RoHS FEATURES • Fast Recovery • Low forward voltage drop • High reliabillity • High surge current capability Mechanical Data • Molded plastic body (UL 94V-0) • Axial leads solderable per MIL-STD-202 Method 208 • Polarity: Color band denotes cathode end • High temperature soldering 250°C/10 seconds • Weight: 0.34 gram DO-41 Dimensions in inches and (millimeters) MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS Rating at 25°C ambient temperature unless otherwise specified. Single phase, h alf w ave , 60 H z, r esistive o r i nductive l oad . For capactitive l oad, d erate c urrent b y 20% Symbol FR101 Maximum Repetitive Peak Reverse Voltage V RRM 50 100 200 400 Maximum RMS Voltage V RMS 35 70 140 Maximum DC blocking Voltage V DC 50 100 200 Maximum Average Forward Rectified Current .375” (9.5mm) Lead length@T A =55°C I F(AV) 1.0 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) I FSM 30 A VF 1.2 V IR 5.0 100 Parameter Maximum Instantaneous Forward Voltage @1.0 A Maximum DC Reverse Current @ T A =25°C at rated DC Blocking voltage @ T A =100°C FR102 FR103 FR106 FR107 Unit 600 800 1000 V 280 420 560 700 V 400 600 800 1000 V FR104 FR105 150 A 250 500 Maximun Reverse Recovery Time (Note 1) T RR Typical Thermal Resistance (Note2) RθJA RθJL 55 25 °C/W TJ -55 to + 125 °C T STG -55 to + 150 °C Operating Temperature Range Storage Temperature Range nS NOTE: 1. Reverse Recovery Test conditions: I F = 0.5A, I R = 1.0A, I RR =0.25A. 2. Mounted on Cu-Pad Size 10 mm x 10 mm on P.C.B. Page 1 of 2 C3FR02 2011.10.05 RoHS RATING & CHARACTERISTIC CURVES FIG.2-MAXIMUM FORWARD CURRENT DERATING PEAK FORWARD SU R GE CURR E NT (A) AV E RAGE FOR WARD CURR E NT (A) FIG.1-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE (°C) FIG.4-TYPICAL REVERSE CHARACTERISTICS INSTANTA N EOUS REVERSE CURRENT (uA) INSTA NTA NEOU S F ORWA RD S URGE C UR REN T ( A ) FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG.5-REVERSE RECOVER TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50W NON-INDUCTIVE (+) 50Vdc (approx) (-) 10W NON-INDUCTIVE DUT PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) NOTES: 1. Rise Time=7ns max. Input Impedance=1megohom 22pF 2. Rise Time=10ns max. Source Impedance=50 ohms. Set Time Base For 5/10ns/cm Page 2 of 2 C3FR02 2011.10.05