RoHS FEATURES • Fast Recovery • Low forward voltage drop • High reliabillity • High surge current capability MECHINCAL DATA • Molded plastic body (UL 94V-0 rated) • Lead: Axial leads solderable per MIL-STD-202 Method 208 • Polarity: Color band denotes cathode end • High temperature soldering 260°C/10 seconds • Weight: 0.40 gram DO-15 Dimensions in inches and (millimeters) MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS Rating at 25°C ambient temperature unless otherwise specified. Single phase, h alf w ave , 60 H z, r esistive o r i nductive l oad . For capactitive l oad, d erate c urrent b y 20% Symbol FR201 Maximum Repetitive Peak Reverse Voltage V RRM 50 100 200 400 Maximum RMS Voltage V RMS 35 70 140 Maximum DC blocking Voltage V DC 50 100 200 Maximum Average Forward Rectified Current .375” (9.5mm) Lead length@T A =55°C I F(AV) 2.0 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) I FSM 60 A VF 1.3 V IR 5.0 50 Parameter Maximum Instantaneous Forward Voltage@ 2 . 0 A Maximum DC Reverse Current @ T A =25°C at rated DC Blocking voltage @ T A =100°C Maximun Reverse Recovery Time (Note 1) Typical Thermal Resistance (Note2) Operating Temperature Range Storage Temperature Range FR202 T RR RθJA RθJL FR203 FR206 FR207 Unit 600 800 1000 V 280 420 560 700 V 400 600 800 1000 V FR204 FR205 150 A 250 25 20 500 nS °C/W TJ -65 to + 150 °C T STG -65 to + 150 °C NOTE: 1. Reverse Recovery Test conditions: IF=0.5A, IR=1.0A, IRR=0.25A. 2. Mounted on Cu-Pad Size 10mm x 10mm on P.C.B. Page 1 of 2 C3FR04 2011.10.01 RoHS RATING & CHARACTERISTIC CURVES FIG.2-MAXIMUM FORWARD CURRENT DERATING AV ERA GE F OR WARD CU RR ENT (A) PE A K F ORWA RD S U RGE CURR E NT ( A ) FIG.1-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT AMBIENT TEMPERATURE (°C) NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTA NTANEOUS FORWARD SURGE CU R RENT (A) INSTANTA N EOUS REVERSE CURRENT (u A ) FIG.4-TYPICAL REVERSE CHARACTERISTICS PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG.5-REVERSE RECOVER TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50W NON-INDUCTIVE (+) 50Vdc (approx) (-) 10W NON-INDUCTIVE DUT PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) NOTES: 1. Rise Time=7ns max. Input Impedance=1megohom 22pF 2. Rise Time=10ns max. Source Impedance=50 ohms. Set Time Base For 5/10ns/cm Page 2 of 2 C3FR04 2011.10.01