750W Outdoor TWT Amplifier for Satellite Communications C - Band The T07CO C-Band 750 Watt TWT Medium Power Amplifier — high efficiency in an environmentally sealed compact package designed for outdoor operation Rugged and Easy to Maintain Provides 750 watts of power in a rugged and compact weatherproof package, digital ready, for wideband, single- and multi-carrier satellite service in the 5.85 to 6.65 GHz frequency band (to 6.725 or 7.1 GHz optional). Ideal for transportable and fixed earth station applications. Built-in fault diagnostic capability via remote monitor and control. Easy access enclosure for improved serviceability. CANBUS architecture improves reliability and improves noise immunity. Cost Effective and Efficient Mounting at the antenna improves performance through minimized cable losses and saves cost in system design. Employs a high efficiency, dualdepressed collector helix traveling wave tube, thereby reducing operating costs. Simple to Operate User-friendly microprocessor-controlled logic with integrated Ethernet computer interface. Digital metering, pin diode attenuation and optional integrated linearizer for improved intermodulation performance. SNMP enabled. Global Applications Meets International Safety Standard EN-60215, Electromagnetic Compatibility 2004/108/EC and Harmonic Standard EN-61000-3-2 to satisfy worldwide requirements. Worldwide Support Backed by over three decades of satellite communications experience, and CPI’s worldwide 24-hour customer support network that includes more than twenty regional factory service centers. 811 Hansen Way P.O. Box 51625, Palo Alto, CA 94303 tel: +1 (650) 846-3803 fax: +1 (650) 424-1744 e-mail: [email protected] www.cpii.com/satcom 750W Outdoor TWT Amplif ier Plays in the Rain C-B a n d SPECIFICATIONS, T07CO Electrical Electrical (continued) Frequency 5.85 to 6.65 GHz Output Power TWT Flange 750 W min. (58.75 dBm) 650 W min. (58.10 dBm) OPTIONS: • Integral Linearizer Bandwidth 800 MHz Gain 70 dB min. at rated power 70 dB min. at small signal • Remote Control Panel RF Level Adjust Range 0 to 30 dB typ. • Redundant and Hybrid Power Combined Systems Gain Stability At constant drive & temp. • Integral L-Band Block Upconverter (BUC) Over temp., constant drive • Integrated switch control and drive (1:1 or 1:2) • Computer Interface: Ethernet Interface (standard) or RS422/485 (optional) • Extended frequency band, 5.85 GHz to either 6.725 GHz or 7.1 GHz ±0.25 dB/24hr max. (after 30 min. warmup) ±0.75 dB over ±10°C Power Consumption 2.7 kVA max. 2.0 kVA typ. at 3 dB backoff Power Factor 0.95 min. Inrush Current 200% max. Environmental (Operating) Relative Humidity 100% condensing Altitude 10,000 ft. with standard adiabatic derating of 2°C/1000 ft., operating; 50,000 ft., non-operating 1.3:1 max. Shock and Vibration 20 G peak, 11 msec, 1/2 sine; 2.1 G rms, 5 to 500 Hz. 2.0:1 1.5:1 Any value Acoustic Noise 68 dBA typ. (as measured at 3 ft.) Heat Dissipation 2000 W max. Small Signal Gain Variation Across any 80 MHz band Across the 800 MHz band 1.0 dB pk-pk max. 4.0 dB pk-pk max. Input VSWR 1.3:1 max. Output VSWR Load VSWR Continuous operation Full spec compliance Operation without damage Phase Noise IESS Phase Noise Profile 12 dB below mask AC fundamentals -42 dBc (IESS-308 by 12 dB) Sum of spurs (370 Hz to 1 MHz) -50 dBc Mechanical AM/PM Conversion Cooling (TWT) Forced air with integral blower RF Input Connection Type N Female 2.5°/dB max. up to 51.4 dBm rated output power (up to 54.4 dBm below with linearizer) RF Output Connection CPR-137 waveguide flange, grooved, threaded UNC 2B 10-32 RF Output Monitor Type N female Harmonic Output -60 dBc at rated power, second and third harmonics Dimensions (W x H x D) 12.75 x 11.5 x 22.25 in. (324 x 292 x 566 mm) Noise Density <-150 dBW/4 kHz, 3.4 to 4.2 GHz <-65 dBW/4 kHz, passband (<-60 dBW/4 kHz w/ optional linearizer) <-110 dBW/4 kHz, 12.0 to 18.0 GHz Weight 79 lbs (36 kg) max. Intermodulation -24 dBc max. with two equal carriers at total output power of 51.1 dBm (54.1 dBm with optional integral linearizer) Note: Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. PDF Single phase, 208-240 VAC ±10% 47-63 Hz -40°C to +60°C operating; -40°C to +75°C non-operating ±0.02 dB/MHz max. For more detailed information, please refer to the corresponding CPI Technical Description. MAY 14 Primary Power Voltage Frequency 0.01 ns/MHz linear max. 0.001 ns/MHz sq. parabolic max. 0.5 ns pk-pk ripple max. Ambient Temperature Small Signal Gain Slope Certificate Number: 30515 MKT 334, ISSUE C Group Delay (in any 80 MHz band)