CPW2-0600-S010B Silicon Carbide Schottky Diode Chip VRRM VRRM = = 600 600 VV Z-Rec Rectifier ® IF IF(AVG) == 1010 AA Features • • • • • • • QcQ c = = 2528 nCnC Chip Outline 600-Volt Schottky Rectifier Zero Reverse Recovery Zero Forward Recovery High-Frequency Operation Temperature-Independent Switching Behavior Extremely Fast Switching Positive Temperature Coefficient on VF Part Number Die Size Anode Cathode CPW2-0600-S010B 1.92 x 1.92 mm2 Al Ni/Ag Maximum Ratings Symbol Parameter Test Conditions Note VRRM Repetitive Peak Reverse Voltage 600 V VRSM Surge Peak Reverse Voltage 600 V VDC DC Blocking Voltage 600 V Continuous Forward Current 10 A TJ=175˚C IFRM Repetitive Peak Forward Surge Current 67 A TC=25˚C, tP=10 ms, Half Sine Wave, D=0.3 1 IFSM Non-Repetitive Peak Forward Surge Current 250 A TC=25˚C, tP=10 µs, Pulse 1 TJ , Tstg Operating Junction and Storage Temperature -55 to +175 ˚C 325 ˚C IF TProc 1 Value Unit Maximum Processing Temperature CPW2-0600-S010 Rev. D 10 min Maximum Electrical Characteristics Symbol Parameter Typ. Max. Unit Test Conditions VF Forward Voltage 1.5 2.0 1.8 2.4 V IF = 10 A TJ=25°C IF = 10 A TJ=175°C IR Reverse Current 10 20 50 200 μA VR = 600 V TJ=25°C VR = 600 V TJ=150°C QC Total Capacitive Charge 25 nC VR = 600 V, IF = 10 A di/dt = 500 A/μs TJ = 25°C C Total Capacitance 480 50 42 pF VR = 0 V, TJ = 25°C, f = 1 MHz VR = 200 V, TJ = 25˚C, f = 1 MHz VR = 400 V, TJ = 25˚C, f = 1 MHz Note: 1. Assumes RθJC Thermal Resistance ≤ 1.1˚C/W and TC ≤ 150 ˚C Mechanical Parameters Parameter Typ. Unit Die Size 1.92 x 1.92 mm Anode Pad Size 1.65 x 1.65 mm Anode Pad Opening 1.45 x 1.45 mm Thickness 377 ± 10% μm Wafer Size 100 mm 4 μm 1.8 μm Anode Metalization (Al) Cathode Metalization (Ni/Ag) Frontside Passivation 2 CPW2-0600-S010 Rev. D Polyimide Note Typical Performance 100 20 14 25°C 75°C 125°C 175°C 80 12 10 70 60 50 R IF Forward (A) IF Current (A) 16 90 TJ = TJ = TJ = TJ = IR Reverse Current (μA) I (mA) 18 8 6 40 4 20 2 10 0 TJ = 25°C TJ = 75°C 30 TJ = 125°C TJ = 175°C 0 0 100 200 300 400 500 600 700 800 900 VR Reverse Voltage (V) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 VF Forward V Voltage (V) (V) VR (V) F Figure 1. Forward Characteristics Figure 2. Reverse Characteristics 400 600 350 500 300 C (pF) 400 250 200 300 150 200 100 100 50 00 0 0 11 10 10 100 100 VR (V) Figure 3. Capacitance vs. Reverse Voltage 3 CPW2-0600-S010 Rev. D 1000 1000 Chip Dimensions A symbol B A dimension mm inch A 1.92 0.076 B 1.45 0.057 B Notes • RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. • REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. • This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, or air traffic control systems. Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. 4 CPW2-0600-S010 Rev. D Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power