Coupled Inductors for Filter Applications • Small Surface Mount EE5 Package • Models matched to Major IC Manufacturers for Low Pass and High Pass Filters. • Operating Temperature Range: -40°C to +85°C • Isolation Voltage: 50 VAC, 60 Hz Specifications Inductance DCR Each Turns Ratio +/(coils in series) Winding Ohms 1% uH Nom Max Schott P/N Inductance (each coil) uH Tolerance % Package Schematic Note 36125 50.0 +10.5/-5.5 200 1:1 2.0 E E 5 S MD 3 36410 106.3 +/- 7.5 425 1:1 3.8 E E 5 S MD 4 36411 145.5 +/- 7.5 582 1:1 3.8 E E 5 S MD 4 36171 170.0 +/- 7.5 680 1:1 3.8 E E 5 S MD 3 36963 205.0 +/- 7.5 820 1:1 4.0 E E 5 S MD 3 37042 300.0 +/- 7.5 1200 1:1 6.0 E E 5 S MD 5 36126 340.0 +10.5/-5.5 1360 1:1 6.2 E E 5 S MD 3 37043 450.0 +/- 7.5 1800 1:1 7.0 E E 5 S MD 5 Parts availability subject to Schott manufacturing schedules and leadtimes. Not all parts available from stock. Please contact us for more details and availability. The Adobe Acrobat Reader is required to view these linked documents. Electrical Specifications Test Criteria 1. All electrical characteristics are reported for operating at 25°C. 2. Inductance is measured at 10kHz, 0.1 Vrms, Inductance Match between windings is +/- 6%. 3. Matched to Globespan Semiconductor. 4. Matched to Texas Instruments. 5. Matched to Alcatel. All data is believed to be accurate at time of printing. Schott Corporation reserves the right to make changes without notification. “Schott” is a trade name of Schott Corporation. All other trademarks and trade names are the property of their respective holder. © 2001 Schott Corporation 1000 Parkers Lake Road, Wayzata, Minnesota 55391 U.S.A. Tel: + (952) 475-1173 Fax: + (952) 475-1786 Email: [email protected] Web: http://www.schottcorp.com REFERENCE PWB PATTERN .332 .235MAX 1 6 2 5 3 4 .192 .050 .196 .146 .073 1 2 6 5 .210 MAX .146 .315 MAX NOTE: COPLANARITY < .004 (0.10) All statements and technical information contained herein are believed to be accurate, but the accuracy and completeness thereof is not guaranteed. If any product is found to be defective, Schott Corporation’s (Seller) only obligation shall be to replace such quantity of the product proved to be defective. User shall determine the suitability of the product for the intended use, and user assumes all risk and liability whatsoever in connection herewith. Seller shall not be liable for any direct, consequential, or incidental loss or damage. Conditions not specifically stated herein shall be governed by established trade customs. Schott Corporation reserves the right to makes changes without notification. “Schott” is a trade name of Schott Corporation. All other trademarks and trade names are the property of their respective holder. ©2001 Schott Corporation Schott Corporation 1000 Parkers Lake Road Wayzata, Minnesota 55391 U.S.A. Tel: + (952) 475-1173 Fax: + (952) 475-1786 Email: [email protected] Web: http://www.schottcorp.com