The 8295A is a radial beam pentode intended for use as a linear amplifier. The anode is forced-air cooled and has a maximum dissipation rating of 1 kilowatt. Class of Operation AB1 Characteristics Plate Dissipation (Max.) Screen Dissipation (Max.) Grid Dissipation (Max.) Frequency for Max. rating (CW) Amplification Factor Filament/Cathode Voltage Current Capacitance Input Output Feedthrough Capacitance Input Output Feedthrough Cooling Base Air Socket Air Chimney Boiler Length Diameter Weight Maximum Ratings Type of Service Plate Voltage (Volts) Plate Current (Amps) RF linear amplifier 3,000 0.8 T ypical Operation Plate Screen Voltage Voltage (Volts) (Volts) 3,000 1000 Watts 30 Watts 0.5 Watt 30 MHz 3.4 Oxide 6.0 Volts 8.2 Amps Grounded Cathode 40 pf 18.5 pf 0.09 pf ----- pf --- pf --- pf Forced Air Special 7-Pin SK-184, SK-184A N/A N/A 5.05 in; 12.8 cm 4.03 in; 10.2 cm 2.8 lb; 1.27 kg 500 Plate Current (Amps) 0.8 Drive Output Power Power (Watts) (kiloWatts) 50 1.7 The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, Eimac Operation, 607 Hansen Way, Palo Alto, CA 94303 telephone : 1(800) 414-8823. fax : (650) 592-9988 | email : [email protected] CPI | 8295A CPI | 4CW50,000J 8295A