TL06TO - Communications & Power Industries

600W Outdoor TWT High Power Amplifier
for Military Satellite Communications
Tri- Band
The TL06TO Series
Simple to Operate
Provides up to 600 watts of peak power in a
rugged and compact weatherproof package,
with a digital serial interface, for wideband,
single-and multi-carrier satellite service in C, X
and Ku-bands. Ideal for mobile and fixed earth
station applications.
User-friendly microprocesor-controlled logic with
integrated RS422/485 computer interface. Digital
metering, optional pin diode attenuator and solid
state IPA for higher gain.
Cost Effective and Efficient
Mounting at the antenna improves performance
through minimized cable losses and saves cost in
system design. Employs a high efficiency, multistage depressed collector helix traveling wave
tube, enabling higher operating temperatures
reducing operating costs.
Easy to Maintain
Modular design and built-in fault diagnostic
capability via remote monitor and control.
Global Applications
Meets Electromagnetic Compatibility Directive
2004/108/EC and Harmonic Standard
EN-61000-3-2 to satisfy worldwide requirements.
Worldwide Support
Reliable
Designed and built to survive in extremely
adverse environmental conditions and features
increased cooling margin for longer life.
Backed by over two decades of satellite
communications experience, and CPI’s worldwide
24-hour customer support network that includes
sixteen regional factory service centers.
811 Hansen Way
P.O. Box 51625, Palo Alto, CA 94303
tel: +1 (650) 846-3803
fax: +1 (650) 424-1744
e-mail: [email protected]
www.cpii.com/satcom
600W Outdoor TWT High Power Amplif ier
Plays in the Rain
Tri-Band
600 Watt TWT High Power
Amplifier — high efficiency
in an environmentally
sealed compact package
designed for outdoor
operation
Tri-B a n d
SPECIFICATIONS
TL06TO 600 W Series
Electrical
OPTIONS:
• Integrated Switch
Control
• Redundant Switch
Subsystems
• Integrated
Linearizer: X-band
or X/Ku-band
• 1 RU Remote
Control Panel
• Extended Ku-Band
(13.75 - 14.50 GHz)
• Extended C-Band
(5.85 - 6.65 GHz)
Frequency
Output Power, min.
TWT, Peak
Flange, Plin
Flange, Plin with linearizer
Gain
at rated linear power
at small signal
Small Signal Gain Slope
Small Signal Gain Variation
Gain Stability (at constant drive
and temperature)
VSWR
Input
Output
Load
Phase Noise
AM/PM Conversion
Noise Density (at max. gain)
Transmit Band
Receive Band
Intermodulation (with two equal
carriers)
Spectral Regrowth
C-Band
X-Band
Ku-Band
5.85 - 6.425 GHz
7.9 - 8.4 GHz
13.75 - 14.50 GHz
350 W (55.44 dBm)
240 W (53.80 dBm)
N.A.
600 W (57.78 dBm)
125 W (50.97 dBm)
300 W (54.80 dBm)
350 W (55.44 dBm)
115 W (50.60 dBm)
250 W (54.00 dBm)
70 dB min.
73 dB min.
72 dB min.
72 dB min.
± 0.04 dB/MHz max.
1.5 dB pk-pk max. (across any 120 MHz band)
2.5 dB pk-pk max. (across each full frequency band)
72 dB min.
72 dB min.
± 0.25 dB/24 hours max.
1.3:1 max.
2.2:1 max.
2.0:1 max.; no degradation, infinite VSWR without damage
12 dB below IESS-308 mask
4.0˚/dB max.
-65 dBW / 4 kHz max.
-70 dBW / 4 kHz max.
-65 dBW / 4 kHz max.
-60 dBW / 4 kHz max.
-25 dBc max. at 7.5 dB OBO
-25 dBc max. at 7.5 dB OBO (at 4.5 dB OBO with optional linearizer)
-28 dBc max. at 6 dB OBO
-30 dBc max. at 6 dB OBO (at 3 dB OBO with linearizer)
Group Delay
Linear
Parabolic
Ripple
Primary Power
Power Consumption
Power Factor
0.01 nsec/MHz max.
0.005 nsec/MHz sq. max.
0.5 nsec pk-pk max.
110 - 240 VAC ±10% , single phase; 47-63 Hz
1800 VA typ., 2000 VA max.
0.95 min., meets requirements of Harmonics EMC Directive EN61000-3-2
Environmental
Ambient Temperature (operating)
Relative Humidity
Altitude
Shock and Vibration
-40˚C to +60˚C, including solar loading
100% condensing
10,000 ft with standard adiabatic derating of 2˚C/1000 ft
20 g pk, 11 msec, 1/2 sine; 2.1 G rms, 5 to 500 Hz
Mechanical
Cooling
RF Input Connection
RF Output Connection
RF Output Monitor
Dimensions (W x H x D)
Weight
Forced air with integral blower
Type N Female
WRD-580D28 waveguide flange, threaded 6-23 UNC-2B
Type N Female
12.5 x 6.75 x 30 inches (318 x 172 x 762 mm)
85 lbs (38.6 kg) typ.
Heat and Acoustic
Heat Dissipation
Acoustic
Mounting hardware is provided with each amplifier.
Certificate Number: 30515
For more detailed information, please refer to the corresponding CPI Technical Description.
Note: Specifications may change without notice as a result of additional data or product refinement.
Please contact CPI before using this information for system design.
MKT 174, ISSUE 5
10/11
PDF
-63 dBW / 4 kHz max.
-55 dBW / 4 kHz max.
1580 W max.
69 dBA typ.