / D / E* C/D/E A = 3.0 B = 2.4 A = 1.7 B = 1.8 C = 1.6 B = 1.0 C = 1.2 B = 1.4 C = 1.3 B = 1.4 C = 1.2 D = 0.9 C = 0.9 D = 0.9 E = 0.9 ESR Max (Ω) B/ C / D B/ C / D C/D C/D C/D/E D/E S = 25 S = 20 A = 11 S = 12 A=8 A = 6.5 A = 5.0 B = 4.5 A = 4.0 B = 3.5 A = 3.5 B = 2.5 A = 3.0 B = 2.8 C = 2.0 A = 2.0 B = 2.5 C = 1.8 B = 2.3 C = 1.0 D = 1.1 B = 2.1 C = 1.5 D = 0.9 C = 0.5 D = 0.9 C = 1.3 D = 0.9 C = 1.0 D = 0.6 E = 0.9 D = 0.9 E = 0.3 E = 0.9 0.5 Note: • “ * “ case code : not recommended for new designs, offer higher voltage or smaller case size substitution • M superscript : ±20% tolerance only • All technical data related to an ambient temperature of 25°C Page 2 of 4 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C5BA04 2013.09.09 SMD TANTALUM CAPACITORS SMT Series: Surface Mount RoHS ü CAPACITANCE, RATED VOLTAGE AND ESR (20V ~ 50V) Rated Voltage DC (VR) to 85°C Capacitance 20V (1D) Code Case Code ESR Max (Ω) 25V (1E) Case Code @ 100kHz ESR Max (Ω) 50V (1H) 35V (1V) Case Code @ 100kHz ESR Max (Ω) Case Code @ 100kHz @ 100kHz 0.1 104 S 25 A 24.0 A 0.15 154 S 25 A 21.0 A/B 0.22 224 S 25 A 18.0 A/B 0.33 334 S 25 A 15.0 A/B 0.47 474 S 25 A 14.0 A/B A = 12.0 B = 10.0 A/B/C 0.68 684 S / A* S = 25 A = 12 A 10.0 A/B A = 8.0 B = 8.0 A/B/C 1 105 A 9.0 A 8.0 A/B 1.5 155 A 6.5 A/B A = 7.5 B = 5.0 A/B/C 2.2 225 A/B 3.3 335 A/B 4.7 475 A / B / C* 6.8 685 A/B/C 10 106 B/C 15 156 B / C / D* 22 226 B/C/D 33 336 C/D 47 476 C/D/E 68 686 C /D/E 100 107 D/E 150 157 E A = 5.3 B = 3.5 A = 4.5 B = 3.0 A = 4.0 B = 3.0 A = 2.4 B = 2.5 C = 2.0 B = 2.1 C = 1.2 B = 2.0 C = 1.7 B = 1.8 C = 1.6 D = 0.9 C = 1.5 D = 0.9 C = 0.5 D = 0.9 E = 0.9 C = 0.5 D = 0.4 E = 0.9 D = 0.5 E = 0.4 A/B A / B / C* A / B / C* A = 7.0 B = 4.5 A = 3.7 B = 3.5 A = 3.1 B = 1.5 A/B/C B/C B/C/D A = 7.5 B = 6.5 A = 7.5 B = 5.2 C = 4.5 A = 4.5 B = 4.2 C = 3.5 A = 3.5 B = 2.5 B = 3.1 C = 2.2 D = 1.5 C = 1.8 D = 1.3 C = 1.6 D = 1.0 E = 0.9 C = 1.4 D = 0.9 B = 2.8 C = 2.0 B = 2.5 C = 1.8 D = 1.2 C = 1.6 D = 1.0 C/D/E C/D C = 1.4 D = 0.9 D/E D = 0.9 E = 0.5 D/E D = 0.9 E = 0.9 D/E D = 0.9 E = 0.9 D/E D = 0.9 E = 0.9 E 0.9 E 0.9 B/C B/C/D C/D E M C/D C/D ESR Max (Ω) A M/ B / C B/C/D B/C/D C/D C/D 22.0 A = 15.0 B = 17.0 A = 18.0 B = 14.0 A = 17.0 B = 12.0 A = 9.5 B = 9.5 C = 8.0 A = 7.9 B = 8.0 C = 7.0 A = 6.6 B = 7.0 C = 5.5 B = 5.4 C = 4.5 D = 4.0 B = 4.5 C = 2.5 D = 2.5 C = 2.5 D = 2.0 C = 1.4 D = 1.4 C/D C = 1.0 D = 1.0 D/E D = 0.8 E = 1.0 D/E D = 0.6 E = 0.6 0.3 0.3 Note: • “ * “ case code : not recommended for new designs, offer higher voltage or smaller case size substitution • M superscript : ±20% tolerance only • All technical data related to an ambient temperature of 25°C Page 3 of 4 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C5BA04 2013.09.09 SMD TANTALUM CAPACITORS SMT Series: Surface Mount RoHS ü PART NUMBER EXAMPLE SMT 105 M 1V B R Tape & Reel Code Case Size Voltage Code K (+10%), M (+ 20%) TAPING SPECIFICATIONS Case Size A TOLERANCE A + 0.2 B + 0.2 D + 0.1 D0 Min E + 0.2 F + 0.2 K + 0.2 P + 0.1 P1 + 0.1 P2 + 0.1 T + 0.3 W + 0.2 1.9 3.5 1.5 1.0 1.75 3.5 1.9 4 2 4 0.2 8 B 3.1 3.8 1.5 1.0 1.75 3.5 2.1 4 2 4 0.3 8 C 3.6 6.4 1.5 1.5 1.75 3.5 3.0 8 2 4 0.3 12 D 4.7 7.7 1.5 1.5 1.75 3.5 3.3 8 2 4 0.3 12 E 4.6 7.6 1.5 1.5 1.75 3.5 3.6 8 2 4 0.3 12 K M 10% 20% E Φ50 Min. Andode (+) F Φ178 + 2.0 OLD CAPACITANCE CODES W TAPE AND REEL DIMENSIONS Case Size A W Qty / Reel 8.4 + 1.5 2000 CAP (µF) OLD Code NEW Code CAP (µF) OLD Code NEW Code 0.1 0R1 104 10 100 106 0.15 R15 154 15 150 156 0.22 R22 224 22 220 226 0.33 R33 334 33 330 336 0.47 R47 474 47 470 476 0.68 R68 684 68 680 686 1.0 010 105 100 101 107 1.5 1R5 155 150 161 157 B 2.2 2R2 225 220 221 227 C 3.3 3R3 335 330 331 337 4.7 4R7 475 470 471 477 6.8 6R8 685 680 681 687 D E 12.4 + 2.00 500 2500 Note: Pt# Code changes effective 3/1/2013 Page 4 of 4 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C5BA04 2013.09.09