AN-OP2 397 Route 281 Tully, New York 13159 Phone: 315 696-6676 Fax: 315 696 9923 Email: [email protected] www.acipower.com APPLICATION NOTE 01/28/14 DRIVING OPTREX PANELS WITH ACI I-DRIVE 3 AND I-DRIVE 4 LED DRIVERS I-Drive 4 I-Drive 3 1. Identify the Optrex Panel P/N to be driven, from Table 1 below. 2. Use the ACI LED Driver specified in Table 1. 3. Output Cable Assemblies: Connect the LED Driver to the Display per the connection diagram specified in Table 1. Verify if an output cable assembly is required, to connect the driver to the display, per Table 1. 4. Input Cable Assemblies: The I-Drive 3 uses input cable assembly P/N 27-R0040 (12” length), to interface with CON1 of LED Driver. The I-Drive 4 uses input cable assembly P/N 27-R0001 (8” length); or P/N 27-R0027 (12” length), to interface with CON1 of LED Driver. Display Specifications Size # of Channels Optrex Panel P/N LED Driver Specifications 10.4” VGA (640x480) T-55532D104J-LW-A-ACN T-55532D104J-LW-A-ADN 10.4” SVGA (800x 600) T-55563D104J-LW-A-ABN T-55563D104J-LW-A-ADN 10.4” XGA (1024x768) T-55533D104J-LW-A-ABN T-55586D104J-LW-A-AAN Vf (V) Typ. (Max) Current per Channel (mA) Typ. ACI I-DRIVE 3 AND I-DRIVE 4 LED Driver P/N ACI-C = I-DRIVE 3 ACI-D = I-DRIVE 4 Output Cable Assembly (to connect driver to display) Connection Diagram 10.4” 10.4” 4 4 27 (38.7) 27 (38.7) 80 80 ACI-C150080-1968 ACI-C150080-1968 27-R0064 27-R0064 Fig. 1, Pg 2 Fig. 1, Pg 2 10.4” 10.4” 4 4 27 (35.8) 27 (38.7) 80 80 ACI-C150080-1968 ACI-C150080-1968 27-R0064 27-R0064 Fig. 1, Pg 2 Fig. 1, Pg 2 10.4” 10.4” 4 4 27 (36.0) 15 (21) 70 120 ACI-C150070-1969 ACI-C120125-1852 ACI-D120125-1837 27-R0064 27-R0064 Fig. 1, Pg 2 Fig. 1, Pg 2 TABLE 1. – Driving Optrex Panels (Part 1 of 2) Page 1 of 4 AN-OP2 397 Route 281 Tully, New York 13159 Phone: 315 696-6676 Fax: 315 696 9923 Email: [email protected] www.acipower.com APPLICATION NOTE 01/28/14 DRIVING OPTREX PANELS WITH ACI I-DRIVE 3 AND I-DRIVE 4 LED DRIVERS 12.1” XGA (1024x768) T-55566D121J-LW-A-AAN 14.1” WXGA (1280x800) T-55313D141J-LW-A-AGN 15.0” XGA (1024x768) T-55534D150J-LW-A-AAN T-55519D150J-LW-A-AAN 12.1” 4 18 (25.2) 120 ACI-C120125-1852 ACI-D120125-1837 27-R0064 Fig. 1, Pg 2 14.1” 5 24 (32.2) 90 ACI-C170090-1979 27-R0088 Fig. 2, Pg 2 15.0” 4 24 (33.2) 120 27-R0064 Fig. 1, Pg 2 15.0” 4 24 (31.6) 120 ACI-C120125-1852 ACI-D120125-1837 ACI-C120125-1852 ACI-D120125-1837 27-R0064 Fig. 1, Pg 2 TABLE 1. – Driving Optrex Panels (Part 2 of 2) Notes: 1. The ACI-C120125-1852 is an I-Drive 3 and the ACI-D120125-1837 is an I-Drive 4. These two LED Drivers are the same electrically, however the ACI-D120125-1837 has a rectangular form factor that is similar to a traditional CCFL Inverter. Please see page 3 for comparison between I-Drive 3 and I-Drive 4 form factors. Page 2 of 4 AN-OP2 397 Route 281 Tully, New York 13159 Phone: 315 696-6676 Fax: 315 696 9923 Email: [email protected] www.acipower.com APPLICATION NOTE 01/28/14 DRIVING OPTREX PANELS WITH ACI I-DRIVE 3 AND I-DRIVE 4 LED DRIVERS FIGURE 1. - Connecting LED Driver to Optrex Display FIGURE 2. - Connecting LED Driver to Optrex Display Page 3 of 4 AN-OP2 397 Route 281 Tully, New York 13159 Phone: 315 696-6676 Fax: 315 696 9923 Email: [email protected] www.acipower.com APPLICATION NOTE 01/28/14 DRIVING OPTREX PANELS WITH ACI I-DRIVE 3 AND I-DRIVE 4 LED DRIVERS 0.385 IN 0.590 IN 0.250 IN CON1 • 0.125 IN DIA HOLE (X2) PROFILE 3.500 IN 4.350 IN • CON2 0.062 IN (PCB) 0.098 IN 0.900 IN I-DRIVE 3 I-DRIVE 4 Page 4 of 4