The Eimac YU-182 is a medium-Mu, forced air cooled triode intended for use as a power oscillator in industrial heating applications. Characteristics Plate Dissipation (Max.) Screen Dissipation (Max.) Grid Dissipation (Max.) Frequency for Max. rating (CW) Amplification Factor Filament/Cathode Voltage Current Capacitance Input Output Feedthrough Capacitance Input Output Feedthrough Cooling Base Air Socket Air Chimney Boiler Length Diameter Weight 1.500 Watts N/A 75 Watts 30 MHz 24 Thoriated Tungsten 6.3 Volts 25 Amps Grounded Cathode 13 pf 0.8 pf 8.5 pf N/A N/A N/A N/A Forced Air 5-Pin Special SK-410 N/A N/A 5.55 in; 136 mm 3.95 in; 96.8 mm 2.5 lb; 1.1 kg Maximum RatingsTypical Operation Class of Type of ServicePlate PlatePlateScreenPlate Operation VoltageCurrent Voltage VoltageCurrent (Volts) (Amps) (Volts) (Volts) (Amps) C RF Industrial Oscillator 7,000 0.8 6,000 -550 0.65 Drive Output PowerPower (Watts) (kiloWatts) 85 2.80 The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI MPP products, visit our website at: www.cpii.com, or contact: CPI Microwave Products Division, Eimac Operation,607 Hansen Way, Palo Alto, CA 94303 telephone : 1(800) 414-8823. fax : (650) 592-9988 | email : [email protected] CPI | YU-182 4CW50,000J YU-182